Categories

Best Intercooler For Turbocharger

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock

Brock Replacement Driver Performance Upgrade Power Side Door Mirror Textured Compatible with 99-02 Silverado Sierra Pickup Truck 15172247

  • Two year, unlimited-mileage warranty. Guaranteed Exact Fit for easy installation.
  • Direct bolt-in replacement for the factory BorgWarner K03 unit, with larger K04 style compressor housing and wheel..
  • This is NOT LEGAL for sale or use in California, Colorado, or anywhere else that requires CARB emissions certification.
  • Fits all US-spec 1997-2006 Audi A4 & VW Passat 1.8T. Does NOT fit VW Golf, Jetta, Beetle or Audi TT due to different mounting points. This Turbocharger is NOT CARB-approved and not legal for sale in California..
  • This is a K04-style bolt-in high performance upgrade turbocharger. Please note that your results may vary depending on which supporting mods are done to your vehicle. It is HIGHLY recommended that you upgrade your fuel injectors, intercooler, and have the vehicle professionally tuned for maximum potential and reliability.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

MAZDASPEED TURBO MANIFOLD V3-2 For Tial 44mm external gate

  • Made from high quality polyester and pure silicone materials to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay..
  • Resistance Temperature Range: Withstands operating temperatures from -76F to +428F degrees fahrenheit..
  • Pressure Range: 0.6-1.2MPa, surface by smooth finishing..
  • Features:It is very easy to install, hand crafted high quality silicone hose with 4.5mm thickness..
  • For Intercooler,Turbocharger,Supercharger and other systems.
Check Stock

Mishimoto MMINT-F150-15SL Performance Intercooler Compatible With Ford F-150 EcoBoost 2015+ Sleek Silver

  • TURBOCHARGER INTERCOOLER/CHARGE AIR COOLER.
  • Compatible with or fits: 2017 - 2019 Honda Civic Hatchback.
  • Compatible with or fits: 2016 - 2019 Honda Civic Coupe.
  • Compatible with or fits: 2016 - 2019 Honda Civic Sedan.
  • Quality: Premium - High quality new replacement part..
Check Stock

Brock Replacement Drivers Performance Upgrade Power Side View Mirror Heated with Chrome Cover Compatible with 98-08 Crown Victoria Grand Marquis 6W7Z17683BA

  • Two year, unlimited-mileage warranty. Guaranteed Exact Fit for easy installation.
  • Direct bolt-in replacement for the factory BorgWarner K03 unit, with larger K04 style compressor housing and wheel..
  • This is NOT LEGAL for sale or use in California, Colorado, or anywhere else that requires CARB emissions certification.
  • Fits all US-spec 1997-2006 Audi A4 & VW Passat 1.8T. Does NOT fit VW Golf, Jetta, Beetle or Audi TT due to different mounting points. This Turbocharger is NOT CARB-approved and not legal for sale in California..
  • This is a K04-style bolt-in high performance upgrade turbocharger. Please note that your results may vary depending on which supporting mods are done to your vehicle. It is HIGHLY recommended that you upgrade your fuel injectors, intercooler, and have the vehicle professionally tuned for maximum potential and reliability.
Check Stock

AMS Performance Aftermarket Turbo Inlet Tubes Compatible with 2015-2021 F150 2.7L EcoBoost

  • Material: It is made of 100% high quality silicone..
  • Structure: Intake Kit featuring high quality silicone construction, 4-ply polyester.
  • Resistance Temperature Range: Withstands operating temperatures from -40F to 356F(428F) degrees fahrenheit..
  • Pressure Range: 0.3-2.4MPa, special requirement can reach to 3.0MPa..
  • Scope of Application: The Pipe delivers much better air flow for greater efficiency. For charge air, coolant and water, on intercooler, radiator, turbocharger and supercharger, and other systems..
Check Stock

TMKOOL 4-Ply Reinforced High Temperature 1\ ID 45 Degree Elbow Coupler Silicone Hose (RED, 1'')

  • Made from high quality polyester and pure silicone materials to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay..
  • Resistance Temperature Range: Withstands operating temperatures from -76F to +428F degrees fahrenheit..
  • Pressure Range: 0.6-1.2MPa, surface by smooth finishing..
  • Features:It is very easy to install, hand crafted high quality silicone hose with 4.5mm thickness..
  • For Intercooler,Turbocharger,Supercharger and other systems.
Check Stock

ACDelco Professional 26263 Molded Turbocharger Intercooler Hose with Clamps

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Great for marine and industrial use perfect use with Turbocharger, Supercharger, DIY Intake, radiator cooling system and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Meet and exceed Saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Inner Diameter: 3.5"-4" (89mm-102mm). Leg Length: 4.5"X4.5". Wall Thickness: 5mm . We Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

Dorman 667-300 Cold Side Intercooler Pipe Kit Compatible with Select Ford Models (OE FIX)

  • 4-Ply Reinforced High Temp Silicone Coupler and The hose material is high quality silicone, many color and size to choose.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM..
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications..
  • High quality T bolt clamp with Nylon insert locknut performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • Inner Diameter: (76mm) 3". Length: 4.0''(102mm). Thickness: 5mm- LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

Squirrelly 3 Inch Straight Silicone Coupler Kit 3 Pack 3 Layers of Polyester Reinforcement Suitable Pipe Intake Turbo Intercooler with 2x T-Bolt Clamps - Black

  • Squirrelly high quality 3" inch universal straight coupler is perfect for air intake, intercooler piping and other turbo applications..
  • Squirrelly's line of silicone couplers feature 3 layers of polyester reinforcement and are suitable for applications with boost pressures up to 45psi..
  • This straight reducer coupler features a temperature rating of 428°F for direct to turbocharger installations..
  • The measurement for this coupler is 3" inches wide opening on both end and 3" inches long..
  • Package includes: 1x 3" inch Straight Silicone Coupler, and 2x 3" inch T-Bolt Clamps.
Check Stock

LTI Universal (305mm) 12\ Length 4-Ply Reinforced High Performance (76mm) 3\ ID Straight Coupler Silicone Hose (3\ BLACK)

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Great for marine and industrial use perfect use with Turbocharger, Supercharger, DIY Intake, radiator cooling system and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Meet and exceed Saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Inner Diameter: 3.75"-4" (95mm-102mm). Length: 3". Wall Thickness: 5mm . We Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock