Best Input output Isolation
Miller 191941 Transducer, Current 200A Module Supply V +/- 15V
- Straight-through structure design, isolation withstand voltage up to 2000V..
- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
- Self-powered, no external power supply required..
- Measured current AC 0-10/20/50A, output signal DC 0-5V..
- Easy to install and use, no need to connect DC into the circuit when measuring..
Check StockLoulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-300V AC with 3-Output 0-5V DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC513V).
Check StockCHAUVET DJ Data Stream 4 DMX-512 Optical Splitter with (4) XLR-XLR Cable Bundle
- One input to four outputs (3-pin and 5-pin).
- Additional thru output (3-pin and 5-pin) for linking to other data streams.
- Electrical isolation between input and output.
Check StockIsolation Amplifiers Isolated Modulator (5 pieces)
- ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
- ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
- ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
- ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
- ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check StockLoulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-450V AC with 3-Output 4-20mA DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC520V).
Check StockCurrent Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
- The measured current of this current transmitter is AC 0-10A/20A/50A.
- The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
- With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
- through‑core structure design, isolation withstand voltage up to 2000VAC.
- hysteresis less than 1%, can be used under strong magnetic field conditions..
- The shell is made of self-extinguishing material ABS.
- it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check StockASI ASI451141 4-20mA Analog Signal Splitter, 1 Input, 4 Output
- 4-20mA Single input with quad output Analog Signal Splitter.
- 3-Way isolation between power supply, input and each of the 4 outputs to eliminate interference.
- Din rail mounting for quick installation.
- Zero and span adjustment for precise calibration.
- Screw clamp terminations for easy wiring.
Check StockTripp Lite IS1000HG Isolation Transformer 1000W Medical Surge 120V 4 Outlet TAA GSA
- Complete line isolation, noise filtering and surge suppression.
- 1000 watts, 4 5 15R HG hospital outlets, 10 feet power cord with NEMA 5 15P HG plug.
- Internal low impedance isolation transformer with Faraday shield offers 100 percent isolation from the input AC line.
- Floating AC output prevents noise coupling.
Check Stock10Pcs Audio Transformers 600:600 Ohm 1:1 EI14 Isolation Transformer
- 5kVA STEP-DOWN ISOLATION: 5kVA 5kW transformer converts UPS, utility, generator or other 208V input to 120V for powering low-voltage AC components..
- 12-OUTLETS: It features 12 NEMA 5-15/20R outlets for connecting equipment with common NEMA 5-15P and NEMA 5-20P plugs. Four resettable 20A circuit breakers protect your low-voltage equipment against overload conditions. One NEMA L6-30R outlet supports high-voltage output. The 5kVA transformer’s 10-foot power cord with 208V 30A input connects to a NEMA L6-30R outlet..
- 2U INSTALLATION: Hardware is included for mounting this 208V to 120V isolation transformer in 2U of space in an EIA-standard 19-inch 4-post rack with a maximum depth requirement of 20.75 inches..
- TAA-COMPLIANT UPS: The voltage transformer is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases..
- SU5000XFMR2UTAA SmartOnline Step-Down Isolation Transformer.
Check Stock100-2700M Frequency RF Power Splitter 2-Way Divider Combiner Signal Power Splitter
- STABLE PERFORMANCE: It has wide working frequency, small insertion loss, high gain and isolation, stable performance. Our products are 100% new to ensure your best use experience..
- CHANNEL OUTPUT: There should be certain isolation between output port of a power splitter, it can also be used as a combiner, that combined signals into one channel output..
- PRODUCT FEATURE: The power splitter can split one channel input signal into two channel output equal or unequal signals. Basically meet your needs, you can rest assured to buy..
- PASS STRICTLY TESTED: This product has passed strictly test which test appearance, structure, product, packaging, quality, safety performance, material hazard indicators of the product..
- GOOD SERVICE: Please feel free to contact us for your any problems about our product, we will reply in the first place. It is our pleasure to service you, do not doubt your importance to us..
Check Stock8-Channel Optocoupler Isolation Board, DC 3.3V 5V Driver Photoelectric Isolated Module PNP NPN Signal Converter Low High Level Output
- NPN / PNP (Low/High level) signal output..
Check StockPHc ISO-300 300 Watts AC Isolation Transformer with Pass-Through Grounding
- NOTE - Grounding pass through and bypasses the isolation, which means the grounding isn't isolated.
- 3-prong to 2-prong adapter (not included) may be used for complete cut-off.
Check StockLIVISN No-Source 2-Wire 4-20mA Current Loop Signal Generator Panel-Mounted Current Transducer, Compatible with 2,3,4 Wires
- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
- Measured current AC 0-10/20/50A, output signal DC 0-10V..
- Easy to install and use, no need to connect DC into the circuit when measuring..
- Self-powered, no external power supply required..
- Straight-through structure design, isolation withstand voltage up to 2000V..
Check Stock