Comparator Dual177;18V/36V 8-Pin SO N T/R
- Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
- Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
- Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check StockSonghe LM2596S LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module 5pcs
- This module can be applied to fields in the input voltage is higher than the step-down output voltage, such as batteries, power transformers, DIY....
- With a voltage meter and voltmeter displays self-calibration. Uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (To....
- Touch of a button to switch the input or output voltage measurements and has a light show which is being measured voltages, and save the settings,....
- Input Voltage 4.5~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more).
- Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V).
Check StockTexas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack
- Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
- Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
- Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check StockTexas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)
- Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
- Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
- Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
- Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check StockDS18 3AVS 14.4V Car Audio Stabilizer Constant Steady Output Voltage
- DS18 3 amp Volt stabilizer - input any voltage between 6-16v and get steady output at 14.4V..
- Wide voltage input, steady output voltage @ 14.4V..
- Strong performance, high reliability, & best preset voltage.
- Input voltage range: 6-16v. Output voltage: constant 14.4V..
- Voltage stabilized accuracy: 003c 0.5%. Ripple factor: 003c 0.1%. transfer efficiency: 003e 85%..
Check StockBuck Converter 12v to 5v, DROK 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging
- DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V (5V-5.3V available according to your input voltage)..
- The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency..
- Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices..
- The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple..
- Note: Input different voltage will output different power: input DC 9-24V, output 5.2V/6A/30W.
Check StockDC Buck Boost Converter, Drok 5V-30V Step Up Down to 0.6-30V Digital Control Power Supply, 6V 12V 24V Voltage Regulator, LCD Digital Display Buck Boost Module Voltage Transformer for Golf Cart
- Output Power: 35W, Can Reach 50W If Add a Cooling Fan..
- Display --- Digital LCD Display, Clear & Convenient to Watch..
- Protection --- Over Voltage Protection(OVP).
- Note --- When Input Voltage is Lower than 4.7V, it will trigger Low Voltage Protection. Recommend to use at Input > 7V. If Input Voltage < 7V, OutPut Power will be reduced..
Check StockJuried Engineering LM393P IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 1)
- Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
- Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
- Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
- Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check StockValefod DC to DC High Efficiency Voltage Converter 24V to 12V 40A 480W Buck Converter DIY Power Supply Step-Down Transformer
- 【High-grade DC-DC Buck Converter】It adopts premium quality electronic components and waterproof (IP68) aluminum housing. Widely used for golf cart, club car, motor, speaker, GPS, car display screen, LED strip light, air-conditioner, electric fan, solar energy, DVD and other devices that requires DC 12V voltage..
- 【Input Voltage】 DC 24V (Input Range: 18V to 36V). A stable DC power is recommended as the input power supply, and the rated voltage supply should be within the voltage range of 18V to 36V..
- 【Output Voltage】DC 12V (Output Current: 40A). Please NOTE the output voltage/current/power is rated..
- 【Multiple Protections】Built-in over-temperature, over-current, over-voltage, output short- circuit protection to ensure your devices safely..
- 【Easy to DIY】Connect INPUT wires to power source, OUTPUT wires to your load device. The wiring diagram is labeled on the back of buck converter. Please don't power on before completing the circuit and connection, do not reverse the input and output interface. ※ Two INPUT wires = Red wire(positive pole) + Black wire(negative pole). ※ Two OUTPUT wires = White wire(positive pole) + Black wire(negative pole)..
Check Stock3pcs High Voltage Generator DC 6-12V to 1000kV Boost Step-Up Inverter Arc Pulse Generator Power Module High Voltage Transformer (1000 KV)
- High Voltage Generator:Input Voltage: DC 6V to 12 V.
- High Voltage Generator Cables: Output Cable Length: About 100mm.
- Input Cable Length: About 100mm(Red is Positive).
- High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
- Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
- Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..
Check StockDasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer
- 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
- ultra-low input and output pressure difference..
- 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
- 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
- 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
- the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
- 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check StockJuried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 3)
- The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
- Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
- Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.
Check StockJuried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 10)
- The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
- Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
- Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
- Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.
Check Stock