Categories

Best Insulated End Terminal

MILAPEAK Terminal Block and Strip - 10pcs 5 Sets 5 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 5 Positions Pre-Insulated Terminals Barrier Strip Black & Red

  • ★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install.....
  • ★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite.....
  • ★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be....
  • ★【Easy Install】- The terminal strips are easy to install and held in place by two screw holes at either end of the terminal. Standard spade....
  • ★【What You Get】- 5 x 600V 25A 5 Positions Dual Row Screw Terminal Strips, 5 x 400V 25A 5 Positions Pre-Insulated Barrier Strips (Red: 2, Black:....
Check Stock

(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001

  • Gas Range Oven Replacement Viking Ignitor AR04001.Replaces part # PB040001..
  • Included with this ignitor is:1 Ignitor/2 Ceramic Wire Nuts/2 Wire Assemblies, with Female Insulated Terminals.
  • This is a Flat Bar Syle Ignitor./The White Ceramic part of the ignitor measures 2-1/4" Long..
  • The Ignitor part (the part that glows) measures 2" Long.The overall length from end of ceramic to end of the metal bracket is 4-1/2"..
  • The 2 wires measure 12-1/2" Long from terminal end to ceramic..
Check Stock

MILAPEAK 10pcs (5 Sets) 6 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 6 Positions Pre-Insulated Terminals Barrier Strip (Black & Red)

  • ...r by using the whole barrier bar or part of it up to 6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals..
  • ★【What You Get】- 5 x 600V 25A 6 Positions Dual Row Screw Terminal Strips, 5 x 400V 25A 6 Positions Pre-Insulated Barrier Strips (Red: 2, Black: 3), our worry-free 12-month and friendly customer service. Also available 12 gauge,14 gauge, 16 gauge, 18 gauge, 20 gauge High Performance Silicone Wire in our store..
Check Stock

OTC 4614 5/16 Inch Side-Terminal Battery Wrench for GM Vehicles

  • Designed for use on GM side-terminal batteries or any 5/16 inch hex head battery bolt - perfect for the tight spaces often found under modern vehicle hoods.
Check Stock

Qishare 15 Pcs Dual Row 4 Position Screw Barrier Terminal Block 600V 15A + 400V 15A 4 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs(15A 4P)

  • 400V 15A 4P Fork Type Terminal Stripe, Material: Brass, PVC..
  • 600V 15A 4P (Dual Row) Barrier Terminal Block,Strip Material: Brass, Screw: Zinc plated Iron..
  • Each pair of barrier terminal block is insulated from the next, prevent circuit in disorder. The furcate pre-insulated terminal is easy to connect with electrical wire to strengthen its reliability and safety..
  • Base with high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable..
  • Package included: 5 x Barrier Terminal Block.
Check Stock

Ferrule Crimping Tool VLIKE Wire Crimper Pliers with 1200 Terminal Ferrules Connector Sleeves for Stripper Wiring Projects

  • Complete Crimp Tool Kit – Every order comes with a crimping tool and 1200 insulated wiring terminals to support small DIY projects and large....
  • Ergonomic Handle Design – The handle with nylon material, non-slip, and using the leverage theorem, the operation more effort..
  • Square Crimping Pliers – For insulated and uninsulated sleeve terminals, wire ferrule & end sleeves 0.25-10mm², ferrule crimper AWG23-7 HSC8 6-4..
  • Professional Craftmanship – This crimping tool makes short work of terminals and connectors for electricians, contractors and builders..
  • Self adjustable Crimper Plier Tool – According to the requirements of the terminal, it automatically adjusts itself to the appropriate diameter for....
Check Stock

yueton 100pcs Female Fully Insulated Wire Crimp Terminal Nylon Quick Connectors Wiring Spade (Female)

  • Female Fully Insulated Wire Crimp Terminal Nylon Quick Connectors.
  • Durable female fully insulated nylon quick disconnects.
  • Top of the line with electro-tin plated copper cores to prevent corrosion & engineered to hold the strongest crimps.
  • Pack of 100 Female Fully Insulated Wire Crimp Terminal.
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  • 【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
  • 【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of  nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
  • 【8in Aluminum DIN Rail】Length : 203mm/ 8".
  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
Check Stock

