Categories

Best Internal Threading

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

THINBIT 3 Pack STTD2 'S' Series, Uncoated Carbide, Threading Insert for 15 to 56 TPI in Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Uncoated DURA-MAX 2000 carbide threading insert for steel, cast iron and stainless steel with interrupted cuts..
  • 15 to 56 TPI (threads per inch). 60 degree included angle. Centered orientation for threading within .046" of a shoulder. Internal threading with 1.250" minimum bore..
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock

Harris H1572730 ProForce 1.5 HP Above Ground Pool Pump 115V ((1.2 THP))

  • **THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • Stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability.
  • Advanced engineering provides high efficiency and minimal noise.
  • Meets or exceeds all CSA and ETL requirements.
  • 115 volts. 1.5 inch internal threading and 2.5 inch external threading and comes with standard three-prong plug connection on a 3 foot cord..
Check Stock

Doheny's Above Ground Pool Pro Swimming Pool Pumps (1 HP)

  • THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • If you’re looking for value, Doheny’s Pool Pro pumps offer dependable performance, outstanding results and cost less than big name brands!.
  • Stainless steel 1.5 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability.
  • Advanced engineering provides high efficiency and minimal noise and meets or exceeds all CSA & ETL requirements.
  • 1.5 inch internal threading and 2.5 inch external threading and comes with standard three-prong plug connection on a 3 foot cord.
Check Stock

Doheny's Above Ground Pool Pro Swimming Pool Pumps (1.5 HP)

  • THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • If you’re looking for value, Doheny’s Pool Pro pumps offer dependable performance, outstanding results and cost less than big name brands!.
  • Stainless steel 1.5 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability.
  • Advanced engineering provides high efficiency and minimal noise and meets or exceeds all CSA & ETL requirements.
  • 1.5 inch internal threading and 2.5 inch external threading and comes with standard three-prong plug connection on a 3 foot cord.
Check Stock

Painful Pleasures Threaded Taper for Ears, Piercing and Stretching Kit For Navel, Nose, and Other Areas, Medical Grade Stainless Steel, 1 Inch Long, 1.2mm at Thickest Point, 16g with 0.8mm Threading

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • AUTOCLAVE SAFE - These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Add 1” piercing needles to pierce and install internal jewelry in one motion..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge has a 0.8mm x 2.0mm thread on the end and offers internal threading of 0.8mm. Use on navel, nose, and other areas..
  • FOR INTERNALLY THREADED JEWELRY - Use the hand taper to install 0.8mm thread pattern jewelry. Our bent and circular 16g internal is 0.8mm threading. Not suitable for 0.9mm Labrets and Straights..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock

Harris H1572728 ProForce 3/4 HP Above Ground Pool Pump 115V ((0.55 THP))

  • THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **.
  • Stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability.
  • Advanced engineering provides high efficiency and minimal noise.
  • Meets or exceeds all CSA and ETL requirements.
  • 115 Volts, 1.5 inch connection sizes on both suction and discharge ports, 1.5 inch internal threading, 2.5 inch external threading, have a convenient drain plug and come with standard three-prong plug connection on a 3 foot cord.
Check Stock

Vector Tools Tap and Die Set, Premium, SAE & METRIC, Titanium Coated, 80-Piece

  • EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • HIGH STRENGTH ALLOY STEEL: GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
  • Titanium coating provides more rust resistance and durability than plain finished products HARD CASE INCLUDED: ABS hard case for organization, protection and safe storage.
  • Tap and dies allow cutting and repair of external or internal threads by hand.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock