Categories

Best Intake Manifold Gasket Repair Kit

Dorman 264-968 Engine Valve Cover Compatible with Select Buick/Cadillac/Chevrolet Models

  • Direct replacement - made from injection molded polymer for superior fit and heat resistance, this valve cover matches the original equipment part for fit and function.
  • Complete solution - this valve cover includes a new gasket and new bolts for a complete repair.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service.
  • Related repair - this valve cover often fails due to a faulty intake manifold.
  • also replace manifold if it is missing PCV valve.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

BACOENG 5 Gallon Vacuum Chamber Kit with Vacuum Pump Standard HVAC

  • 5 Gallon Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc..
  • Silicone gasket to be used over 10,000 times without deterioration..
  • Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM.
  •  Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml.
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock

ABLAZE 2 Quart Stainless Steel Vacuum Degassing Chamber and 3 CFM Single Stage Pump Kit

  • 2 Quart Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc..
  • Silicone gasket to be used over 10,000 times without deterioration..
  • Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM.
  • Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml.
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder

  • ★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
  • ★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
  • ★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
  • ★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
  • ★ ATTENTION- 100% product quality assurance. Please feel free t....
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ...V8, for 2010-2013 Gmc Sierra 5.3L V8, for 2007-2014 Gmc Yukon Xl 1500 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

Vincos HS26157PT CS26157 ES71129 Head Gasket Set w/Bolts kit Conversion Gasket Set Compatible with Ram 1500 2002 2003 Durango/Dokota 00 01 02 03 Grand Cherokee 99-03 4.7L V8

  • ...ion of your opinions and demands,to improve our products and service for you.Enjoy your shopping time..
  • 【Interchange Part Number】HS26157PT, CS26157, ES71129, FSGM30400N, HBGM30400【Compatible with】1500 PICKUP 4.7L【Include】Head Gasket Bolts kit:head gasket.
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock