Categories

Best Intercooler For F15ecoboost

302 & 351W Oil Restrictors, Fits Ford Engines

  • ?Adaptation model?Oil Separator Catch Canister Compatible with 2011-2021 F-150 5.0L | 2011-2021 F-150 5.0L with Roush/Whipple superchargers | 2011-2021 F-150 3.5L EcoBoost | 2015-2021 F-150 2.7L EcoBoost | 2017-2021 Raptor 3.5L EcoBoost | 2018-2021 Expedition 3.5L EcoBoost..
  • ?Function?Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake..
  • ?Advantages?The new design is the 3.0 because it hold 3oz of fluid where the original held a little over 1oz. Drain it every 2000 - 3000 miles and you will never come close to filling it..
  • ?High Quality?Made from solid aluminum billet milling, high reliability and durability. It has a knurled fuel tank base for easy removal to drain waste oil and an O-ring seal to prevent any leakage..
  • ?Perfect service?2 Year Warranty.Friendly return policy and customer service. If you have any questions, please contact us by email, we will reply you within 24 hours..
Check Stock

UPR Fits 13-21 F150 Ecoboost 3.5l & 2.7l VTA blow off valve mod plug Turbo Hiss

  • 1pc F150 Ecoboost 3.5L 2.7L Billet Vent to Atmosphere VTA Mod Plug Raptor.
  • 1pc F150 Ecoboost Twin Turbo 3D Domed OEM Badge Decal.
  • VTA Plug Color May Vary Depending On Inventory.
  • Guaranteed to be the Best Turbo Hiss Mod Available for your Ecoboost F150.
Check Stock

STO N SHO Quick Release Front License Plate Bracket for The 2015-2017 Ford Mustang 2.3 L (with or Without Performance Pack), V-6, and 5.0 Without Performance Package (Track Pack)

  • Fits: 2015 Ford Mustang V6, 2015 Ford Mustang GT, 2015 Ford Mustang EcoBoost, 2015 Ford Mustang GT Premium, 2015 EcoBoost Premium, 2016 Ford Mustang V6, 2016 Ford Mustang GT, 2016 Ford Mustang EcoBoost, 2016 Ford Mustang GT Premium, 2016 EcoBoost Premium.
  • Easily mounts under front valence using factory screws, add more support with included bolt.
  • Mounting hardware & easy-to-follow instructions included.
  • Frame is made of aluminum including the quick-release pins.
  • Pull a pin and your car is showroom ready, then click the license plate back in and drive home.
Check Stock

Engine Oil Restrictors, 4AN Oil Restrictor Thread Fitting M12x1.25 Replacement for GT35 T25 T28 T3 T4 Turbo

  • 【Compatible Vehicle】: This passenger side oil separator fits for 2011-2021 F-150 5.0L, 2011-2021 F-150 5.0L with Roush/Whipple superchargers, 2011-2021 F-150 3.5L Ecoboost, 2015-2021 F-150 2.7L Ecoboost, 2017-2021 Raptor 3.5L Ecoboost, 2018-2021 Expedition 3.5 EcoBoost..
  • 【3 OZ Capacity】: The tank holds 3 oz of fluid. Drain it every 2000-3000 miles and you will never come close to filling it..
  • 【High Quality】: This passenger side oil separator is solid billet construction. Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake..
  • 【Easy Installation】: This oil separatoris easily to install.OEM Style quick connect PCV fittings. It meets even exceeds the oem standard, and has been factory tested and can be installed directly..
  • 【Warranty】: This passenger side oil separator comes complete with 1 Years warranty. Worry-Free Return And Refund Policy, Buy with Confidence! If you have any questions, please contact us with the frame number, and we will provide you with the most correct advice..
Check Stock

Stance Tuning USA Ford Mustang Digital Cluster Plug and Play Kit, 12' LCD Dashboard Speedometer Supports Ford Mustang Manual Auto, Bullitt Startup Animation, for Ford Mustang S550 V6, EcoBoost or GT

  • 2015-2021 Ford Mustang S550 EcoBoost GT OEM 12' LCD dashboard speedometer, steering column housing assembly with programmed SCCM, with programmed GWM gateway, 3 steering wheel switches, new dash bezel,《Vehicle VIN required after payment, pre-programmed》Plug and play, no need to go to a dealer.
  • 2015-2021 Ford S550 GT Digital Cluster We now offer the Bullitt cluster with a 180mph speedometer. This offers both manual and automatic modes, with the automatic mode requiring special programming that.
  • 2015-2021 Ford S550 EcoBoost 12-inch Digital LCD Instrument Cluster This class-exclusive* 12-inch all-digital instrument cluster lets you customize exactly what you want to see while you're driving.
  • 2015-2021 S550 Mustang EcoBoost Digital Cluster Plug n’ Play Kit,MyCcolor Keep it cool, or bring the heat. lets you customize the color of your gauges and set the tone for your drive.
  • 2015-2021 S550 GT V6 Digital Cluster Plug n' This kit includes everything you need to upgrade your old analog cluster to the new digital cluster for 2018+ Mustangs! It will work with any base or premium model -....
Check Stock

New Turbocharger Intercooler/Charge Air Cooler For 2013-2018 RAM Pickup 2500 & 3500 Models, 6.7 Liter Turbo Diesel Engine CH3012102

  • Reference number: 18033, 5010005, FO3012101, 44011513, 6C3Z6K775A, 6C3Z6K775A, 3C3Z6K775AA, 4C3Z6K775BA, 4C3Z6K775BA.
  • Fitment: fits for 2003-2007 F-250 Super Duty 6.0L intercooler.
  • intercooler for 2005-2007 f-350 f-450 f-550 intercooler 6.0L.
  • Please check the compatibility in the product description before purchase, any questions please let us know.
Check Stock

aFe 46-20128 BladeRunner 2-1/2\ Intercooler Tube (Non-CARB Compliant)

  • Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
  • 2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
  • this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
  • These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
  • All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
  • This item is not for sale in California/Non CARB compliant.
Check Stock

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

31x12x3 inch Universal Turbo FMIC Intercooler + 3 inch Piping Kit For Toyota Supra MKIII MK3 7MGTE

  • Intercooler + Piping + Silicon Hose + T-Clamp.
  • Great for Many Turbo Intercooler Applications..
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Rev9 ICK-056-BLACK ICK-056-BLACK Front Mount Intercooler Kit, Stealth Black FMIC Performance Upgrade, Bolt On, compatible with Ford Focus ST 2013-18

  • compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
  • Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
  • With Wind Deflector To Tunnel Air Into The intercooler.
  • Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
  • Included Hardware For Direct Bolt On Installation.
  • No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..
Check Stock

T04E 8PC T3/T4 UNIVERSAL TURBO KIT V-BAND TURBOCHARGER WASTEGATE INTERCOOLER

  • Perfect for 4/6 cylinder 1.5L-2.5L engines. Up to 400HP. Power performance output capability = 25-35 psi. CNC machined flanges..
  • 1 x Turbo Oil Return / Feeding Line Kit: Stainless steel braided, it helps circulate oil from the turbo charger to the oil pan.
  • 1 x Intercooler : Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Intercooler core size: 21*7*2.5 . Support up to 350 hp for this small intercooler size – tube and fin style ..
  • balancing Test by TURBOTECHNICS VSR3. G3-min-Flow VNT Turbo testing. Advanced Actuator Tester/Programmer.
  • Need modifications – Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. ).
Check Stock