Categories

Best Intake Pipe

Intake Pipe, Fydun Intake Repair Hose Air Intake Hose for Mercedes-Benz W172 SLK200 SLK250 W204 C180 C200 C250 W212 E200 E250 2710901929 A2710901629 A2711801819 Intake Piping

  • 【High Quality】 Intake Pipe Hose Kit Made of high-quality rubber material, it is resistant to high and low temperatures and is extremely durable, our product has impeccable durability performance, waterproof, dust-proof, anti-rust, , wear-resisting, anti-strike, anti-scratch and colorfast..
  • 【Manufacturer number】The replacing manufacturer part number/OE number for reference is : A2710901629, A2710901729, A2710902029, A2711801819, 2710901629, 2710901729, 2710902029, 2711801819.
  • 【Quality characteristics】Professional manufacturing, air intake hose has stable characteristics and performance.With exquisite workmanship, our product makes the exhaust work more smoothly, and improve the power function, ensuring you a comfortable and exciting riding experience..
  • 【Simple Installation】This intake Pipe Can Enhanced filter protection, improved throttle response and engine performance, flexible, scalable and easy to install，directly replace your broken one, convenient to use.
  • 【Long Life】The intake pipe repair was made of high quality material, wear-resistant and available for long service life..
Check Stock

Fluval 406/407 Bio Foam Value Pack, Replacement Aquarium Filter Media

  • ... dial from anywhere between 450 gallons per hour down to a gentle 90 gallons per hour..
  • SURFACE SKIMMER: The surface skimmer on the Tidal Power Filter will capture the water from just below the surface, where excreted fish oils accumulate, as well as deeper in the tank to remove floating debris..
  • ADJUSTABLE INTAKE FLOW: With Tidal’s dual intake, it pulls water in through the telescoping pipe below the surface and at the surface through the surface skimmer. Easily adjust how much flow comes from the underwater intake pipe versus the surface skimmer with the intake flow dial..
  • HEATER HOLDER: A heater can be attached to the side of the Tidal Power Filter with an optional heater clip, allowing for better dispersal of heated water throughout your tank or aquarium..
  • MAINTENANCE ALERT: When filtration media becomes clogged with detritus and affects the flow of water, the Tidal Power Filter redirects water around the filter and back into the aquarium through an outlet on the side. The redirected water then pushed up the blue maintenance alert on the top of the filter, signaling that the filter needs to be cleaned..
Check Stock

Imperial 4" Premium Intake Cap with Built-In Pest Guard Screen, White, PA-4W

  • Easy to install fresh air intake vent cap.
  • Not for use in clothes dryer applications.
  • Paintable plastic components contain UV stabilizer to reduce fading due to exposure to sunlight.
  • Fits a 4-inch pipe diameter/vent opening.
  • The outside dimensions of the cap cover plate is 6” x 6”.
Check Stock

Turbonator Dual Fan,64mm/2.5in Intake Turbo Fan Diameter Aluminum Alloy + Rubber Car Air Intake Turbonator Dual Fan Turbine Supercharger Gas Fuel Saver Turbo (Red)

  • FEATURES: Increase the intake air volume of the combustion chamber by the turbofan, improve the combustion efficiency of the combustion chamber gas and thus enhance the horsepower..
  • WORKING PRINCIPLE: ABS new material fan blade draws air into the combustion chamber at a higher rate, Improve the atomization degree of the combustion chamber, increased horsepower and gasoline savings..
  • MATERIAL: ABS new material fan blade+Aluminum alloy pipe. ABS material is corrosion resistant, heat resistant, high hardness and does not produce metal debris entering the combustion chamber. Aluminum alloy pipes are corrosion resistant, durable and lighter in weight..
  • INSTALLATION POSITION：The turbine is installed in the intake hose of the engine, and the best position is 10cm-30cm / 3.94 "- 11.8" before the throttle valve. Note: suitable for car models with inlet pipe diameter greater than 2.5 inches..
  • PACKAGE and SIZE : 1 x Intake Fan,3 x Rubber Loop,Intake turbine size: 7.5cm x 6.5cm/ 2.9inch x 2.5inch..
Check Stock

Smoke Leak Detector, 2 MODE Automotive Fuel leakage Diagnostic Tester,Conduit PIPE System Leakage Tester,EVAP Leak Detector For 12V Vehicles