HDMI Solderless Signals Terminal,Gelrhonr Gold Plated HDMI Free Welding Connector Breakout Board with Breakout Plastic Cover,Screwdriver

  • ✪ HDMI Solderless Signals Terminal:No soldering needed! All signal ports is printed with wire number on both sides of the board for quick wiring,which is really nice because we sometimes forgetting the sequence..
  • ✪ HDMI adapter signals terminal is equipped with a crimping ringof tail pipe. Make sure that the cable is pulled in use without causing dropped wires or poor contact.Suitable for the cable up to 10mm.
  • ✪ The breakout board comes already installed in a plastic hood enclosure with a openable cover.For a wire holder for fixing cable and avoiding twisting.Snap-on construction that opens and closes easily and is sturdy and secure after closing..
  • ✪ Compact design and reliable connection, solderless type, Adopt environmentally friendly insulated terminal block.JRequires only a screwdriver and a wire stripper to terminate HDMI cables, slide in your stranded or solid-core wire, and re-tighten..
  • ✪ Little tips：Due to the different manufacturers,so the most HDMI have varying wiring plans.The actual wiring could be different depending on your equipment.（You can use the multimeter test to connect this HDMI solderless soldering head）If only one end needs to be changed, please apply the same wiring structure that was in use..
Check Stock

Ruiwaer 60pcs Nylon Insulated Flag Spade Quick Disconnects 90 Degree Electrical Crimp Terminals (20 x Red + 20 x Blue + 20 x Yellow)

  • Red, blue and yellow nylon fully insulated flag connectors (20pcs of each type, 60pcs in total)..
  • Blue: 16-14AWG, 15A, 1.5-2.5mm2, Yellow: 12-10AWG, 24A, 4-6mm2..
  • Material: insulating sleeve nylon tube material + brass end.
  • anti-aging, high temperature resistance, firm and safer wiring..
  • How to use: Remove the protective layer of the part of the wire that needs to be connected, insert the round head of the terminal to press it, and then insert the flat head into other positions that need to be connected, either soft or hard wire..
  • The high-quality flat wire crimping terminal can be disconnected conveniently, quickly and safely to prevent wiring failures. It is an ideal choice for automobiles, monitoring systems, elevators, industrial electronics, etc..
Check Stock

Dinkle DSS2.5N-02P DIN Rail Terminal Block Press-Fit Jumper (Pack of 50)

  • Heavy Duty Safe UL 6 Gauge Battery Cable for Car Battery: Tinned copper wire has good electrical conductivity, thermal conductivity, stability, tin-plated copper can increase heat dissipation, improve electrical conductivity and improve wire performance. Red wire is positive while black is negative..
  • Battery Cables with Tin-plated Copper Terminal: Jumper cables kit for car with tin-plated copper has good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better..
  • PVC Insulated Jacket: Automotive replacement battery cables flexible PVC insulation of battery cables resists abrasion, waterproof and moisture proof, flame retardant and heat insulation, and withstands the rigors of an automotive or marine environment..
  • 2 BATTERY CABLES: This 6awg battery cable kit contain one 20inches positive (Red) and one 20inches negative (Black) power inverter cables. 3/8” ring terminal at each end. The Maximum operating current is 60A.
  • WIDE APPLICATION: The 6 gauge positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, golf cart, lawn/garden equipment or power inverter batteries.
Check Stock

10 Pieces Pocket Screwdriver Set Double Ended Single Ended Pocket Clip Screwdriver Mini Pocket Screwdriver Tool for Home Office Car Gadgets Repair (Double Ended Style,6.3 Inch)

  • Insulated Screwdriver Flip-Blade has a #2 Phillips end and a 1/4-Inch Slotted end.
  • Securely and easily release the blade with a quick twist of the lock collar.
  • Interchangeable blades with a slim-tip to fit tight terminal blocks.
  • Handle and blade have a 1000-Volt insulation rating.
  • A layer of orange impact and flame resistant insulation protects from electric shock.
  • Meets or exceeds ASTM F1505 standards for insulation.
  • Cushion-Grip handles for greater torque and comfort.
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock