Categories

Best Intake Manifold Gasket Inlet Port Size

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

NEW HOLLEY STREET DEMON CARBURETOR,BALL-BURNISHED SHINY ALUMINUM WITH BLACK COMPOSITE FUEL BOWL,625 CFM,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES

  • ...reen | Supercharged Application: No | Vacuum Ports: 1 timed (spark) port, 2 full & 1 PCV port.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

615-178 Upper Intake Manifold for 1996-2000 Fo-rd Crown Victoria Thunderbird Mus-tang Lin-coln Town Car Mercury Grand Marquis Cougar V8 4.6L F8AZ9424AAA F8AZ9424CA

  • The primary function of the intake manifold is to distribute the inlet air or air / fuel mixture to each of the cylinders evenly so that the engine can run properly and the vehicle can move..
  • The most common problem with the intake manifold is a blown gasket. Since gaskets are made of steel and rubber and are relatively thin, they can break very easily. Here are some Common Signs of a Bad Intake Manifold: 1. Engine Overheating.
  • 2. Loss in Engine Performance or Misfires.
  • Replacement OEM Part Numbers: 615-178 / F6SZ9424AA / F8AZ9424AAA / F8AZ9424BC / F8AZ9424CA.
  • Replacement for: Fo-rd: 1996-2000 Cro-wn Victoria, 1996-1998 Mus-tang, 1996-1997 Thunder-bird --- V8 4.6L, Mer-cury: 1996-2000 Grand Marquis, 1996-1997 Cougar.
  • Thank you for choosing our high quality parts. With the favorable price you can contact us anytime by e-mail. Please check the YEAR / MANUFACTURE / MODEL carefully under PRODUCT DESCRIPTION to make sure it fits..
Check Stock

Miaowa Racing Performance Intake Pipe Inlet Manifold For GX200 6.5HP OHV Engines/Predator 212cc 196cc Engines Mini Bike Go Kart

  • Fitment: Racing Performance Intake Pipe Inlet Manifold For GX200 6.5HP Chinese OHV Engines 196cc Clone Engines Mini Bike Go Kart.
  • It’s A CNC Machined Performance Manifold To Adapt To A Predator 212cc 196cc Clone Engines And 6.5HP OHV Engines.
  • Package Include: 1pc Mainfold + 1pc Gasket + 1set Mounting Screws.
  • Commitment::Please feel free to conact us if you have any question.We will reply ASAP!.
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the d....
Check Stock

Dokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986

  • 【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
  • 【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
  • 【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
  • 【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Car Intake Scoop Bonnet Vent Hood Air Vent Trim Decor Cover Fydun 2pcs Universal Carbon Fiber Style Air Flow Intake Side Scoop Hood Cover

  • 【Universal Air Intake Cover】 This bonnet hood is easy to install and is suitable for all cars..
  • 【Quality】The air inlet cover is made of automotive grade ABS plastic and is lightweight and extremely durable. The manufacturing process is....
  • 【Unique design】 The hood vents has excellent quality, and the unique and stylish design adds a stylish look to your car. The intake manifold makes....
  • 【Good performance】 The air inlet cover allows air to pass through the air intake in the engine area, keeping the hood cool and stable, while also....
  • 【Simple installation】The air inlet of the air inlet cover is equipped with tape. It is very convenient to install and will not damage your paint....
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

LIMICAR Cylinder Head Gasket Set Head Bolts ES72173 (1st Generation) Compatible w/ 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 Chevrolet Silverado Tahoe GMC Yukon Envoy Buick Cadillac 4.8L 5.3L

  • ...Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available..
  • ✅Package Inclued: Multi-layered Steel(MLS) Head Gaskets.
  • 30PCS Head Bolts(ES72173 1st Generation)..
  • ✅NOTICE: Please check the description and compatibility chart before your purchasing. Head Bolts Size 1: Quantity: 16, Length(mm): 155, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 2: Quantity: 4, Length(mm): 100, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 3: Quantity: 10, Length(mm): 45, Thread Pitch(mm): 1.25, Thread Size: M8..
Check Stock