Categories

Best Insulate Cable Wire Grip

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35931 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 3400lb Approximate Break Strength, 14.00\ Mesh Length, .50–.74\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 14 in. mesh, double weave and split lace design with 0.50-0.74 in. cable diameter. It has a break strength of approximately 3400 lb..
Check Stock

Woodhead 35935 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 8100lb Approximate Break Strength, 26.00\ Mesh Length, 1.50–1.99\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 26 in. mesh, double weave and split lace design with 1.50-1.99 in. cable diameter. It has a break strength of approximately 8100 lb..
Check Stock

Woodhead 35905 Pulling Grip, Light Duty, Flexible Eye, 5800lb Approximate Break Strength, 17.00\ Mesh Length, 1.25–1.49\ Cable Diameter

  • Flexible Cable Grip: this wire mesh pulling grip features a flexible eye design, which enables it to work perfectly in generous and tight spaces.
  • Shoulder Protectors: the cord grip features shoulder protectors across the center of the grip within a raceway to ensure a bump less pull and long-life operation.
  • Superior Strength: manufactured using galvanized steel, the wire supporting grip is resistant to rust and corrosion and thus offers extended durability. This electric mesh grip is designed for applications requiring additional strength.
  • Easy Installation the smooth and thin profile of wire mesh grip makes it easy-to-use, quick-to-install and reusable.
  • Specifications: the light duty pulling grip has a cable diameter of 1.49 in. and maintains a pull capacity of 5800 lb. This single weave wire mesh grip has a mesh length of 1.41 in..
Check Stock

IDEAL Electrical 45-025 Lil’ Ripper Stripper – Wire Stripper w/ Slitting Blade, V-Notch, Flat Blade Clip

  • Cable Stripping Tool: designed to strip the outer jacket of NM cable cleanlyand quickly, this wire stripper is a portable handheld tool used by electricians for removing the protective coating of an electric wire to replace or repair it.
  • Precise Cutting: this wire stripping tool has flat blade that clips outer sheathing to remove excess wire jacket. This stripper has a V-notch that strip the outer jacket off the inner wires cleanly.
  • Ergonomic Grip: the electrical cable stripper has a slip resistant molded elastomer handle that ensures non-slip grip for clean and quick rip, cut or strip of the outer jacket of the NM cable.
  • Added Features: the cable stripper has looping holes that provide the perfect loop for screw-on devices. It has Twist-Assist wire connector wrench at the end of the tool ensures quick tightening of most twist-on connectors.
  • Product Specifications: the IDEAL electric wire cutter perfectly fits in the palm and does not weigh down you tool belt..
Check Stock

Knipex 74 21 250 High Leverage Diagonal Cutters 9,84\ 12° angled

  • Material--The Cable Cutter is manufactured from 55# steel and is hardened for durability and strength..
  • Special Design--Cable Cutters Heavy Duty with optimal geometry blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable.
  • Convenient--Cable wire cutter is easy cutting with one hand operation.
  • Comfortable Handle--Compact cable cutter comfort grip handles for extra comfort and grip during use..
  • Application--Cable cutter stripper provides outstanding cutting performance on solid copper wire, twisted pair and coax cables..
Check Stock

Woodhead 36575 Support Grip, Service Drop, Single Eye, 500lb Approximate Break Strength, 5.00\ Mesh Length, 5.00\ Bale Length, .30–.43\ Cable Diameter

  • Service Drop Grip: this single weave mesh grip attaches to any fixed structure with ease. Single weave mesh design offers maximum strength, eliminating the need of an additional hardware.
  • Mesh Material: service drop cable strain relief grip is made using Tinned-Bronze wire mesh that offers corrosion resistance. This pulling grip finds application in light-duty cable placement.
  • Durability: the tinned-bronze support grip has top-mounted eye protector and closed mesh design that boosts durability, stability, and gripping strength.
  • Application: wire support grip is used for the service entrance cables, and for the repositioning of any fixed or moving structures.
  • Specifications: single eye cable support with 5.00 in. bale length has a mesh length of 5.00 in. and an approximate break strength of 500 lb. It has a cable diameter is 0.30–0.43 in..
Check Stock

