Categories

Best Inverter Welders

SUNGOLDPOWER ARC MMA 200A Welder Dual 110V 220V IGBT Hot Start Welding Machine DC Inverter Welder 200 AMP LCD Anti-Stick

  • Please Note: some cheaper welders are only about 7-10lbs, looks like a toy.
  • however, SUNGOLDPOWER welder is heavier than others, because SUNGOLDPOWER welder is full-bridge welder (many cheap welders are half bridge welder), we use more high quality components to support its perfect working and long-life time..
  • 2.Advanced control module IGBT dual 110V and 220V, improves the performance of the welding machine. IGBT MMA welder adopting advanced full bridge IGBT inverter technology.
  • 3. Anti-sticking preventing against over loading the unit easing removal of the electrode,thermostatic control,fan cooled carrying strap and handle..
  • 4. Hot start, arc force overload protection：over-voltage protection, under voltage protection, over current protection, over load protection.
  • 5. Supplied complete with AC Plug，electrode holder and cable, earth clamp and cable, Complete package..
Check Stock

Klutch MP230SiDV LCD MIG Welder with Multi-Processes, Spool Gun, LCD Display and Dual-Voltage Plug - Inverter, MIG, Flux-Cored, Arc and TIG, 120V/230V, 40 to 200 Amp Output

  • Inverter technology requires 25% less input power and delivers consistent power output.
  • 50% lighter than transformer welders (when compared to conventional welders) making this welder easy to transport.
  • Performs MIG Welding 40 to 90 Amps DC with 140 peak (@ 120V) and 40 to 200 Amps DC (@ 230V).
  • LCD control screen provides quick and easy setup with save for future setup mode.
  • Consistent output delivers very strong welds.
Check Stock

Klutch MIG 140i Flux-Core/MIG Welder - Inverter, 120V, 30-140 Amp Output

  • Increased power in a super lightweight package for exceptional portability.
  • The inverter system better handles fluctuations in input power for consistent output and better welds.
  • Requires less input amperage, reducing the overall input power requirement by up to 25% when compared to traditional transformer welders.
  • Versatile welder handles mild steel, stainless steel and aluminum.
  • Welds 24-ga. to 3/16in. steel in a single pass.
Check Stock

DEKOPRO 200Amp MMA Welder 110/220V Stick Welder Dual Voltage ARC Welders Portable Welding Machine Electrode Holder,Work Clamp Input Power Adapter Cable and Brush

  • Safe and Stable: Closed-loop feedback control, built-in fan and ultra-low voltage intelligent regulator on the machine, stable output voltage, easy to....
  • High Efficiency and Energy Saving: Pure copper core cable and Inverter welder reduces the damage of copper and iron. It switch AC to DC then produce....
  • Advanced IGBT Inverter Technology: 110V/220V dual voltage, the unique IGBT control mode of MMA welders improves the reliability of the welding....
  • Portable Design: The arc welder is compact and lightweight, easy to movement and store. The stick welder features a easy carrying handle handle, easy....
  • Multi Use: 200A MMA welding machine is widely used, very suitable for outdoor maintenance, farm, road equipment, maintenance and repair. The welder is....
Check Stock

THANOS ARC Welder,160A Digital Inverter IGBT MMA Welding Machine,110V/220V Dual Voltage Hot Start Portable Stick Welder kit.

  • 【Digital IGBT Inverter Technology】This ARC Welder come with Dual voltage 110V/220V, and powerful advaced unique IGBT control mode improves the reliability of welding machine. Welding mild steel, weld steel, stainless steel and cast iron..
  • 【Easy to Operate and Portable Design】The soldadoras inverter 110V 220V equiped with digital display and trouble indicate, read the output welding current. is so easy to use that it can be used by novice or master welder.With a easy carrying handle, light weight, easy for carrying and storage..
  • 【Leading Control Mode】THANOS portable Welding Machine has closed loop feedback control,the output voltage is stable,strong adaptability for electricity network to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
  • 【Multi Use】The MMA stick welder is suitable for welding stainless steel, mild steel, aluminum and other metal materials..
  • 【100% Money Back Guarantee】THANOS Welder Machine offers good warranty.If you’re not satisfied with your purchase, we’ll refund you- no questions asked. Faulty arc welders can also be replaced within 30 days..
Check Stock

Klutch MIG Welder with Multi Processes - Inverter, MIG, Flux-Cored, Arc and TIG, 120V, 30-90 Amp Output, Model Number MP140Si

