Categories

Best Insulated Wires And

uxcell 10 x Wire Crimp Connector Terminals Insulated Ferrule Blue E25-16 4AWG

  • ✅[No more stranded wires]no problem with frayed wires on the end inserting into speaker terminals or circuit boards..
  • ✅[GOOD CONDUCTIVITY] Insulated Ferrule Made of high quality copper material with tinned surface for oxidation resistance, corrosion resistance and high conductivity to maximize current. Insulated flare makes the wire easy to insert, eliminates loose wires and prevents wire ends from fraying or breaking. Safe to use and reliable connection..
  • ✅[Widely used]Perfect for car amplifiers, battery terminals, various home appliances and DIY audio. Works great in clearing engine compartment and amplifier connections. Perfectly matched with amplifiers that use direct wired inputs..
  • ✅[Flame-retardant material] The end protection connector-sleeve connector kit is designed as an insulated flare made of PVC material. It is not only flame retardant, but also prevents wire ends from fraying or breaking, thus reducing the risk of safety hazards..
  • ✅[100% Money Back Guarantee]:If you encounter any problems during the installation process, please contact us and we will try our best to help you solve the problem. If you are not satisfied with our products, we offer a 360-day money back guarantee..
Check Stock

C K Tools 495001 Automatic Wire Stripper Range 24 to 10 AWG

  • Strips wire in a fraction of the time of traditional tools.
  • Automatically adjusts to give damage free stripping of flat and round wires.
  • Features hardened steel blades for a longer life.
  • Wire strippers are also equipped with a micro adjustment knob for stripping wires smaller than 0.2mm.
  • Also features a strip depth stop and crimping jaws for insulated/non-insulated terminals and wire cutting jaws.
Check Stock

3M(TM) Scotchlok(TM) Butt Connector, Heat Shrink Seamless MH14BCK, 16-14 AWG

  • Fits firmly over wires thanks to the pre-insulated, heat shrink tubing so it remains secure over time.
  • Pre-insulated polyolefin protects wires from salt and water when this connector is shrunk and crimped.
  • The built-in wire stop helps you position it correctly every time.
  • This butt connector is for wire sizes 16 to 14 AWG.
  • The electrolytic copper contributes to outstanding conductivity while the tin plating is corrosion-resistant.
Check Stock

3 WIRE 20' RETRACTABLE TEST LEADS 18 GAUGE Aligator Clips In Reel

  • 3 Wire 20 ft Retractable Testing Leads 18 Gauge with Aligator Clips.
  • Color-coded Test Wires and Clips, 18 AWG Copper Conductivity Insulated Wires with 2" Alligator Clips.
  • Aligator Clips Retract into Sheaths, Jaws open up to 1/2" wide.
  • Test Leads Easy Unwind and Rewind, Stores Compactly and Neatly, no Messy Loose Wires.
  • Perfect for Testing Electrical Components and Circuits.
Check Stock

Jonard Tools WSC-826 Adjustable Wire Stripper & Crimper, 8 - 26 Awg

  • ...tion, made of steel by special hardened and using life-time.
  • ✅ 【Cable Crimping/Cutting】For stripping wire from AWG10-24, Alloy steel jaws cut for copper and aluminum cables from 10AWG to 24AWG, The cutter is made by special heat treatment and precision coating high-quality blade performs efficient cutting, For insulated terminals 22-10AWG, For non-insulated terminals 12-10AWG, 16-14AWG, 22-18AWG.
  • ✅ 【Self-Adjusting Stripping Pliers】 ( COPPER ADJUSTMENT BUTTON: the copper swivel knob micro-adjusts jaw tension and clearance for perfect stripping on smaller gauge wires beyond 20 AWG, A swivel knob can be adjusted with smaller wires when more tension is required) For auto ignition terminals 7-8mm, For striping the plastic or rubber insulation of the single, multiple cables and wires of 0.5-6mm, For cutting and stripping wire and cable.
  • ✅【Non-Slip Comfort Grip】Touch grips provide maximum comfort and reduced hand fatigue, Plastic & cushion grip handle, provides maximum leverage (PP& TPR) and increased comfort making the grip Self Adjusting.
  • ✅【Product Guarantee】30 days guaranteed, 12 months manufacture warranty and 24 hours WGGE customer service, We are dedicated to providing 100% customer satisfaction.
Check Stock

