Categories

Best Internal Drive Bracket

EVAR V8 Engine Model Kit That Works for Adults, V8 Engine Internal Combustion Engine Model DIY Assembly Kit for AX90104 SCX10 Capra VS4-10 Pro/Ultra Model Car

  • Design: V8 internal combustion engine structure and principle design, pulley winding drive structure, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, screw near and far valve intake manifold, oil pan structure, power drive plate plug interface..
  • Performance: based on pre colored products, users need to install. The V8 engine model can simulate electric operation. At the same time, considering the stability and reliability of operation, we made a full bearing structure of the drive part in a small space..
  • Application: Analog V8 engine is applicable to many RC models, such as AX90104, SCX10, Capra, VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a good decoration, which can exercise the ability to assemble and restore the V8 engine..
  • Tip: This engine kit does not include a bracket. You can select the corresponding engine bracket according to your model. The engine and bracket are sold at the same time..
Check Stock

Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car

  • Mini Engine Model Toys: Kids DIY Toy V8 Combustion Engine Models Kit That Works! This mini replica of a classic four-cycle 8-cylinder internal combustion gasoline car engine teaches young minds all about the wonderful world of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids..
  • Simulation Metal Engine: V8 internal combustion engine structural principle design, drive structure of belt wheel winding, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, spiral near and far valve intake manifold, oil pan structure, and power supply drive board plug interface..
  • Model That Works: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables into the battery pack distributor and watch the engine fans turn around with real engine sounds..
  • Application: The simulated V8 engine is suitable for a variety of RC models such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powe....
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

Hard Drive Tray for Dell OptiPlex 3040 5040 7040 MT Inspiron Vostro 3600 3650 Bay Caddy HDD 2.5 SSD Bracket X9FV3

  • Fits Dell Optiplex 3050, 5050, 7050, 9050 3060 5060 7060 MT, OptiPlex 3040, 5040, 7040 MT Inspiron Vostro 3600 3650 3668.
  • This is NOT a 3.5" to 2.5" adapter - fits a 2.5" SATA SSD/HDD to Dell 2.5" internal drive bays.
Check Stock

Pasow 2 Pack 2.5" to 3.5" SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter for PC (Bracket)

  • 16pcs screws included for mounting the bracking onto the PC case.
  • Fit in any desktop computer or device with 3.5 inch internal drive bay..
  • 2.5″ To 3.5″ Mounting Adapter Bracket, Support 2.5″ hard drives (SSD and HDD).
  • Maximize the internal space of your computer case for efficient usage.
Check Stock

Oem For Dell Hard Drive OptiPlex 3040 5040 7040 MT Inspiron Vostro 3600 3650 Bay Caddy HDD 2.5 SSD Bracket X9FV3

  • Fits Dell Optiplex 3050, 5050, 7050, 9050 3060 5060 7060 MT, OptiPlex 3040, 5040, 7040 MT Inspiron Vostro 3600 3650 3668.
  • This is NOT a 3.5″ to 2.5″ adapter – fits a 2.5″ SATA SSD/HDD to Dell 2.5″ internal drive bays.
Check Stock

Club Clean Mounting Brackets Yamaha Drive Bracket

  • Specialty Bracket for Yamaha Drive 1 and Drive 2 model carts..
  • The Yamaha Bracket is a direct fit bracket for mounting your Club Clean Club & Ball Washer to either the driver or passenger side of your Yamaha Drive/Drive 2 model golf cart..
  • Powder coated steel ensures maximum durability and stability that will last for years to come..
Check Stock

PC Computer Screws Standoffs Set Kit, for Hard Drive Computer Case Motherboard Fan Power Graphics

  • ➤Material: High Quality brass and steel, which have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
  • ➤ Size : Total 8 different computer pc screws, different screw can meet your different needs..
  • ➤ Personal Computer Screw Standoffs Set Kit for installing or repairing an internal CPU disk, motherboard, radiator, cooling fan, power tower, graphic card, hard drive, case, monitor, flat panel screen, or CD-ROM..
  • ➤Package includes: PC case screws, power supply, motherboard screws, hard drive screws, fan screws, brass bracket mounting screws and insulating washers.
  • ➤5pcs high quality #6-32x6mm Desktop Computer PC Case Chassis Thumb Screws M3.5 Tool-Less Adjustment.
Check Stock

SSD HDD Holder 2.5 to 3.5 Mounting Bracket Hard Drive Adapter 2 Pack Black

  • Support 2.5" HDD/SSD Mounting Adapter Bracket.
  • M3 + #6-32*6 screws included for mounting the bracking onto the PC case.
  • Fits in desktop PC case with standard 3.5" internal drive bay (all popular PC casings).
  • The best electing for DIY. 30 days product Replacement or Full Refund if you are not satisfied.
Check Stock

suiwotin 12PCS SSD Bracket 2.5 to 3.5 Adapter, SSD HDD Hard Disk Drive Bays Holder, SSD Mounting Bracket Kit Metal Mounting Bracket Adapter with Screwdriver and Screws

  • 【Package Includes】 -- 12 x Hard Drive Adapter SSD Bracket, (Mounting screws and screwdriver are includes)..
  • 【Premium Material】 -- Metal mounting adapter bracket is made of high quality material, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
  • 【Function】 -- SSD mounting bracket specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC, protecting your hard disk effectively..
  • 【Easy To Install】 -- With free mounting screws and screwdriver, using precision die stamping, great assemblability, easy to install and quick. works with HDD / SSD, compatible with SATAI SATAII SATAIII..
  • 【100% SATISFACTION GUARANTEED】-- If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products..
Check Stock

Supermicro Rack Mount Server Chassis CSE-505-203B,Black

  • 9 8"-Depth Mini 1U chassis support for maximum motherboard size - 6 75" x 6 75" Mini-ITX.
  • Drive Bays 1x 3 5" Internal Drive Bay (w/ 1x Half-height Half-length PCI Slot) or 2x 3 5" Internal Drive Bay or 2x 2 5" Internal Drive Bay (w/ 1x Full-height Half-length PCI Slot) or 4x 2 5" Internal Drive Bay.
  • Expansion Slots 1x PCI Slot (Full-height Half-length).
  • Power Supply 200W 80 PLUS Gold Certified Low Noise AC-DC Power Supply w/ PFC.
Check Stock

StarTech.com 3.5' to 5.25' Front Bay Adapter - Mount 3.5' HDD in 5.25' Bay - Hard Drive Mounting Bracket w/ Mounting Screws (BRACKETFDBK)

  • TAA Compliant: This TAA compliant 3.5" to 5.25" hard drive mounting bracket adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases..
  • Easy to use: The front bay hard drive mounting bracket lets you install a 3.5" floppy drive, external facing USB hubs, media card readers, and fan controllers into the front bay of your computer..
  • Sturdy design: The 3.5" to 5.25" front bay bracket features an attractive open-faced black bezel that provides a secure fit..
  • Easy installation: This hard drive mounting bracket comes complete with 4 x mounting screws for a hassle-free installation..
Check Stock

Inateck Mounting Bracket for 2 x SSD/HDD, Compatible with Regular PC and Mac Pro 2019, with SATA Cable and Installation Tool

  • Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
  • Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
  • Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
  • Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
  • Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..
Check Stock