Zeiss Precision Ultralight 1913 Mil-Spec Rifle Scope Mounting Rings with Anti-Cant Bubble Level 30mm Low Matte Black
- REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
- Type 303 stainless steel top cap screws with black oxide finish.
- BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
- RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
- DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
- Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte....
Check StockZeiss Conquest V4 Rifle Scope, 4-16x50, 30mm Tube, ZMOAi-T30 Illum. Reticle, Ext 522945-9964-080
- REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
- Type 303 stainless steel top cap screws with black oxide finish.
- Micro-radiused on all machined leading edges to ensure a non-marring design.
- BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
- RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
- DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
- Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
- Hard Case and T15 and T25 Torx driver bits included.
Check StockZeiss Precision Ultralight 1913 Mil-Spec Rifle Scope Mounting Rings with Anti-Cant Bubble Level, 30mm, High
- REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
- Type 303 stainless steel top cap screws with black oxide finish.
- Micro-radiused on all machined leading edges to ensure a non-marring design.
- BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
- RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
- DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
- Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
- Hard Case and T15 and T25 Torx driver bits included.
Check StockZEISS Precision Ultralight 1913 Mil-Spec Rifle Scope Mounting Rings with Anti-Cant Bubble Level, 30mm, Medium, Black
- REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
- Type 303 stainless steel top cap screws with black oxide finish.
- Micro-radiused on all machined leading edges to ensure a non-marring design.
- BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
- RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
- DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
- Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
- Hard Case and T15 and T25 Torx driver bits included.
Check StockZeiss Precision Ultralight 1913 Mil-Spec Rifle Scope Mounting Rings with Anti-Cant Bubble Level, 34mm, Low, Matte Black
- REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
- Type 303 stainless steel top cap screws with black oxide finish.
- Micro-radiused on all machined leading edges to ensure a non-marring design.
- BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
- RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
- DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
- Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
- Hard Case and T15 and T25 Torx driver bits included.
Check StockNIKON F100 35mm SLR Camera Body
- Type of Camera - Integral motor autofocus 35mm SLR (Single Lens Reflex) camera with electronically controlled focal-plane shutter..
- Exposure Modes - Programmed Auto, Flexible Program, Shutter priority, Aperture Priority and Manual.
- Picture Format - 24mm x 36mm (standard 35mm film format).
- Viewfinder - Fixed eyelevel pentaprism, built-in diopter adjustment (-2 to +1m-1).
- Power Source: Battery Holder MS-41 provided (two 3V Lithium batteries) Optional Multi Power Battery Pack MB-40 and AA type battery holder MS-40 available (for eight alkaline manganese, lithium or NiMH batteries or one rechargeable Li-ion Battery EN-EL4).
Check StockSugino Track Chainring Bolt/Nut Set M8X5.7 10/Pcs - #401TK
- Track nut with integral serrated washer to provide added torque with less friction upon tightenting.
- Sugino Chrome-plated steel Chainring Bolts..
Check StockADC Veterinary Thermometer Dual Scale Adtemp 422
- Dual scale with a range of 90°F - 111.9°F ±.2°F (32.0°C - 43.9°C ±.1°C).
- Replaceable 1.55V (Lr41) coin-type battery (included) provides up to 1, 500 measurements.
- Specially designed housing with lanyard attachment for enhanced removal.
- Includes integral carry case and five probe sheaths.
- Meets requirements for intermittent thermometers under astm E1112.
Check StockWoodford V22P-8-MH Vertical Hot and Cold Wall Faucet, Bronze
- Washing the car - sanitary clean-up - pet care.
- Specifications: ASSE 1019-type c listed - anti-siphon with integral check and atmospheric vent - not intended for continuous use.
Check StockNcstar 3-9X42 Mark III Tactical GEN II/ MIL DOT - STM3942GV2
- Integral Quick Detach Base Fits Picatinny Type Mounts.
Check StockMaxpedition Proteus Versipack, Black
- uses the highest quality materials and world-class craftsmanship.
- comprehensive panel of lab tests to ensure quality, reliability and longevity.
Check StockSleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
- CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
- HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
- CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
- CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
- SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check StockSleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100
- CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
- HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
- CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
- CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
- SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock