Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 3 Pin PC Fan Controller, 5V Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported)
- ...on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load..
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized)..
- Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.).
Check StockLCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)
- With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
- At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
- This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
- The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
- 2.8 inch color screen, support 65K color display, and the display is colorful.
Check Stock16x2 Blue LCD Module Controller HD44780 Based for Arduino by Corpco
- Size: 1.54in screen can provide clear view for you..
- Drive Voltage: 3.3V-5V. The pin has good contact performance, ensure stable working.
- Material: Adopted of high quality electronic components, and preciseness process, ensure for the durability.
- Resolution: 128 x 64. Great workmanship, easy and convenient to install. Driver IC: SSD1309, compatible with SSD1306. Interface: SPI interface I2C interface.
- Optional Style: Display White, Display Yellow, Display Blue. Available in three colors for your choice..
Check StockBasic 16x2 Character LCD - RGB Backlight 5V
- DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
- 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
- CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
- COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
- WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock40PCS NFC Tags NTAG215 NFC 215 Cards 504 Bytes Memory Blank PVC Cards Ntag215 NFC Chip for NFC Phone and Device Writeable Programmable
- 1) This device is used to read and copy 125KHz and 13.56MHz frequency RFID key cards..
- 2) Support card type: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. Can't support HID chip..
- 3) Support card type: for 13.56MHz IC type: Mi-fa re 1k, UID, FUID, CUID, UFUID, IC Half-encryption, IC Full-encryption etc. (Not all type encrypted....
- 4) Provide free software, very easy to use. Mini and light weight. Connect this device to your computer with the USB cable, then can find the....
- 5) Has a USB interface, Two-color LED light prompt. Built-in buzzer "beep" sound reminder. Package including 1RFID copier + 1 USB cable + 5 RFID T5577....
Check StockKey Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module
- DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
- 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
- CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
- COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
- WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check StockCompatible with Donerton Smartwatch Charger Magnetic USB Charging Cable Replacement Charger for Donerton P22/Popglory Smartwatch/CanMixs feifuns kalinco P22 1.4 smartwatch Black
- There is Build-in Short-circuit protection IC in this charger to avoid overvoltage and overcurrent. If the charger meets short-circuit situation, the protection IC will cut off the circuit automatically. If you forget to unplug the charger after charging, the Protection IC will keep the safety.
- Easy To Carry: You can easily store this USB cable in your bag and take it anywhere you go. It is also ideal for leaving at the office or storing in your car..
- Replacement charger for your P22 smartwatch Your P22 smartwatch will No More "Dead" again. You can charge it at home, in office, in car or on travel. Make your P22 smartwatch charging become more convenient..
- Interface: micro usb. Charger Dock ONLY, smartwatch not included!!.
Check StockLCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)
- 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
- With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
- This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
- On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
- We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check StockDisplay Screen Module 1.54in 7Pin SSD1309 Drive IC 128x64 SPI Interface,Display Screen Module,LCD Character Modules,Drive Voltage 3.3V-5V(Show White)
- Size: 1.54in screen can provide clear view for you..
- Drive Voltage: 3.3V-5V. The pin has good contact performance, ensure stable working.
- Material: Adopted of high quality electronic components, and preciseness process, ensure for the durability.
- Resolution: 128 x 64. Great workmanship, easy and convenient to install. Driver IC: SSD1309, compatible with SSD1306. Interface: SPI interface I2C interface.
- Optional Style: Display White, Display Yellow, Display Blue. Available in three colors for your choice..
Check Stock2X DS1387 Semiconductor Dallas IC Integrated Circuit RAMified Real Time Clock
- 003cb003ePrice For:003c/b003e Each 003cb003eDate Format003c/b003e: Day.
- Year 003cb003eClock Format003c/b003e: HH:MM:SS 003cb003eClock IC Type003c/b003e: RTC 003cb003eSupply Voltage Min003c/b003e: 4.5V 003cb003eSupply Voltage Max003c/b003e: 5.5V 003cb003eClock IC Case Style003c/b003e: EDIP 003cb003eNo. of Pins003c/b003e: 24Pins 003cb003eIC Interface Type003c/b003e: Bytewide 003cb003eOperating Temperature Min003c/b003e: 0°C 003cb003eOperating Temperature Max003c/b003e: 70°C 003cb003eProduct Range003c/b003e: - 003cb003eAutomotive Qualification Standard003c/b003e: -.
- 003cb003eRoHS Phthalates Compliant003c/b003e: To Be Advised.
Check Stock
SparkFun MicroMod Artemis Processor - Modular Interface Ecosystem That Connects Artemis microcontroller/Processor Board to Various/Carrier Board peripherals
- Artemis General Features: 1M Flash / 384k RAM, 48MHz / 96MHz turbo available, 6uA/MHz (operates less than 5mW at full operation), 48 GPIO - all interrupt capable, 31 PWM channels, Built in BLE radio and antenna.
- Additional Artemis Features: 10 ADC channels with 14-bit precision with up to 2.67, million samples per second effective continuous, multi-slot sampling rate.
- Additional Artemis Features: 2 channel differential ADC, 2 UARTs, 6 I2C buses, 6 SPI buses, 2/4/8-bit SPI bus, PDM interface, I2S Interface, Secure 'Smart Card' interface, FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS).
- Specific Peripherals made available on MicroMod Artemis: 1x USB dedicated for programming and debug, 1x UART with flow control, 2x I2C, 1x SPI, 1x Quad-SPI, 8x Fast GPIO, 2x Digital Pins, 2x Analog Pins, 2x PWM, 1x Differential ADC pair, Status LED, VIN Level ADC.
- Additional peripherals are available but are shared on dedicated MicroMod pins. Processor board only, additional carrier board(s) will be needed to use..
Check Stock
DiGiYes Universal Ultra Slim Wireless Charger Charging Receiver Module 5V 1A for Android Phone with Micro-USB Interface
- This wireless charging receiver module is stable and compatible for most phone with micro USB interface, please check the location and feature of Micro USB interface in your mobile before purchasing(As illustrated).
- Do Not use with metal cases or cases with metal(copper foil,steel sheet,etc).
- Ultrathin design, compact and lightweight without increasing additional weight of the phone. 8mm through-thickness reception. No need to take off protective cover case. Easy to carry wherever you go..
- 5V/1A high current output provides rapid wireless charge. Works well with any Qi-enabled wireless charging pad..
- Easy assembly and disassembly: Take off the back cover, attach the Energy Card on the battery, put on the back cover. Compatible with the handsets with micro USB interface and the micro USB interfece in the middle of bottom side(As picture)..
- Can be attached to the battery all the time, it will not interrupt the normal use of your phone. Adopt intelligent control charging IC make your phone charge safer and stable.
Check StockICOM 2300H 05 144MHz Amateur Radio
- Similar user interface retained from the ic-2200h.
- Proven durability -- tested to the latest mil-std-810 g specifications.
Check Stock