  • ...p you find out the leaked part in pipe..
  • POWERFUL EVAP SUPPORT — EVAP special connector can help you use with EVAP System of all vehicles to quickly find out the leak parts and come with 1.5m / 59inch smoke outlet hose to assist connect perfectly. The main functions of SDT-205 also include Air Tightness Test & Air Intake System Test..
  • TECHNICAL PARAMETER — Built-in air pump, no need to connect an external air pump, can be tested & repaired at any time, saving time and energy. Voltage: DC 12V(Supplied by Automotive Battery).
  • Output pressure: 15psi & Output smoke value: 1-6L/min. With over-heat and over-load protection..
  • WIDE COMPATIBILITY — The pipe fuel leakage detector is designed for detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks & speedboats, such as fuel pipe, cooling tank, intake system, exhaust system & EVAP system..
  • 3 YEARS WARRANTY — To ensure your high-quality shopping experience, we promise 3 years warranty. If you have any issues with using SDT-205, please feel free to contact us that we will provide you 100% satisfaction after-sales services. Buy and use with confidence!.
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ，make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock

Cold Air Intake kit with Filter for 1999-2004 Ford Mustang 3.8L V6 Red

  • Fit for 1999 2000 2001 2002 2003 2004 Ford Mustang Base 3.8L V6 Engine(Please MATCH your vehicle on the left top before purchasing).
  • This cold air intake system designed to increasing 8-10% horsepower & 6-10% torque, improveed fuel economy and creating an attractive intake noise..
  • MOOSUN intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's....
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
  • Come with all you need in the picture, ready to be installed.
Check Stock

3 Inch Car Turbo Air Intake Hose, Universal Adjustable Flexible High Flow Turbo Cold Air Intake System Hose Pipe Tube

  • Durable in Use: This car turbo air intake hose made of high quality plastic material, has high hardness, no harmful coationg on its surface, safe and durable to use..
  • Flexible Design: This air intake pipe inlet hose can extendable to 100cm(39.4inch), 360 degree fully flexible..
  • Universal Application: This flexible cold air intake turbo hose universal fits for most vehicles with 76mm air intake hose..
  • Easy To Use : Easy installation without extra adjustment..
  • Low Noise : It has bigger horsepower and less noise..
Check Stock

Mishimoto MMAI-CIV-17SIBK Performance Air Intake Compatible With Honda Civic Si 2017-2021 Black

  • Direct fit for the 2017-2021 Honda Civic Si.
  • Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune with 37% less restrictive than stock intake system.
  • Smooth design eliminates restrictions and improves airflow.
  • Highly aggressive intake tone under acceleration.
  • Aluminum intake pipe includes CNC-machined MAF housing and comes with the Mishimoto Lifetime Warranty.
Check Stock

NIBBI High Performance Air Filter Intake Curve Pipe Air Filter Elbow Air Intake Pipe Air Intake Elbow For GY6 Engine

  • This is an air intake pipe specially manufactured by Nibbi..
  • It can be used to lengthen the air intake duct to fit the body of the motorcycle, and it can be used where there are not enough places or where....
  • It does not have any effect on the exhaust emissions of motorcycles, and it will not affect the power system and it does not participate in emissions..
  • Please contact us if you have any questions, Nibbi will always be your trusted partner.
Check Stock

Torchetree 3 Universal cold air intake System kit（Red）

  • [Easy to Install]-- Very easy to install in your car or truck, easy to install using simple tools, no other parts to install, can be completed in 112....
  • [Quality and Reliability]-- Components are of reliable quality and durable. The intake pipe is made of quality aluminum and polished, and the quality....
  • [Superior Performance]-- Replacing this intake kit can increase horsepower by 7-10% and torque by 6-30%, resulting in better throttle response and....
  • [FITMENT]-- Compatible with 3" Universal cold air intake System kit（Red）.
  • [NOTE]-- For details, please determine the fit in "confirmedfit", to confirm that the part is correct for your vehicle application.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

Joywayus 2Pcs Stainless Steel Internal Hex Countersunk Thread Socket Pipe Plug 1/2"NPT Male

  • Male National Pipe Taper (NPT) threads for use with female threaded pipes.
  • It is a Silver tone internal Hex Head Pipe Connector that is for closing and terminating the end of a pipe..
  • Great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block.
Check Stock