Best Input Characteristic Analyzer
RockvilIe 1000 Watt Home Theater Bluetooth Receiver+(4) 3.5' Black Cube Speakers
- ... rack mountable (removable rack brackets) digital hybrid amplifier/receiver. RMS Power @ 4 Ohms: 125w x 2. Peak Power @ 4 Ohms: 500w x 2. RMS Power @ 8 Ohms: 100w x 2. Peak Power @ 8 Ohms: 400w x 2. THD: > 0.1%. Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB. Tone Characteristic: 100Hz-10KHz 12dB. 110v/220v Switchable. Inputs: lpod/MP3 - 1/8 Mini Jack Style, 1/4 Headphone Jack, 1/4" Mic 1 and Mic 2 Inputs, USB Input.
- Rear Inputs:RCA Input for DVD or CD. Rear Outputs: Preamp output for an external additional amplifier or powered speaker Sub preamp output to connect a powered subwoofer or an amplifier. Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier. Record output to connect a recording device. Bluetooth Capable.
- Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B). Built-in Pre-Amplifier. Multicolor LED Display. Digital Quartz Synthesized AM / FM Tuner with 50 Presets & Auto-Scan. Preset EQ: Rock, Pop, Classical, Jazz. Remote control for quick access to all functions. Vacuum Fluorescent Digital Output Display Meters. Separate gain controls for pre-amp & subwoo....
Check StockPortable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
- 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
- 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
- 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check StockPortable tinySA Spectrum Analyzer - AURSINC Handheld Frequency Analyzer V0.3.1 with Antenna SMA Male to UHF Female Cables & 30db Attenuator MF | HF | VHF UHF Input for 0.1MHZ-960MHz 2.8'' Touchscreen
- [2022 Upgraded Version: ESD Protection Diodes] Produced by Hugen, portable spectrum analyzer with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. NOTE: Due to the old inventory might mix with the new batch, and If you got the old version Tiny spectrum analyzer and want a new one, you could apply a replacement for it..
- [Frequency Range] Spectrum analyzers like the Tiny spectrum analyzer use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
- [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The Tiny spectru....
Check StockUpgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1
- 003cp003e◙【003cb003eBuilt-in 2-in-1 Calibration Signal Generator003c/b003e】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.003c/p003e.
- 003cp003e◙【003cb003e Frequency Range003c/b003e】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.003c/p003e.
- 003cp003e◙【003cb003ePC Control003c/b003e】This spectrum analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.003c/p003e.
- 003cp003e◙【003cb003ePortable Spectrum Analyzer & ESD Protection Function003c/b003e】The latest version 3.1, new ESD protection function, insta....
Check StockPortable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator
- [2021 Upgraded Version: ESD Protection Diodes] Tinysa with latest firmware V0.3.1, the displayed version info is "ESD protected" meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
- [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
- [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of....
Check Stock2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1
- ✅【2023 Upgraded TinySA Ultra】:This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage..
- ✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields..
- ✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration..
Check Stock2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM
- ✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
- ✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
- ✹✹Input voltage range: -0.5V to 5.25V.
- ✹✹ART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
- ✹✹his item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
Check StockAoicrie USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug Professional Microcontroller Debug USB Powered FPGA for ARM FPGA M100 SCM
- This item is an logic analyzer designed to be compatible with Logic Analyzer software, The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
- Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
- Input High Voltage: 2.0V to 5.25V, Input Impedance: 1Mohm || 10pF (typical, approximate).
- A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high, Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended.Error/Accuracy: pulse-width measurement: +/- 42ns (at 24MHz)..
- UART, SPI, IIC and other communication debugging, 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.Suitable for single chip development,ARM system development,FPGA development..
Check StockAudio Metering Measurements Standards and Practice Audio Engineering Society Presents
- Configurable Display Colors and Number of Frequency Bars.
- Analyzes Input from built in microphone, or other devices attached to the Line-in input..
Check Stock35?4400MHz Portable Spectrum Analyzer,3.5 ”TFT Handheld Frequency Analyzer Amplitude Bandwidth Frequency Signal Generator,Tracking Generator Steps Sweep Signal Generator (PLZ-SA354400A 3.5inch LCD)
- [ Accurately Track ] This portable spectrum analyzer 35‑4400MHz Equipped with a tracking source TG, the frequency of the signal output by the tracking source can accurately track the tuning frequency of the spectrum analyzer..
- [Output Range]35MHz‑4.4GHz signal source output range, can display and analyze a simple spectrum.The input dBm scope is -80dBm~0dBm, output dBm is 0dBm..
- [4 Major Modes ]Four major modes: Network mode, Spectrum mode, Point frequency mode, Sweep mode. After power on, the default mode is Network mode..
- [3.5 Inch Touch Display ] Touch function, without button operation, you can directly click on the touch screen to operate..
- [Portable ] Handheld spectrum analyzer Easy to carry and tiny , powered by USB-C cable,it can be easily hand‑held for measurement or carried to various places.Made of aluminum alloy material, wear resistance and can provide long service time..
Check StockVibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey
- TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
- MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
- FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
- LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
- APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check StockRockville REQ42-B Black 19 Rack Mount 2 x 21 Band Equalizer w/Spectrum Analyzer
- Rockville REQ42-B Black 19" Rack Mount 2 x 21 Band Equalizer w/Spectrum Analyzer.19" Rack Mountable.
- Dual Channel 21+21 Band Graphic Equalizer (total of 42 bands).
- Blue LED on each Equalizer Slide Control.
- RCA stereo input: DVD/Tape/Tuner/Aux-MP3 with Front Panel Selector Switch.
- RCA Stereo Record Output. Front Panel 3.5mm iPod/MP3 Player Input Jack.
Check StockSignal Generator, Multi-Function LHT00SU1 Oscilloscope 2 Channel Input Virtual Oscilloscope Logic Analyzer USB Logic Analyzer
- 【Supported Protocols】Serial Peripheral Interface, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2.
- 【Multi Purpose】8-channel logic analyzer, Data Logger. PWM controller, Frequency generator. Frequency meter, Remote controller.
- 【Dual Channel】Dual channel voltmeter, Mixed signal oscilloscopes and logic analyzer, Dual input oscilloscope (single, 16Msps, 3MHz bandwidth).
- 【Frequency Meter】PWM controller, Frequency generator. Frequency meter, Remote controller.
- 【100% Guarantee】High quality product, we promise to do everything possible to satisfy all customers. However, if you are not 100% satisfied with our service or our products, simply contact us. We are always at the side of our customers to support and continuously seek new ways to improve.
Check Stock