Categories

Best Inserts For Wood

E-Z LOK Knife Threaded Insert for Hard-Wood Brass Thread Inserts M6-1.0 Internal Threads 0.500 Length Pack of 10

  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
Check Stock

E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 1/4-20 Internal Threads, 0.625' Length Pack of 10

  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
Check Stock

E-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16

  • THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

  • 20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
  • Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
  • Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
  • Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
  • Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..
Check Stock

1/4-20, 5/16-18, 3/8-16 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 143 Pieces 1/4'-20, 5/16'-18, 3/8'-16 Threaded Inserts Kit with Hex Wrench

  • 【Detailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
  • 【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
  • 【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
  • 【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. O....
Check Stock

1/4-20 Threaded Inserts for Wood T Nuts 1/4-20 Bolts Fully Threaded Button Head Hex Socket Screws 1 1-1/4 and Washers

  • This kit contains 40-Piece of 1/4-20 Threaded Inserts - 3/5" Length, 20 Piece of 1/4-20 tee nuts - 2/5" length, 30-Piece of 1/4-20 Bolts - 1" length, 10-Piece of 1/4-20 Bolts 1-1/4" length, 40-Piece of 1/4-20 washers..
  • 1/4-20 threaded inserts and t nuts are made of Carbon Steel ,zinc plated. 1/4-20 bolts and washers are made of stainless steel, they feature corrosion-resistance and rust-resistance..
  • Drilling Size for threaded inserts: ~soft wood - 23/64", if small, use 3/8", ~ hard wood - 3/8", if small, use 25/64"..
  • T nuts are great for furniture making and many wood project while leaving a flush surface, Barrel Height: 5/16″/ 7.9mm, Flange Diameter: 11/16″/ 17.5mm, Barrel diameter: 5/16″/ 7.9mm, Overall Height: 3/8″/ 9.5mm..
  • Wood threaded insert kit with screws, washers and t-nuts is ideal for wood furniture repair projects..
Check Stock

Jet, Small Grizzly, Powermatic 64 Table Saw Zero Clearance Insert by Peachtree Woodworking PW956 Approx Dims 12-1/2 in x 3-1/2 in x 7/16 in

  • MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown..
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade..
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywoo....
Check Stock

Hahiyo Screw in Nut Threaded Inserts M8 Bolt Fastener Connector Hex Socket Drive Keep Straight Turn in Cleanly Flush with Project Surface Easy to Install for Wood Furniture Zinc Alloy 18pcs

  • The threaded inserts can open and close a panel without damaging the wood.Go in cleanly.They won’t strip out of your projects.These go into hardwood also won't spend much time and the top has a flared edge to countersink flush with surface,good for parts that articulate closely with others.A solid way to affix the legs.They are easy to back out if necessary..
  • Easy to install:the threads on the inside and outside are both spot on.They will keep straight and the bolts turn in easily.You just need to drill a clean hole for the inserts,and then use an L bracket to attach these fasteners to lock down your project,you can wiggle the screw around in a small circle to position once it is fully in.They will fit in very snugly.Particularly convenient for handle..
  • Very sturdy:the threaded Inserts are solid,and threads are sturdy.They won't come loose or tear out.The threaded inserts to be more durable than brass ones when used in plywood.The bolts threaded will right into the wood well.Strong wood inserts and tight thread tolerance can make your projects long-lasting..
  • Versatile use:the threaded Inserts are playing a very important part role in many home projects.Suitable for repairing poorly-constructed cabinets,closet,knock-down furniture,woodworking projects,....
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

SG TZH 173Pcs Threaded Inserts for Wood Nutsert Screw 1/4-20 x 10mm/15mm/20mm/25mm Hex Drive Furniture Wood Nuts Assortment Set (with Hex Spanner-Bronze)

  • RICH PACKAGES AND PARAMETERS - SG TZH package contains 173Pcs, 4 different types of wood thread inserts: 1/4” -20x10mm 60 pieces.
  • 1/4" -20x25mm 25 pieces, inserting head ⌀: 0.46 inches, body ⌀: 0.32 inches, thread ⌀: 0.41 inches, inserting head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, thread ⌀: 0.413" / 10.5mm..
  • FIRST-CLASS QUALITY AND EXQUISITE CRAFTSMANSHIP - This threaded inserts for wood are made of high-quality carbon steel, the surface is plated with yellow zinc, has excellent hardness and wear resistance, is not easy to rust and oxidize, and the standard hex socket head is smooth, with flanged thread texture, more stable and non-slip..
  • EASY TO USE AND INSTALL - Our threaded inserts are easy to use, just drill a hole of appropriate size at the place of use, and then use a hexagonal wrench or other optional drive tools to install (Tips: recommended hole diameter 9.6 +/- 0.2mm, if high-hardness wood, please enlarge the hole).
  • WIDE RANGE OF APPLICATIONS - The 1/4"-20 threaded insert kit meets your needs and are perfect for all kinds of furniture. In Soft wood, recommended drill bits for this threaded inserts are 8.5mm, 9mm. In Hard wood such as white oak or maple....
Check Stock

Upgraded Helical Cutterhead for 13' DeWalt Planer DW735 DW735X Planer

  • ...gest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads..
  • LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost saving..
  • BRAND QUALITY WARRANTY-Package included 1 x 13” helical cutterhead.
  • 56 x screws, 1x screw driver, one-year warranty which assures the unit is free from factory defects. The TJATSE Customer Service and Technical Support Teams are all days online for help..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock