Categories

Best Internal Tap Fittings

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • ...te snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly.
  • MEASURE PRESSURE AND RECHARGE R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.
  • SATISFACTORY CUSTOMER SERVICE: This air conditioning U hose gauge is very simple and easy to use, dynamic pressure measurement and R134A refrigerant charging. 30 days full refund with returned undamaged JIFETOR AC refrigerant charge hose. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

QWORK 1/2\ - 14 NPT Pipe Tap, Carbon Steel, for Clean and Re-thread Damaged or Jam Pipe Threads

  • Characteristics:QWORK 1/2"-14 NPT Pipe Tap is an ideal choice for pipe fittings..
  • Size: 1/2" size with 14 NPT (National Pipe Taper)..
  • Usage: Used to cut internal threads of pipes..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Tatuo 35 Pack Garden Hose Washers Silicone Rubber Washers Seals O Rings Red Soft Silicone Gasket Fittings for 3/4 Inch Garden Hose and Water Faucet

  • Package includes: 35 pack red silicone garden hose washers, good sealing and packing together in bag for delivery.
  • Design: quality real silicone rubber, 250'F temperature use on hot water line washing machine.
  • Method of use: easy to repair a leaky water tap connection, disconnect water controller at first, then twist the faucet and replace the original broken one, good replacement part for garden hoses with water tap.
  • Material: these silicone rubber gaskets are made of good quality silicone rubber, durable, soft silicone better sealing and leave scratches.
  • These garden washers fit all standard 3/4 inch garden hose fittings.
  • Sizes: each one is made in regular specification, the garden silicone rubber washer external diameter is 1 inches/ 25 mm, the internal diameter is 5/8 inches/ 16 mm, the thickness is 1/8 inches/ 3 mm.
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Kegco Kegerator, With Kegs, Black

  • ... handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve..
  • POWERFUL COOLING TECHNOLOGY: Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit, low enough to dispense kegged beer or high enough to ferment homebrew. Fan-forced cooling helps maintain the optimal refrigerated storage environment, and an air-cooled draft tower ensures that every drop of beer remains refreshingly chilled from the keg to your glass..
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
  • it will not tap commercial D system kegs.
Check Stock

Kegco Kegerator, With Kegs, Black

  • ... and handles for easy carrying The ball lock fittings can be easily accessed for cleaning and maintenance and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
  • POWERFUL COOLING TECHNOLOGY Intuitive push button controls and a clear LED display make it easy to precisely set the internal temperature between 32 and 75 degrees Fahrenheit low enough to dispense kegged beer or high enough to ferment homebrew Fan-forced cooling helps maintain the optimal refrigerated storage environment and an air-cooled draft tower ensures that every drop of beer remains refreshingly chilled from the keg to your glass.
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
  • it will not tap commercial D system kegs.
Check Stock

30 Pack Garden Hose Washers Rubber Washers Seals Fit All Standard 3/4 Garden Shower Hose and Water Faucet Fittings

  • Pack of 30 black garden hose washers with 4 small outer tabs, good replacement parts for garden hoses. Enough quantity to repair and replace..
  • Made from heavy duty thermoplastic rubber construction..
  • These heavy duty rubber hose gaskets fit all standard 3/4" garden hose fittings.
  • Size detail: the garden rubber washer internal diameter is 5/8 inches/ 16 mm, the external diameter is 1 inches/ 25 mm,the thickness is 1/8 inches/ 3....
  • EASY TO ASSEMBLE: Disconnect water controller, then twist the faucet and replace the original one. Easy to replace and fix a leaky water tap....
Check Stock

Wadoy R12 Side Can Tap for Refrigerant Manifold System, 3-in-1 Side Mount Can Tap Valve, 1/2" -Male and 1/4FL-Male Ports, R134A Side Can Tap

  • 【PACKAGING includes】: 1X R12/R134A Side Can Tap (green), Built-in, hinged can adapters allow use with multiple can sizes ( even the small oil charge cans ).
  • 【SAFE & CONVENIENT】:1/2"-Male and 1/4" FL-Male fittings with an internal check schrader valve to prevent system leakage, and allow for storage of partially used cans.
  • 【PREMIUM QUALITY】: Made of high impact HDP composite, good strength, good toughness, and can withstand high-strength external force, solid construction and long- lasting use.
  • 【 CLEVER DESIGN】: 3-in-1 versatility, eliminates the need for 3 separate tools. The "pliers style" grip is easy to use and has a positive locking latch to insure secure engagement.
  • 【WIDE APPLICABILITY】: 1/2"(134A) and 1/4" (R12) FL pure brass fittings ports, will work on all R134a (2 7/8") or R12 (2-1/2") refrigerant and oil charge (2") cans.
Check Stock

Aupoko R-134A Can Tap, 2-in-1 Side Bottle Opener, R22 R12 Can Tap Refrigerant Dispense AC Connecting 1/4 SAE and 1/2 Thread, for Refrigerant Manifold System

  • 【WIDE COMPATIBILITY】 This 2-in-1 side can tap fits for air conditioning oil charge cans included R13A R22 & R12 manifold system..
  • 【EASY INSTALLATION】 Provides a quick and hassle-free way to connect to a can of R12 or R134A refrigerant, oil, or additive when working on automotive air conditioning systems..
  • 【PREMIUM QUALITY】 Made of a durable, super rigid plastic with a metal hinge pin that adds additional strength at this critical location, with solid construction and long- lasting use..
  • 【SAFE & CONVENIENT】 1/2"Male and 1/4" FL-Male fittings with an internal check schrader valve to prevent system leakage, and allow for storage of partially used cans..
  • 【1 YEAR WARRANTY】 We offer 1 YEAR WARRANTY, true worry-free shopping experience. If this can tap ever fails please contact us for a replacement or refund in the limited time. But please ensure that the package the same with before you ordered..
Check Stock

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

  • 【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
  • 【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
  • 【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
  • 【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
  • 【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).
Check Stock

Boltigen Self Sealing R134A Can Tap Valve Refrigerant Dispenser with Tank Adapter for 1/4 and 1/2-inch AC Freon Charging Hose

  • 【ECO-DESIGN】The feature of our can tap is：self sealing. It is easy to open R134a can throgh the R134a can tap and safely turn off R134a can to reserve for future use without any waste.The eco-friendly design meets EPA enviroment friendly policy..
  • 【WIDE COMPATIBILITY】Our r134A can tap fits R-134a cans with ACME threads to directly connect 1/4" SAE (R12 R22) female fitting AC charging hose .Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose..
  • 【SAFE QUALITY】Round smooth handle for easy operation, body made of heavy duty brass and premium anodized aluminum to last under extreme conditions..
  • 【APPLICATION】The can valve connect to R-134a cans with 1/2-16 ACME female threads, the other end of the R134a can valve connects with 1/4 SAE female fittings ac charging hose..
  • 【SERVICE】Our QC department do 100% quality inspection on the R134A can adapter before delivery. We will do 100% refund if the R134a valve tool is defective. If you have any questions about the can tap you have bought, please feel free to connect us. Your valuable suggestions and advice will be greatly appreciated by our team..
Check Stock