  • Inverter technology requires 25% less input power.
  • 50% lighter transformer (when compared to conventional welders).
  • Spot timer allows the operator to create short-timed welds for consistent spot welds.
  • Digital meters allow the operator to preset welding amperage (stick welding) and voltage (MIG welding).
  • Meters display real time welding parameters.
Check Stock

PreAsion Aluminum Spool Gun Welding Torch Fit Miller210 Spoolmate 3035 Miller Matic Welding Machine with 16.4 FT Cables DC24V Motor with 10pcs Contact Tips for Professional Welder

  • Inverter technology requires 25% less input power.
  • 50% lighter transformer (when compared to conventional welders).
  • Spot timer allows the operator to create short-timed welds for consistent spot welds.
  • Digital meters allow the operator to preset welding amperage (stick welding) and voltage (MIG welding).
  • Meters display real time welding parameters.
Check Stock

LOTOS TIG200 200A AC/DC Aluminum Tig/Stick Welder Square Wave Inverter with Pedal and Mask and Welding Tips & Tricks Tig Finger Heat Shield bundle

  • Automatic Dual Voltage (110VAC/220VAC), Dual Frequency ( 50Hz/60Hz ).
  • Input Voltage: 110~220 VAC (Auto Detected-NO Switch is necessary).
  • Square-wave inverter for accurate aluminum welding.
  • Both HF start hand torch control and precise foot pedal welding heat control.
  • Finish that long pass without burning your fingers.
  • Pocket size durable design ideal for any tig job.
  • Increases the lifespan of your tig glove.
  • Great for hobbyists and industrial welders.
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Tig Life Tig Welding Shirts for Men Tig Welder Gift

  • Tig life is a welding shirt for tig welders who enjoy stacking dimes and laying the perfect bead. Makes a great welder gift, birthday gift or Christmas gift for professional welders, welding enthusiasts, amateur welders, or anyone who loves tig welding..
  • Tig life is a great welding shirt for tig welders. Show your love of tig welding with this tig welding shirt for welders of any age. Makes a great Christmas gift for tig welders. Amp up your welding apparel with this tig life welding shirt for men or women.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

SIMDER Arc Welder 130Amp 110V 220V Stick MMA Welding Machine IGBT Digital Smart VRD Hot Start fits Below 3.2mm Welding rods

  • 【Advanced Control Mode】ARC Welder come with 110v-220v .is AC to DC mini inverter welder,it improves the efficiency of the welding process.it not....
  • 【Suitable for Whole Day Welding】The Arc welder fits belowe 3.2mm welding rods for whole day welding. It is applicable for welding all kinds of....
  • 【Easy To Operate】 The arc welder is so easy to use that it can be used by novice for practicing and for small welding operations to become a....
  • 【Easy to Carry】SIMDER ARC welders has a high quality design. Welding machine has small size,compact and light weight,easy carry and storage,high....
  • 【100% Money Back Guarantee】 The welder comes with 1 year warranty. If you’re not satisfied with your purchase, we’ll refund you- no questions....
Check Stock

DEKO 135Amp MIG/MMA Welder,DC Inverter Digital Welding Machine,110V Welder Machine with Wire Brush,Earthing Cable,Electrode Holder,Welding Gun,Digital Display Meter

  • 【POWERFUL&lIGHT WEIGHT】The 135Amp powerful MIG welder is capable of welding various metals, and the machine's welding properties are optimum with....
  • 【MULTI-FUNCTIONAL】The spot welder is suitable for a range of different purposes and the possibility to use a long extension cord eases operation....
  • 【IGBT Technology】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The....
  • 【SAFTY】The welding gun has an overheating protector which prevents operation when the machine is overheated. The stick welder is also protected....
  • 【EASY-TO-USE】The welders are amazingly easy to use. Suitable for home use，and it was simple to set up and start welding. You could literally....
Check Stock

LDHTHOPI MIG Welder, 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder

  • ...ed with function switching, voltage control knob and wire speed adjustment knob. With synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. And the smart digital display makes the operation easier for you..
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-160A. Duty cycle: 45%-160A at 40 °C. It adopts the advanced IGBT inverter technology with excellent arc stability. Suitable for welding carbon steel, iron, stainless steel, and other metals. Machine with current display can read the current and voltage. The MIG mode can select flux cored welding wire in 0.024"(0.8mm) and 0.03'(0.9mm), ARC(Stick/MMA) mode fits rods..
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The welders will automatically shut down when overheated and overload. Also machine energy-saving and Fan cooling system will works when needed, reduce the dust into machine also provide long life using. What‘s more, It is protected against splashing water, with a protection level of IP21, which has good water resistance..
Check Stock