Categories

Best Insulation Meter

Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment.
  • Multiranging digital meter performs timed IR, PI, and DAR.
  • Memory includes time/date stamping of results and data logging.
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads.
  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water.
Check Stock

Megger 212159 Analog Hand-Crank Insulation Tester, 2,000 Megaohms Resistance, 100, 250, 500, 1000 V Test Voltage

  • Insulation tester for measuring insulation resistance and voltage.
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Analog meter with manual range selection for flexibility of use.
  • Guard terminal to eliminate surface current leakage.
  • Safety rated to European Standard EN61010-1 Category II, 300V and Category I, 600V.
Check Stock

IDEAL INDUSTRIES INC. 61-744 Clamp Meter 600 Amp AC with NCV, Voltage Indicator, CATIII for 600v

  • [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
  • [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
  • [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
  • [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
  • [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage

  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Dual digital display with analog arc function to replicate response of analog meters.
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms.
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water.
Check Stock

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

KAKOOTI Multimeter Test Leads Kit，2PCS Test Probes 1000V 20A 4PCS Silicone Alligator Clips Test, Multimeter Alligator Clips Set for Fluke/AstroAI/INNOVA/KAIWEETS Digital multimeter Clamp Meter

  • ...rs, volt meter，ohm meter, electrical meter，bench power supply，multi meter electric tester，megger test leads，amp meter，esr meter，multimeter tester.
  • ✅【Sturdy & Heavy Duty】This crocodile clip is rust-proof, corrosion-resistant, oxidation-resistant, compact and durable.Silicon rubber material, double insulation, Each crocodile clip overall jaw perfect solid bite, they are clamping tight, long-term use without deformation.
  • ✅【Conductivity] 】The test lead set has excellent tensile strength and bending strength, as well as low strength and excellent electrical conductivity. It is very useful for electricians and maintenance personnel of electronic products. Test lead set connects a compatible electrical test meter to a device for testing. Use a very wide range for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing.
  • ✅【Easy To Use】Plug and play, Easy for installation and safe for use.Please feel free to contact us if you have any concerns. We provide 36-Month after sale service.
Check Stock

KAIWEETS HT206A Clamp Meter Multimeter TRMS 4000 Counts, Auto-ranging Amp Voltage Tester with Backlight, Measures AC Current, AC/DC Voltage, Capacitance, Resistance, Diodes, Continuity

  • [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
  • [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
  • [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
  • [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
  • [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

BTMETER BT-6688B Megohmmeter 200 Gig Ohm Digital Insulation Resistance Tester, 500V/1kV/2.5kV/5kV Test Voltage, Auto Ranging, Backlight Display

  • ✅【High Insulation Resistance Tester】Digital Autoranging Megohmeter measures high insulation resistance 0.1M～200G ohms with accuracy 3%~10% + 5 digits..
  • ✅【Wider Testing Voltage】The output testing voltage can be selected from 100V/250V/500V/1000V/2500V/5000V. This Insulation Resistance Tester comes with a non-slip and anti-fall protective case which is insulative..
  • ✅【Safe and Reliable Mega Ohmmeter】 IEC-1010 double insulation, overvoltage category Ⅱ safety standard rated. During any rated voltage measurement, if the measured resistance is less than 5M ohms, the measurement time should not exceed 10 seconds..
  • ✅【Electric Insulativity Test Checker】 This Megohm meter can also measures AC high volt 1V~750V, Frequency Range:40Hz~400Hz,with high voltage measurement LED warning.Ideal for measuring insulation resistance in high-voltage electrical equipment, electricity wiring cable.
  • ✅【2 YEARS QUALITY WARRANTY】BT-6688B 1999 Counts Megameter suitable for measuring the insulation resistance of various electrical equipment and insulating materials such as transformers, motors, cables, switches, electrical appliances, etc. Backed for 1 year warranty for worry-free purchase!.
Check Stock

1587KIT/62MAX+ FC 2-in-1 Adv Elec Tr Ins Mult Kit W/62Max+ I400

  • Fluke 1587FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks.
  • Fluke i400 Clamp meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
  • Fluke 62 MAX+ Infrared Thermometer -30°C to 650°C (-22°F to 1202°F).
Check Stock

Klein Tools CL900 Digital Clamp Meter Autoranging TRMS AC/DC Voltage/Current 2000A LoZ Continuity Frequency NCVT Temp More 1000V

  • Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60 Milliohm.
  • Rugged Klein "TOUGH METER" industrial design stands up to jobsite demands.
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
  • CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating.
  • Backlit display for clear visibility in environments with low ambient lighting.
Check Stock

Megger MIT420/2 (1006-740) Insulation/Continuity Tester w/Storage, PI, DAR 50V/100V/250V/500V/1000V

  • LCD Back-light Offers Clear Reading at Dark: This Insulation Tester is equipped with large LCD screen with bright green backlight for easy reading even in dark environment.
  • Insulation Resistance Meter: Making two parallel electrodes on the back of the instrument close to the measured object surface, you can judge whether the abject is a conductor, static material or insulator.
  • Multiple Functions Provides Convenient and High Efficiency : This Insulation Resistance Tester is featured with multiple functions to offer high efficiency , such as ℃/℉ unit conversion, data hold, MIN value, auto power off, battery indication.
  • Offers Comfortable Griping: Ergonomically designed instrument body, convenient to hold and operate.
  • Soft Buttons Provides Comfortable Feeling: Soft buttons design, comfortable hand feeling.
Check Stock

OhhGo Three-Phase Multifunctional Digital Energy Meter Voltage Current Display Programmable Electric Power Meter

  • [Smart Meter] - Three-phase voltage, current digital smart meter, with RS485 communication interface, various parameter detection, comprehensive monitoring..
  • [Detection Function] - Switch input/output, can detect current, voltage, electric energy, power, and power factor..
  • [Convenient Use] - Digital display and four buttons design, enables the instrument to achieve convenient and flexible use..
  • [ABS Flame Retardant Material] - ABS flame retardant shell, good insulation and durable in use. Also features stable performance and high accuracy..
  • [Suitable For]- It is suitable for complete monitoring and management of electrical parameters in various incoming circuits and large- capacity distribution and outgoing circuits..
Check Stock

Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

  • ...ll help you solve electrical problems in the car or at home quickly and safely.
  • ▲Contactless Voltage Detection : When AC voltage is detected, a visible LED lights up and emits a beep.
  • The multimeter's flashlight will only glow when the current is being tested.
  • ▲Overload Protection : Overload protection and double insulation protection prevent electric shocks and protect users from hazardous areas.
  • ▲Versatile and Easy to Read : a large, high-resolution LCD with large backlighting ensures better visibility in dark work areas.
  • ▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
  • ▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
  • ▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
  • ▲Fixed with Free Additional Test Lead : free battery and test lead, everything packed in a case, direct use.
  • The design is ergonomic and portable, ideal for professionals or new users.
  • ▲Package Content : 1 x Digital Clamp Meter, 2 x Test Leads, 3 x 1.5V AAA Batteries, 1 x....
Check Stock