aFe 46-20128 BladeRunner 2-1/2\ Intercooler Tube (Non-CARB Compliant)

  • Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
  • 2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
  • this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
  • These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
  • All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
  • This item is not for sale in California/Non CARB compliant.
Check Stock

Igloo ICEC33SB 33-Pound Large Capacity Automatic Portable Countertop Clear Ice Cube Maker, Black

  • Large Ice Making Capacity : Keep the water tank filled and this unit will produce 33 pounds of clear ice cubes in a 24 hour period.
  • 24 Ice Cubes : Makes 24 square shaped clear ice cubes per cycle.
  • Clear Vs. Cloudy Ice Cubes : Clear ice cubes tend to last longer and keep drinks colder than traditional faster melting cloudy white ice cubes.
  • Quick Freezing Ice : Makes 9 small or largecube shaped clear ice cubes in as little as 7 minutes.
  • Control Panel : Simple to understand and illuminated with LED lights, the electronic control panel lets you know when you need to add water, when the ice basket is full and allows you to choose the size of the ice cubes.
  • Automatic Shutoff: Unit will shutoff automatically after 16 hours of continuous use.
  • Removable Ice Basket : Ice basket easily removes to transfer ice cubes to glasses or coolers.
  • Easy View Water Tank: Clear lid and water tank allows for easy viewing of ice cube capacity.
  • Ice Scoop: Included accessory is great for easily filling glasses or coolers.
Check Stock

31x12x3 inch Universal Turbo FMIC Intercooler + 3 inch Piping Kit For Toyota Supra MKIII MK3 7MGTE

  • Intercooler + Piping + Silicon Hose + T-Clamp.
  • Great for Many Turbo Intercooler Applications..
Check Stock

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

Weld on Bung 12AN Hose Barb Aluminum Nipple 3/4 inch Barbed Weldable Pipe Adapter Fittings

  • 3/4" (AN 12) hose barb weld in bung adaptor nipple Barbed Weldable for Oil Cooler / Turbo Charger / Braking.
  • Most commonly used when needing to attach AN lines to areas that don't currently have an AN flare.
  • A few examples would be: Intercooler piping, Intake manifold, or even a custom overflow tank.
  • All of our weld on fittings have minimal anodizing to ensure proper and ease of welding.
Check Stock

Cooling Fan for PS4 Pro USB External Cooler 5 Fan Turbo Temperature Control Cooling Fans for Sony Playstation Gaming Console

  • Universal intercooler provides optimal flow and volume for high horsepower vehicles.
  • Overall Size: 31” x 12” x 4” / Core Size: 24” x 12” x 4”.
  • Inlet & Outlet: 3” / Tank Wall Thickness: 5mm / Max PSI: 32.
  • Robust, one-piece cast aluminum end tanks withstand high boost pressures.
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Rev9 ICK-046 made for Subaru Impreza WRX/WRX STI 2002-07 Front Mount Intercooler Kit Gen 2

  • This will fit: 2002 2003 2004 2005 2006 2007 Subaru WRX / STi (all turbo models).
  • 6 x pieces polish aluminum pipe set up 9 x polyester reinforced High temperature silicone hose 17 x T-Bolt Clamp 1 x coolant overflow tank 1 x intake....
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 300-550hp core length: 28" core height: 9 1/2" core....
  • NOTE: You can keep the factory foglights with this kit.
Check Stock

ADJ Products Entour Chill

  • Specifications: 800W Low-lying fog stays low to the ground – similar to a dry ice effect Ice tank capacity: 2. 5 kg. Fog Fluid tank: 1-liter internal tank Water drainage valve system allows for easy clean-up. Water drains directly into the provided plastic bag..
  • Features: New Heater system for continuous output with no additional warm-up time Fire resistant rugged plastic case Uses standard water-based fog juice and ice cubes Continuous output (run up to one hour at max output continuous) No need for expensive fog chillers, bulky air conditioning units or dry ice New sophisticated electronic temperature control: heats up in 3 minutes and stays heated LED heating indicator system in tank: Red = Heating.
  • Uses regular ice and includes a wired remote to set up on an auto output you can set the blast time and output or manually trigger this from a remote spot.
  • Electrical: Power On/Off switch Locking power connection Multi-voltage operation: AC 120-240V, 50/60Hz Power consumption: 820W max.
  • Dimensions / Weight: Dimensions (LxWxH): 16. 5” x 11. 69” x 10. 75” / 420x297x273mm Weight: 17. 25 lbs. / 7. 8 kg..
  • PRO TIP #1: Make sure you tighten the knob on the ice ....
Check Stock

GE Profile Opal | Side Tank for 2.0 Opal Nugget Ice Maker | Easy Attachment to Opal Ice Machine | 0.75-Gallon Tank | Allows for 3X More Ice Before Refill | Stainless Steel (P4AAKASSPSS)

  • .75-GALLON SIDE TANK - This .75- gallon side tank is compatible with(black stainless steel-XPIO23BCBT or stainless steel-XPIO23SCSS) and has a slim and rounded design that complements the main Opal ice maker and helps maintain a compact footprint on the countertop.
  • CONVENIENT AND EASY - Easy to use, simply fill when ice is getting low, then flip into the home base and soon you'll be enjoying more delicious nugget ice.
  • MORE ICE - Using the ice maker side tank produces 3x more ice than using the reservoir alone, which also helps to reduce water refills during high demand.
  • EASY-TO-CLEAN SIDE TANK - Easy-to-clean ice maker side tank detaches, making cleaning quick and simple.
Check Stock

Cold Side Intercooler Pipe with Boots Compatible with 2003-2007 Ford 6.0L Powerstroke Diesel

  • Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
  • Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
  • Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Rev9 ICK-056-BLACK ICK-056-BLACK Front Mount Intercooler Kit, Stealth Black FMIC Performance Upgrade, Bolt On, compatible with Ford Focus ST 2013-18

  • compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
  • Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
  • With Wind Deflector To Tunnel Air Into The intercooler.
  • Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
  • Included Hardware For Direct Bolt On Installation.
  • No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..
Check Stock