Categories

Best Intake Manifold For Chevy 350

TYFYB High Rise Vortec Single Plane Intake Manifold Aluminum For SBC Intake Manifold 350 Single Plane Modified 3000-7500 RPM Range

  • High Rise Intake Manifold；Satin Finish；Single Plane；Height: 6.060 in；RPM Range: 3,000-7,500+；Intake Material: Aluminum；Single plane design intended for serious street and race applications.
  • For sale is a new high rise single plane intake for small block Chevy，Big power for mid to upper RPM ranges，Ideal for high performance and race applications.
  • These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses..
  • 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

1 PC SHLPDFM Single Plane Intake Manifold Cast Satin Finish Aluminum Intake Manifold Compatible with 1957-1995 SBC Small Block Chevy 350 400 RPM 3500-8000

  • ★Compatible with 1957-95 Small Block Chevy 350 400 Manifold..
  • ★Single plane design intended for serious street and race applications.
  • ★Made of high quality Cast Aluminum material,maximum durability,Deformation resistance, high strength, good wear resistance, high hardness, long life..
Check Stock

A-Premium Dual Plane Air Gap Intake Manifold Compatible with Chevy Small Block, fits V8 4.3L 262 265, 4.4L 267, 4.6L 283, 4.9L 302, 5.0L 305 307, 5.4L 327, 5.7L 350, 6.6L 400, Replace# 52026, 82026

  • ③ Carburetor Mounting: 4-barrel square bore.
  • ④ Cylinder Head Style: Stock configuration.
  • [Benefits]: It is made of superior-quality materials with top-quality performance and reliable construction, the smooth inner wall of the manifold makes it super air-intake capacity, riving more smoothly and safely..
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this dual plane intake manifold is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile. › See more product details.
Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

  • Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
  • Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
  • Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
  • Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
  • Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock

Carburetor Carb Intake Manifold Boot Adapter for Yamaha Wolverine 350 YFM350 (1996-2005) & Big Bear 350 YFM350 (1999) 4x4 ATV Quad 4KB-14901-10-00, 4KB-14901-22-00, 4KB-13586-01-00

  • [FITMENT]-- New intake manifold for 1996-2005 Yamaha Wolverine 350 YFM350 carburetor..
  • [FITMENT]-- Carb intake manifold boot fit for 1999 Yamaha Big Bear 350 YFM350 4x4 ATV.
  • [FITMENT]-- Fit for models: 4KB-14901-10-00, 4KB-14901-22-00, 4KB-13586-01-00..
  • [NOTICE]-- Installation side diameter: 39mm/ 1.53”.
  • Please check model and year to confirm suitability before purchase..
  • [WARRANTY]✉: 90 days. Please contact us for any product problem or purchasing guidance..
Check Stock

Carb Joint Intake Manifold Boots For Honda SL350 CL350 CB350 1968-1973

  • Compatible Models: HONDA CB350 1968-1973 CL350 1968-1973 SL350 1970..
  • High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • OEM and Package: Carburetor insulator OEM part number is 16211-286-040.
  •  If you buy them you will get the 2 x Carburetor Intake Manifold Boot  for Honda Motorcycle SL350.
  • Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice..
  • After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products..
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

YFM350 Carburetor+Intake Manifold for ATV Yamaha Warrior 350 1987-2004/1987-1998 Big Bear 350 YFM350/1987-1990 & 1992-1995 Moto-4 350 YFM350

  • Carburetor Carb for Yamaha Warrior 350 YFM350 YFM350X 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004.
  • Carburetor fits Yamaha Big Bear 350 (1987-1998).
  • Carburetor for Yamaha Warrior 350 YFM350 1987-2004.
  • 1987-1990 & 1992-1995 Yamaha Moto-4 350 YFM350.
  • 1987-1996 Yamaha BIG BEAR 350 YFM350 4WD.
  • Inner Diameter (intake side): 36mm，Inner Diameter (air filter side): 46mm/ Outer Diameter(air filter side): 50mm..
  • Package list: 1x YFM350 Carburetor(1987-2004),1x Intake Manifold,1x Screw package.
Check Stock

1957-1986 SBC Small Block Chevy Aluminum Performer Dual Plane RPM Intake manifold 350 400

  • Engine Make/Size:Chevy Small Block (265-400).
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

New YFM350 Carburetor+Intake Manifold For Yamaha Warrior 350 YFM350 X 1987-2004 ATV Quad Carb Hand Choke

  • ...of mixture according to the different working conditions of the engine Give your machine the new power and torque it deserves..
  • YFM350 Carburetor Inner diameter (intake side): 36mm, inner diameter (air filter side): 46mm / outer diameter (air filter side): 50mm, You will get:1x YFM350 Carburetor(1987-2004),1x Intake Manifold,1x Screw package..
Check Stock

MOSTPLUS 2721402401 2721402201 Intake Manifold Compatible for Mercedes C230 E350 SLK280 S400 GLK350 ML350

  • 【Fitment】— Compatible for Mercedes C230, C280, CLK350 06-09.
  • Compatible for Mercedes C250, ML450 (Only fit for 3.0L and 3.5L).
  • 【OEM Part Number】—2721402101, 2721402201, 2721402401, A2721402401.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Please check the year, make, model and trim of your vehicle in the garage before purchase.
Check Stock