Neiko 01924A 3-in-1 Automatic Wire Stripper, Cutter and Crimping Tool, Self-Adjusting

  • Innovative wire stripper with self-adjusting mechanism is ideal for copper and aluminum cables from 10-24 AWG.
  • Specially designed and precisely machined teeth grabs, holds, pulls and removes outer jacket in a simple one-handed motion..
  • Thumb wheel micro-adjusts jaw tension and clearance for perfect stripping on smaller gauge wires beyond 20 AWG.
  • Adjustable gauge/stopper controls the length of core wire from 1/4 to 3/4”.
  • High-frequency heat treated blades makes clean cuts on wires from 10-24 AWG.
  • Built-in crimper crimps 10-22 AWG insulated, 4-22 AWG non-insulated and 7-8 mm auto ignited terminals.
  • 8 Inch spring-loaded, flat-sided handle provides maximum comfort and leverage.
Check Stock

Hotop 150 Pieces Solder Seal Wire Connector Heat Shrink Butt Waterproof Insulated Electrical Splice Terminals Automotive Marine for Boat Trailer (Red,22-18 AWG)

  • What will get: the package comes with 150 pieces of 22-18 AWG red heat shrink butt connectors with heat shrinkable, waterproof and conductive properties, which are sufficient to meet your various needs.
  • Insulated and waterproof: the electrical wire terminal comes with outer polyolefin tube and inner hot-melt ring, which can effectively improve waterproof performance, so it is very suitable for the automotive and marine industries.
  • Easy to use: you can just put 2 stripped wires into the solder sleeve and heat it with a hot air gun, and the insulating tube will shrink with a shrinkage ratio of 2:1 to form a waterproof seal, so as to complete the connection.
  • Practical design: these solder seal wire connectors are different from ordinary heat-shrinkable tubes, designed with solder ring and do not need crimping.
  • The solder seal terminals are transparent and can be accurately inspected when the wires are stripped and inserted inside.
  • Scope of usage: the insulated butt splices are useful tools to provide protection for wires, which are often applied in automobile, ship, marine, motorcycle and vehicles, and also applied for scientific wiring projects.
Check Stock

Jonard JIC-22035 Yellow Nylon Insulating Probe Pick Spudger 7" Length

  • L-SHAPED HOOK: For guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks.
  • FLAT HEAD: Tapers to a flat, 3/16" wide and 1/16" thick flathead with two small notches for grasping wires and electrical contacts.
  • INSULATED HOOK: Can be used to probe electrical contacts without having to worry about accidental shorts or damage.
  • INSULATED BODY: Made from a resiliant ABS material for high durability and insulating properties.
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Electriduct 1/4

  • Size: Diameter: 3/8"| Length: 10 Feet | Color: Black. Our wire loom is split and easy to load wires. Once loaded, our cable sleeve will close on itself and perfect wire wrap.
  • Operating temp (degree F.):-103 to 257|Melt temp: 446. Our cable management sleeve is used for Hifi speaker hdmi automotive wires.
  • Our cord protector keeps cat from chewing cables. Our cable protector is insulated.
  • Our cable organizer keeps the cords organized with no more messy cables in your home and office.
Check Stock

Milwaukee 48-22-3078 7IN1 High-Leverage Combination Pliers

  • Crimper crimp insulated and non-insulated terminals..
  • Wire stripper strips 8 AWG to 18 AWG Solid and 10 AWG to 20 AWG stranded wire..
  • Wire cutter cuts up to four 12 AWG wires..
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

uxcell 150Pcs SV5.5-5 Insulated Fork Spade U-Type Wire Connector Electrical Crimp Terminal 12-10AWG Yellow

  • 【FEATURE】- When the insulated terminals are closely spaced from each other, it can improve the safety of insulation, prevent the bifurcation of the wires, and make it easier to insert the wires into the plug..
  • 【ADVANTAGE 1】- The Copper Crimp Connector's shell is made of PVC, with insulation and flame retardant, high safety and good protection performance.
  • 【ADVANTAGE 2】- Electrical Crimp Connector's Pin made of metal, tight contact and good conductivity.
  • 【APPLICATION】-Insulated fork terminals widely applied in electric and electronic industry, electric equipment, Industrial automation, street lighting and power control system in traffic and transportation, posts and telecommunication, petrol chemical industry, industrial building machine-building, etc..
Check Stock