Best Insulating Press Board
GOONSDS 6 PCS Bakelite Board Laminate Raw Materials for Silicone Rubber Mold and Electrical Machinery Parts,100x150x3mm
- ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
- Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
- The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check StockGOONSDS Bakelite Phenolic Board Sheet 10 Pieces Laminate Raw Materials for Silicone Rubber Mold, Length 100mm, Width 100mm,Thickness 4mm
- ... phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
- Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
- The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check StockDashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board
- MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
- SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
- TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
- APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
- Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check StockConverse Men s One Star Suede Low Top Sneakers Red 8 M US
- 4 different modes:1.red(quick flash) ,2.red(slow flash) ,3.neon-rotation mode,4.light off..
- Power supply mode button battery (included), shoelaces are on for about 60 hours, when the battery is exhausted, you can replace the battery with a....
- Suitable for sneakers , casual shoes, sports shoes, running shoes, boots and skates etc..
- Easy to use.Press the white power button on the side for different light settings and also to turn off the power..
- Note: Before use, please remember to remove the insulating layer, because there is an insulating film between the two batteries. Be careful to tie the....
Check Stock47 Solid Color Elastic Flat Shoelaces for Sneakers Hiking Boots Running Shoes off-white
- 4 different modes:1.red(quick flash) ,2.red(slow flash) ,3.neon-rotation mode,4.light off..
- Power supply mode button battery (included), shoelaces are on for about 60 hours, when the battery is exhausted, you can replace the battery with a....
- Suitable for sneakers , casual shoes, sports shoes, running shoes, boots and skates etc..
- Easy to use.Press the white power button on the side for different light settings and also to turn off the power..
- Note: Before use, please remember to remove the insulating layer, because there is an insulating film between the two batteries. Be careful to tie the....
Check StockEDSRDRUS Thermal Adhesive Tape 0.4 Inches x 82 Feet High Performance Thermally Conductive Tape, High Durability, Apply for Heat Sink, LED Strips, Computer CPU, GPU,etc
- Widely Used: From the hardware to the printing industry, EDSRDRUS thermal conduction tape has many applications. It’s perfect for electronic appliances, digital products, mobile phones, radiators, high-power electronic components, circuit board heat dissipation, computer CPU, GPU, and more..
- Material: EDSRDRUS double-sided thermally conductive tape combines fiberglass and acrylic adhesive with conductive ceramic powder for high thermal conductivity and insulating properties. Coated with strong acrylic adhesive, it’s removable, repositionable, and leaves no residue. It’s easy to install, efficient, and perfect for electronic devices..
- High Stability: With high and stable thermal conductivity, EDSRDRUS thermal tape lasts longer than standard heat-dissipating double-sided tape. It operates at temperatures of 80-120℃ (176-248°F) for at least 60 months..
- Excellent Stickiness: Our exceptional adhesive bonds securely to a variety of surfaces. For optimal adhesion, the surface must be clean, dry, and flat..
- Precautions for Use: Before use, please clean the surface of dust. Then cut, apply, and press the tape down as needed. Manually remove the backing liner. To keep the adhesive layer secure, avoid leaving fingerprints on it..
Check StockGlarks 720Pcs 2.8mm 4.8mm 6.3mm Male and Female Wire Spade Connector and Insulating Sleeve Assortment Kit Copper Wire Crimp Terminal Block with Nylon Sleeve Set for Car Audio Speaker
- ✿ [Package Detail]: This set includes 2.8mm, 4.8mm, 6.3mm male and female wire spade connectors, each for 60pcs, 2.8mm, 1.8mm, 6.3mm insulating sleeves, each for 120pcs, 720pcs in total. They are sorted packed in a plastic box, and different sizes of products are placed separately to avoid confusion. A multiple sizes and multiple quantities set can meet your needs in different situations..
- ✿ [Material]: The crimping terminal is made of high-quality red copper, which has extremely strong electrical conductivity, it also has good oxidation resistance. The soft nylon sleeve has good insulation and waterproof performance, small and light..
