Categories

Best Insulating Plate

ReplacementScrews Rear License Plate Screws Compatible with Tesla Model 3 (M3) - Stainless Steel - Black Oxide (Pack of 4)

  • ALL APPLICABLE: This license plate bolts set of fasteners includes 8 black license plate screws is Applies to US vehicles..
  • EASY INSTALLATION: This set is easy to use and can be easily installed with an ordinary screwdriver, no special tools are required..
  • RUSTPROOF: Our screws are made of high-quality non-rusting materials and covered with black insulating material, which can effectively prevent rusting and not damage the car..
  • FOAM BACK PAD: The foam back pad in the combination solves the problem of license plate noise..
  • PACKAGE CONTENTS: Black License Plate Screws 8PCS, Screw Washers 8PCS, Nylon Screw Inserts 8PCS, Screw Covers 8PCS, Foam Pad 8PCS.Can meet the coverage of the front and rear license plates of the car..
Check Stock

American Security Products U.L Listed 1 Hr Fire Combo Safe (OD 19 1/8x13 1/2x15 11/16, 126-Pounds)

  • 3-way boltwork with 5 active 1-1/4" diameter chrome-plated steel locking bolts. 4 pre-cut anchor holes with mounting hardware.
  • Massive 1-1/8" recessed door contructed of a 1/4" solid steel plate and a fire insulating material. 3-wheel combination lock protected by a drill-resistant hard plate..
  • All-velour interior including back-cover and firewalls. Deep blue textured finish with bold, elegant American Security logo.
Check Stock

Light Metal Plates Magnesium Alloy Machinery Parts Panel Magnesium Foil Sheet AZ31B 0.197\ Thin 5mm Magnesium Rudder Pedal

  • Made of 6061 aluminum offering good-grade contact surface.
  • 6x7 Inch - The size of the plate well suited to collect the products..
  • FABRIC BAG COVERED - The chilling pad includes a fabric bag for conveniently placing in Freezer or Refrigerator.
  • INSULATING WOODEN FEETS - The plate includes 4 wooden legs for keeping cool.
  • COLLECTION TOOL - It works well when collecting drips directly.
Check Stock

8 Sets License Plate Screw Kit, Stainless Anti Theft License Plate Screws, Anti-Rattle & Rust-Proof License Plate Bolts for Securing License Plates Frames or Covers on Cars, Trucks, SUVs (Black)

  • ALL APPLICABLE: This license plate bolts set of fasteners includes 8 black license plate screws. Fits for Most Domestic Cars and Trucks, EXCEPT Toyota/Honda/Audi/BMW/Tesla..
  • EASY INSTALLATION: This licence plate screw set is easy to use and can be easily installed with an ordinary screwdriver, no special tools are required. We Provide Friendly Customer Service, Please Contact Us If There Is Any Problem..
  • RUSTPROOF: Our license plate screws are made of high-quality non-rusting materials and covered with black insulating material, which can effectively prevent rusting and not damage the car..
  • FOAM BACK PAD: The foam back pad in the combination solves the problem of license plate noise..
  • PACKAGE CONTENTS: Black License Plate Screws 8PCS, Screw Washers 8PCS, Nylon Screw Inserts (OPTIONAL) 8PCS, Screw Covers 8PCS, Foam Pad 8PCS.Can meet the coverage of the front and rear license plates of the car..
Check Stock

Aootf Stainless Steel License Plate Screws - Anti Theft License Plate Frame Bolts Tamper Resistant Fasteners | 1/4\(M6) Security Machine Screws | Qty 8 | for Protection License Plates on Cars Trucks

  • ...thief dead in their tracks because they don't have the tools to steal your plate - Denied!.
  • Value-Money License Plate Screw Kit: 38 PC Practical End Edition Screw Set- Pack of 8 high security screws allows you to enough screws to secure 2-4 license plates.
  • These car exterior Accessories include 8 PC large size sound insulating foam pads, Our Exclusive shockproof foam pads are supposed to put between license plates and bumpers in order that you won’t hear any noise from scratching between license plate frames and bumpers.
  • No Worries After Sale: All products have 100% customer satisfaction lifetime warranty. If there is any defects or failure of this frame holder screws to meet expectations, we will back with a 100% replace or refund guarantee. If the anti-theft license plate screws are not suitable for the installation of your car, trailer, truck and other vehicle license plates, please contact us and send you the correct size license plate screws for free.
Check Stock

Dahszhi Wirewound Resistor 3 Ohm 100W Aluminum Case Chassis Mounted Resistor - 2pcs

  • Package Content: 2 x Aluminum Case Resistor.
  • Standard and non-inductive winding types.
  • Suitable for cooling plate installation..
  • High insulating capacity, good performance in vibration. Multiple connection modes, easy to install..
  • Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry..
Check Stock

Milling Cutter Bit Rotating Bit 6 Pieces Of 3-blade 90 Degree HSS Titanium Chamfering End Mill Cutter Counter Hole Deburring Cone Drill Set 6.3-20.5m Color HSS No Box

  • Material: It has the advantages of high hardness, wear resistance, good toughness and corrosion resistance. It also has stronger heat resistance, so it can maintain hardness even at high temperatures..
  • -The processed debris can be dropped more easily in the chamfering process, without affecting the work efficiency due to tool blockage..
  • -Suitable for workpieces with hardness lower than 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc. Titanium-coated models have higher hardness and longer service life.
  • -The blade can be ground: a more convenient maintenance method allows the tool to be ground without unloading..
  • -The automatic through hole chamfering knife can quickly chamfer both sides of the hole in a few seconds..
Check Stock

30 Pack Wall Plate Insulation Gasket,Outlet Insulation Switch Plate Insulation Replacement Gasket Replacement Made with Weatherproof One Gang Double Gang Triple Gang Switches,2.5 x 4.2 Inch (White)