Cable CuttIng Pliers 8inch High Leverage Cable Cutters High Carbon Cable Pliers Precision Cable Wire Cutters for Cutting Coaxial Cable, Aluminum Copper and Communications Cable

  • Material -- Cable Cutter Pliers are manufactured from high-carbon steel and is hardened for durability and strength..
  • Rubber Handle -- Heavy duty cable cutters with comfort grip handles for extra comfort and grip during use..
  • Feature – cable cutter stripper’s blades slice through cable rather than crushing. Easy cutting with one hand operation. Low effort require offers long lasting durability.
  • Application -- compact cable cutter is designed to cut copper wire, twisted pair and coax cables.
  • Kind Remention – Electric cable cutters are non-insulated, pls cut off the power before using this heavy duty wire cutters.and pls do not use the coaxial cable cutter to cut hard material and steel wire, etc..
Check Stock

Termight Series 1/2in Pulling Grips, Each

  • Wire pulling grip used to run cable from one room to the next.
  • Easy to use! Simply drill through a surface and attach the wire pulling grip to the hole in the tip of a flex drill bit (sold separately).
  • Secure wire snugly in wire pulling grip, flip drill into reverse, and pull wire back through with drill bit.
  • Swivel mechanism allows drill to spin while not twisting attached wires – no worries about mangled wires!.
Check Stock

Wire Cutter 3D Printer Parts Electrical Wire Cable Cutters Cutting Side Snips Flush Pliers Nipper Hand Tools For 3D Printer

  • 3D Printer Parts Electrical Wire Cable Cutters Cutting Side Snips Flush Pliers Nipper hand tools For 3D Printer.
  • Light weight, thin profile and easy handling insulate grips comfortable for operation..
  • Used in multi functional 3D printer electronic industry repair, jewelry processing, model making and fishing, etc..
Check Stock

Multifunctional Wire Stripping Pliers Electrician Special Pressing Repair Line Mult Cable Decrustation Peeling Tool Cutting

  • ➤Precise peeling hole design. When stripping, the cut of wire skin shall be neat and the core shall not be easily damaged..
  • 2. It is made of high-quality alloy steel, with overall heat treatment, high hardness, sharp cutting edge, strong shearing force and durability..
  • ✂️【Multifunctional Wire Stripper Tool】Use it for stripping, cutting of copper wire, aluminum wire, sheathed core wire, cable, cutting bolts and insulated terminal electrical crimping..
  • 5. Suitable for thin cable, wire stripping, cutting, etc..
  • ✂️【Comfortable Handle】Handle is made of non-slip PVC material, gives you a comfortable grip experience. Textured grip handles for maximum comfort and reduced hand fatigue. You can grab, hold, pull andouter jacket makes clean cuts on wires with only one hand..
Check Stock

Creativity PLATO 170 Blue Flush Cutter Mini Diagonal Cutting Pliers Side Cutter Nippers Wire Cutter

  • ❤【High Hardness Cutting Pliers】: Special high-speed tool steel forging, sturdy, durable and sharp..
  • ❤【Reasonable Design】: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. PVC insulate handle provides comfort grip to protect your palm..
  • ❤【Slip resistance and Light weight】: Side Cutting pliers with a non-slip spring rubber handle, easy to operate.Small and light, easy to carry. Flush cutter can be easily put into the tool bag and does not take up space..
  • ❤【Wide range of applications】: Precision miniflush cutters is suitable for electric wire, electronic pin, trimming plastic parts, cutting small iron wire, electronic repair and jewelry processing etc..
  • ❤【100% Satisfaction】: Whenever you buy, we believe it will not disappoint you, you will be very satisfied, all you need to do is put it in the shopping cart..
Check Stock