Categories

Best Insulating Board

GOONSDS 6 PCS Bakelite Board Laminate Raw Materials for Silicone Rubber Mold and Electrical Machinery Parts,100x150x3mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GOONSDS Bakelite Phenolic Board Sheet 10 Pieces Laminate Raw Materials for Silicone Rubber Mold, Length 100mm, Width 100mm,Thickness 4mm

  • ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

Conductive Pen, Drawn Circuit Conductive Ink Pen, Highly Fluid Excellent Electrical condu Metallic Nickel Powder for Home Hotel Repair DIY Craft e-Cards

  • 【MATERIAL COMPOSITION】The main conductive component of the conductive paint is metallic nickel powder. The coating is dark gray, and also contains appropriate amount of oily diluent, coating resin and conductive agent, and has excellent electrical conductivity..
  • 【WIDE RANGE OF APPLICATIONS】Can be used for circuit board repair, circuit graffiti, e-cards, etc..
  • 【COVER THE USE OF INSULATING MATERIALS】Some insulating materials can be covered on the drawn circuit, thereby drawing a multilayer circuit..
  • 【PAINT CHARACTERISTICS】The paint is highly fluid and can be electrically conductive after being painted and naturally dried..
  • 【GOOD ADHESION】Conductive ink adheres well to commonly used materials and is not easily washed away with water..
Check Stock

Touch-N-Seal FK-200 Kits Two Component Spray Foam Kit (Gun & Hose Included)

  • Yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet.
  • Portable, disposable, self-contained units, Fast set-up, Upright assembly.
  • No CFCs or urea formaldehyde, R-Value (ASTM C-518): 7.12 per inch.
  • High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications.
  • Kit includes: A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual illustrated instructions.
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Sentraq Screw-in Stabilizers for Cherry MX PCB-Mount Keyboards (Set)

  • Much more secure attachment to your board compared to traditional clip-in stabilizers.
  • Enough stabilizers to cover nearly any keyboard.
Check Stock

Two-Component Polyurethane Foam Kit 200 Board Feet

  • Theoretically yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet.
  • Portable, disposable, self-contained units, Fast set-up, Clear, color-coded hoses.
  • High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications.
  • No CFCs or urea formaldehyde, R-Value (ASTM C-518): 5.48 per inch, Density (ASTM D-1622): 1.75 +/- 0.2 pcf, K-Factor (ASTM C-518): 0.14 BTU/in/hr^-1/ft^-1/F^-1, Tensile Strength (ASTM D-1623): 30 psi, Closed Cell Content (ASTM D-2856): 90% minimum.
  • Up to 18 Month Shelf Life, Use All Contents Within 30 Days of Initial Dispensing. Kit includes: A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual illustrated instructions (English, Spanish, French).
Check Stock

High Temp Tape,AIYUNNI(2 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:50mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

High Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

6 Pieces Insulating Fire Brick for Kilns,Ovens,Forges,Metal Clay Firing,Fire Pit Accessories for Heater, Fireplaces,Jewelry Soldering,Size:9'X4.5'X2.5'

  • Good Quality and Low Price: You can get 6 pcs high-performance high-quality HTINXED insulating fire bricks at a lower price. These Insulating fire bricks are made of refractory clay, alumina and silica mixed materials. They have a porous structure. The insulation value is 2462°F/1350°C. It has strong insulation performance, high temperature resistance, low heat storage, and can achieve rapid heating, shorten the heating time, save energy and cost..
  • Easy to Install: HTINXED Insulating fire bricks have low density, light weight, and can be easily moved and cut. The dimensions of each insulating fire bricks are: 9" x 4.5" x 2.5" and the weight is 1.7KG. You can cut into various sizes to match your equipment accurately, allowing you to obtain a closer fire resistance effect..
  • Wide Range of Uses: HTINXED Insulating fire bricks are suitable for various household and industrial uses, such as oven, pizza oven, wooden fire oven, wall stove insulation, outdoor oven, outdoor kitchen, outdoor barbeque, kiln repair, jewelry welding, clay pottery firing, various electric furnace linings, and glass melting, metal smelting, refining vessels, heaters etc..
  • Double protection: Tightly packed and not easily broken. Our packaging box for Insulating fire bricks is customiz....
Check Stock

Seal Spray High Performance Closed Cell Insulating Foam Can (50 Board FT-2 Cans) - Must use Seal Spray Foam Gun (NOT Included)

  • Two component foam performance in one easy-to-use can with included Fan Spray tip. Each can is 27.4oz and covers approximately 25 Board Feet (1 Board Feet = 12" X 12" x 1" Thick). Extremely high yield per weight unit (OZ).
  • A quick and easy way to seal the gaps in your home and save on energy costs. Applied directly by simply attaching a spray nozzle to the can.. Superior Insulation and Sealing of wall boards, HVAC ducts, electrical conduits, pipes and other penetration..
  • Ideal for insulating walls, attics, and roofs. Excellent at filling of gaps and cavities. Thermal and sound insulation with superior R value (4.37 h·ft²·F/Btu (0,033 W/(m·K)), Density up to 1,25 lb/ft3 (20 kg/m3).
  • Costs much less than the competitor large format two-component kits for the same amount of coverage in board feet.. Compact small form factor size wastes less material on smaller projects, no large tank disposal, and you can easily take it anywhere..
  • Multiple users can spray at the same time versus only one with larger format two-component tanks. Get the exact yield you need do not over or under purchase ever again. MUST use Seal Spray Foam Gun (NOT INCLUDED)!.
Check Stock

12S-16S 13S 14S 15S 5A Capacitor Active Equalizer Balancer LFP Lifepo4 Lithium Lipo/Titanate LTO Battery Energy Transfer Active Equalization Module Faster Whole Group Balance

  • ...ge, the equalizer will automatically stop entering the sleep state when the B1 voltage NCM/LFP.
  • 【NOTE】: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 15S, the last line B16+ is empty.
  • use for 14s, B16+ and B15+ vacant no wiring..
Check Stock