  • Abundant Quantity: You will receive a total of 30 power socket spacers, abundant enough for your home's daily use and spares. The size of each insulating spacer is 107*64mm (4.2*2.5inch), the size is general size, you can also freely cut it according to your own needs..
  • 3IN1 Size: Wall Plate Insulation Gasket adopts a 3-in-1 design of one switch, two switches, and three switches. You can freely combine and cut according to the needs of your home switch, saving time and effort, saving time and cost..
  • Insulation Material: The wall panel insulation gasket is made of EVA foam material, which is safe in material, light in weight, small in size, has specific windproof and insulation effects, can fit your home switch very well, has good sealing and can be well protected You and your family can use electricity safely and prevent accidents effectively..
  • Easy to Use: The insulation gasket of the wall outlet is designed in the right size, which is very convenient to use. You only need to confirm the type of switch, select the appropriate gasket and cut it out, stick the gasket firmly on your switch, and then tighten the switch cover. That's it. It is very simple and safe to use..
  • Widely Applicable: The package contains 30 pieces of wallboard insulating spacers, wit....
Check Stock

Dahszhi Dahszhi 100W 2 Ohm Aluminum Power Metal Shell Case Wirewound Resistor 2pcs

  • Package Content: 2pcs x Aluminum Case Resistors.
  • Standard and non-inductive winding types.
  • Suitable for cooling plate installation..
  • High insulating capacity, good performance in vibration. Multiple connection modes, easy to install..
  • The hosing is made of aluminum alloy for heat dissipation. The surface with heat radiating groove..
  • Suitable for inverter,LED lights,speakers,frequency divider,servo industry,Speaker equipment and other industrial control..
Check Stock

Stainless Steel Perforated Metal Colander Strainer with Long Red Handle Sieve Sifters Use for Kitchen Food Pasta Noodles Spaghetti Vegetables Silver - 7.9inch

  • STURDY HANDLE AND STRONG RIVETS: Solidly constructed from high quality stainless steel..
  • NON-SLIP HEAT-INSULATING: The handle has a red silicone sleeve that is non-slip and heat-insulating, so that you can avoid slipping when there is oil stains, and burns when it is hot..
  • QUICK DRAINING - Micro-perforated colander with small closely spaced holes means your food won’t pass through the holes and it drains fast without having to tilt the bowl to get all of the water out..
  • EXTREMELY VERSATILE - You can literally use the metal colander for every food. Get rid from the frill water and oils of your pasta in a few seconds or clean your potatoes, tomatoes, berries and every other vegetable and fruit effortlessly. In addition, you can use this kitchen accessory as a countertop container, plate or displayer and save space!.
  • EASY CLEAN - Cleaning is a breeze as it’s stainless steel and there’s nothing to snag, Just run it through the dishwasher or under running water to hand wash. A progressive colander will be a great gift for your foodie friends..
Check Stock

6 Pieces Insulating Fire Brick for Kilns,Ovens,Forges,Metal Clay Firing,Fire Pit Accessories for Heater, Fireplaces,Jewelry Soldering,Size:9'X4.5'X2.5'

  • Good Quality and Low Price: You can get 6 pcs high-performance high-quality HTINXED insulating fire bricks at a lower price. These Insulating fire bricks are made of refractory clay, alumina and silica mixed materials. They have a porous structure. The insulation value is 2462°F/1350°C. It has strong insulation performance, high temperature resistance, low heat storage, and can achieve rapid heating, shorten the heating time, save energy and cost..
  • Easy to Install: HTINXED Insulating fire bricks have low density, light weight, and can be easily moved and cut. The dimensions of each insulating fire bricks are: 9" x 4.5" x 2.5" and the weight is 1.7KG. You can cut into various sizes to match your equipment accurately, allowing you to obtain a closer fire resistance effect..
  • Wide Range of Uses: HTINXED Insulating fire bricks are suitable for various household and industrial uses, such as oven, pizza oven, wooden fire oven, wall stove insulation, outdoor oven, outdoor kitchen, outdoor barbeque, kiln repair, jewelry welding, clay pottery firing, various electric furnace linings, and glass melting, metal smelting, refining vessels, heaters etc..
  • Double protection: Tightly packed and not easily broken. Our packaging box for Insulating fire bricks is customiz....
Check Stock

RUNZI Heat Diffuser Stainless Steel Induction Adapter Plate Foldable Handle Coffee Milk Cookware Induction Hob Heat Cooking Diffuser for Electric Stove 9.45inch

  • This is new design induction heat diffuser plate, with a removable heat insulating handle. It could be used with gas or electric stove..
  • You can use all your pans on most induction stoves with our products. Foldable handle design make it more convenient. It will not only save your....
  • The stainless steel heat diffuser plate is mainly help to distribute the heat evenly, which in return improves the quality of your cooking and most....
  • The disc of the heat diffuser consists of three layers. The upper and the bottom layers are stainless steel, whereas the middle is aluminum for....
  • The induction hob heat diffuser is the perfect gadget which allows you to use all of your pans on any induction surface. Therefore, you don't have to....
Check Stock

Fashionclubs 4pcs Microwave Oven Repairing Part Mica Plates Sheets 13cm x 13cm

  • Microwave Oven Repairing Part Mica Plates Sheets.
  • Mica Plate is mica paper with silicone resin by gluing temperature and pressed. As a kind of heat resisting and insulating product. It is widely used....
  • Product Name : Microwave Oven Mica Plates.
  • Material : Mica, Paper Size : 13 x 13cm / 5.1" x 5.1"(L*W).
  • Notice:Easy to be cut into the size according to your own need, so it is suitable for most.
  • Package Content : 4 x Microwave Oven Mica Plates.
Check Stock