- ✿ [Easy to Use]: First, put the crimping terminal of the appropriate size into the insulating sleeve.
- then, insert the stripped wire into the crimping end and press it firmly with crimping tools.
- finally, connect the male and female connectors. The crimping is simple and convenient, even a novice can easily operate..
- ✿ [Exquisite Workmanship]: Our products are all produced according to the standard, the wire spade connectors are bright and beautiful without burrs, and the insulating sleeve has excellent sealing performance. Connectors and insulating sleeves are tightly fitted to ensure safety and no leakage. You c....
Check StockConductive Pen, Drawn Circuit Conductive Ink Pen, Highly Fluid Excellent Electrical condu Metallic Nickel Powder for Home Hotel Repair DIY Craft e-Cards
- 【MATERIAL COMPOSITION】The main conductive component of the conductive paint is metallic nickel powder. The coating is dark gray, and also contains appropriate amount of oily diluent, coating resin and conductive agent, and has excellent electrical conductivity..
- 【WIDE RANGE OF APPLICATIONS】Can be used for circuit board repair, circuit graffiti, e-cards, etc..
- 【COVER THE USE OF INSULATING MATERIALS】Some insulating materials can be covered on the drawn circuit, thereby drawing a multilayer circuit..
- 【PAINT CHARACTERISTICS】The paint is highly fluid and can be electrically conductive after being painted and naturally dried..
- 【GOOD ADHESION】Conductive ink adheres well to commonly used materials and is not easily washed away with water..
Check StockDINUOSEN LED White Shoelaces Light Up Shoe laces 3 Modes 7 Colors flashing Shoestrings
- 4 different modes:1.red(quick flash) ,2.red(slow flash) ,3.neon-rotation mode,4.light off..
- Power supply mode button battery (included), shoelaces are on for about 60 hours, when the battery is exhausted, you can replace the battery with a new one. However, a special tool kit for unscrewing the battery box is required..
- Suitable for sneakers , casual shoes, sports shoes, running shoes, boots and skates etc..
- Easy to use.Press the white power button on the side for different light settings and also to turn off the power..
- Note: Before use, please remember to remove the insulating layer, because there is an insulating film between the two batteries. Be careful to tie the shoelaces with a little force, otherwise the LED wire inside will be torn, which will cause the light to not work!.
Check StockColorsheng 1 Pairs 47'' LED White Shoelaces Light Up Shoe laces 7 Colors Flashing 3 Modes Shoestrings
- 4 different modes:1.red(quick flash) ,2.red(slow flash) ,3.neon-rotation mode,4.light off..
- Power supply mode: button battery (included), shoelaces are on for about 60 hours, when the battery is exhausted, you can replace the battery with a new one. However, a special tool kit for unscrewing the battery box is required..
- Easy to use.Press the white power button on the side for different light settings and also to turn off the power..
- Suitable for sneakers, casual shoes, sports shoes, running shoes, boots and skates etc..
- Note: Before use, please remember to remove the insulating layer, because there is an insulating film between the two batteries. Be careful to tie the shoelaces with a little force, otherwise the LED wire inside will be torn, which will cause.
Check StockTouch-N-Seal FK-200 Kits Two Component Spray Foam Kit (Gun & Hose Included)
- Yields 200 board feet or 200 square feet using a 1" layer (1 board foot = 12" x 12" x 1"), 16.6 cubic feet.
- Portable, disposable, self-contained units, Fast set-up, Upright assembly.
- No CFCs or urea formaldehyde, R-Value (ASTM C-518): 7.12 per inch.
- High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications.
- Kit includes: A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual illustrated instructions.
Check StockZorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard
- 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
- 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
- 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
- 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
- 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check StockSentraq Screw-in Stabilizers for Cherry MX PCB-Mount Keyboards (Set)
- Much more secure attachment to your board compared to traditional clip-in stabilizers.
- Enough stabilizers to cover nearly any keyboard.
Check Stock