Chicago Pneumatic CP828 3/8-Inch Air Ratchet

  • WORK WITH POWER: Stubborn seized bolts come loose with the power behind our impact air ratchet.
  • ESSENTIAL AIR RATCHET TOOL: Large impact wrenches over torque engine bolt, causing stripping.
  • With an even 50ft/lbs with our 1/4 ratchet you’ll get power without breaking bolts.
  • EFFICIENT 1/4 RATCHET WRENCH: The sealed head of the ratchet housing prolongs the life of the compact air ratchet.
  • Consumes a low 3.1 CFM and outputs 90 PSI for even torquing.
  • COMPATIBLE: Affix your selected socket to the 1/4 drive air impact wrench ratchet easily.
  • This small air ratchet's compact and light weight design makes applicable in tight spaces.
  • SUPERIOR FUNCTIONALITY: This ratchet features a hammer clutch to reduce reaction force.
  • A reverse and forward function allow for adequate force for removing and installing bolts.
Check Stock

Craftsman Set of Two 187292, 192870, 532187292, 532192870 Spindle Assembly with Grease Zerk, Husqvarna Poulan

  • Set of two spindle assemblies, includes blade bolts, mounting bolts, pulley locknuts, spacer..
  • Mounting holes have been pre-tapped for easier installation..
  • 187292 are the spindle assembly's with grease fittings. Replace the non-grease fitting 192870 with these also..
  • Spacer must be installed under the pulley..
  • Installing with the spacer on top of the pulley (or failing to use spacer) will result in damage to shaft and pulley..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's(1999 & Newer )With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Seeutek PK80 80cc Bicycle Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade with Speedometer

  • ...bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Notes:The rider needs basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments. If you do not have experience or the first time on installing the motor kit, before installing, please kindly read our instruction and search "80cc bicycle engine kit" on youtube, it will give a big help and troubleshoot a lot of issues during installation process..
Check Stock

8 Sets 5/16-18 Stainless Steel Hex Button Head Cap Screws Bolts Nuts And Flat Washers Snowblower Skid Shoe Mounting Bolts Accessories Kit for MTD 784-5580 710-0451 736-0242 712-04063 5/8 Inch

  • The package includes: you will get 8 sets of stainless steel hex button head cap screws bolts, nuts and flat washers, which is sufficient to meet your....
  • Reliable material: the snowblower skid shoe mounting bolts accessories kits are made of 304 stainless steel, which is sustained and....
  • Widely applicable: the stainless steel hex button head cap screws accessories are very suitable for installing the skid shoe plate and can replace....
  • Universal size: the size of the stainless steel snowblower skid shoe mounting bolts accessories is about (5/16-18) 5/8", which is suitable for most....
  • Easy to use: the snowblower skid shoe mounting bolts assortments are easy for you to use, they can be safely installed and released, you just need to....
Check Stock

BETOOLL 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts.
  • This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt..
  • Use with square socket driver.> 1/2" square drive use with breaker bar.
  • Designed with hardened chrome molybdenum steel construction.
  • Backed by a lifetime replacement guarantee..
Check Stock

Lunsom Spike License Plate Fastener Screw Caps, Bolts Screws Fit Vehicles Motorcycle Trucks,4 PCS(Black)

  • 【Good Performance & Durable】The license plate bolts are made of awesome quality and light weight aluminum material,mostly used for the modification, fastening, reinforcement and decoration of motorcycle parts..
  • 【Safety & Easy Installation】The advantage of license plate screw can not be directly unscrewed after installation, to ensure the safety of license plate.No additional tools are required during installation, and it can be tightened directly..
  • 【Nice-looking & New Style】Pointed windshield bolts give your bike a smooth new look.After installing this license plate screw, it can not only protect your license plate, but also make your car look new and have a new style..
  • 【Package Contains】License plate fastener fits most motorcycles,cars,trucks,SUV etc,and comes with 8 washers, 4 gaskets, 4 bolts, 4 nuts,which can meet your daily needs..
  • 【Customer Service】If you have any questions about the product, please contact us in time and we will provide you with advice..
Check Stock

Lunsom Spike License Plate Fastener Screw Caps, Fasteners Motorcycle Car Tag Bolt Kit 4PCS,(Black)

  • 【Good Performance & Durable】The license plate bolts are made of awesome quality and light weight aluminum material,mostly used for the modification, fastening, reinforcement and decoration of motorcycle parts..
  • 【Safety & Easy Installation】The advantage of license plate screw that can not be directly unscrewed after installation, to ensure the safety of license plate.No additional tools are required during installation, and it can be tightened directly..
  • 【Nice-looking & Simple Style】Pointed windshield bolts give your bike a smooth new look.After installing this license plate screw, it can not only protect your license plate, but also make your car look new and have a new style..
  • 【Package Contains】License plate fastener fits most motorcycles,cars,trucks,SUV etc,and comes with 8 washers, 4 gaskets, 4 bolts, 4 nuts,which can meet your daily needs..
  • 【Customer Service】If you have any questions about the product, please contact us in time and we will provide you with advice..
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

DCT Tee Bolt Set – 20 Pack 1in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

  • ...e is precision machined for quality, strength, and accuracy.
  • T shaped head features a 7/16 x 5/8 inch (11 x 16mm) surface and a 3/32 inch (2mm) thickness and fits inside T-slot track or wooden groove.
  • These furniture bolts and barrel nuts are ideal when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels.
  • BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
  • Zinc-plated for resistance to rust and corrosion.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten.
  • PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1 inch (2.5 cm) and a thread per inch of 20.
  • The diameter of the bolt stem is 1/4 inch (.6 cm).
  • EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

Lunsom License Plate Fasteners, 4 Pack Skull Shape Frame Kit Replacement Car Tag Screw Bolts Fit for Most Motorcycles Vehicles Truck SUV(Blue)

  • 【Good Performance & Durable】The license plate bolts are made of awesome quality and light weight aluminum material,mostly used for the modification, fastening, reinforcement and decoration of motorcycle parts..
  • 【Safe-using & Easy to Install】The advantage of license plate screw can not be directly unscrewed after installation, to ensure the safety of license plate.No additional tools are required during installation, and it can be tightened directly..
  • 【Skull Looking & Unique Style】Pointed windshield bolts give your bike a smooth new look.After installing this license plate screw, it can not only protect your license plate, but also make your car look new and have a new style..
  • 【Package Included】License plate fastener fits most motorcycles,cars,trucks,SUV etc,and comes with 8 washers, 4 gaskets, 4 bolts, 4 nuts,which can meet your daily needs..
  • 【Customer Service】If you have any questions about the product, please contact us in time and we will provide you with advice..
Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized,The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock