TiVo Authorized MoCA/Point of Entry (PoE) Filter
- RF Pass Band: 5-1002MHZ RF Stop Band: 1125-1525MHz Band Rejection: 1125-1525MHz >5dB.
- Insertion Loss: PASSBAND 5-42MHz 42-550MHz 550-1002MHz STOPBAND 35dB.
- Return Loss: 5-1002MHz 15-550MHz 550-1002MHz 1125-1525MHz 100dB Group Delay: 5-1002MHz (3.58MHz) .
Check StockRockvilIe RWM1203VH Wireless (2) Handheld Microphones 4 Church Sound Systems
- ... eliminates unwanted distortion, Transmitter automatically links to receiver for ease of use, Use two handheld mics at once, Individual microphone volume controls, Low power consumption for longer battery life, System comes in 4 different frequency options. You can request a specific one in the notes A. 255.1/227.1 MHZ, B. 224.9/256.9 MHZ, C. 228.9/253.4 MHZ, D. 230.8/255.8 MHZ.
- Specifications of RWM1203VH: System: Operating Range: 150 feet or more, Channel: Two Channel, Frequency Range: 210MHz - 270MHz, Frequency Response: 40Hz-18KHz, S/N.:>103dB (1KHz-A), Operating Temp: 14°F – 122°F, Oscillation Mode: Quartz Crystal, Frequency Stability: ±0.005%, Harmonic Radiation :< 63dBm.
- RF Output Power: 10mW, Power Voltage: AC110V- 60Hz, Mic Battery: AA x 2, Receiver: Sensitivity: (S/N=30dB) >2mV, Audio Output Impedance: 600O, Audio Output Level.: 0-0.5V, Power Supply: AC110V 60Hz, Current Consumption: =50mA, Audio Out Connector: 1/4" unbalanced, Transmitter: Frequency Stability: ±0.005%, RF Output Power: =10mW.
- Modulation Mode: Maximum Deviation Range: ±50KHz, Microphone Mode: Fixed, Power Supply: AA/1.5V×2, C....
Check StockRockville RWM1203VH VHF Wireless Dual Handheld Microphone System/Digital Display
- Transmitter automatically links to receiver for ease of use. Use two handheld mics at once. Individual microphone volume controls. Low power consumption for longer battery life..
- System comes in 4 different frequency options. You can request a specific one in the notes, A. 255. 1/227. 1 MHZ , B. 224. 9/256. 9 MHZ, C. 228. 9/253. 4 MHZ, D. 230. 8/255. 8 MHZ.
- Operating Range: 150 feet or more. Channel: Two Channel. Frequency Range: 210MHz - 270MHz. Frequency Response: 40Hz-18KHz. S/N. : 003e103dB (1KHz-A)..
- Operating Temp: 14° F 122° F. Oscillation Mode: Quartz Crystal. Frequency Stability: ± 0. 005%. Modulation Mode: VHF. Harmonic Radiation : 003c 63dBm..
- RF Output Power: 10mW. Power Voltage: AC110V- 60Hz. Mic Battery: AA x 2. Sensitivity: (S/N=30dB) 003e2mV. Audio Output Impedance: 600Ω . Audio Output Level. : 0-0. 5V..
- Power Supply: AC110V 60Hz. Current Consumption: ≤ 50mA. Audio Out Connector: 1/4" unbalanced. Transmitter: Frequency Stability: ± 0. 005%. RF Output Power: ≤ 10mW..
- Modulation Mode: VHF. Maximum Deviation Range: ± 50KHz. Microphone Mode: Fixed. Power Supply: AA/1. 5V× 2. Current Consumption: ≤ 35mA..
Check StockFrequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz
- ...olation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
- POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
- EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
- APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency shift detection and other applications..
- FEATURE-- The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive..
Check StockBTECH Mini UV-25X4 25 Watt Tri-Band Base, Mobile Radio: VHF, 1.25M, UHF Amateur (Ham)
- ...Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501+220.
- Frequency Range: 144-148MHz (VHF), 222-225MHz (1.25M), 420-450MHz (UHF).
- Broad (Wide) / Narrowband (Narrow) Selectable.
- Recommended Accessories: Pair UV-25X4 with the Nagoya TB-320A Antenna (and RB-50 Magnetic Mount) for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
- Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used..
- Tribander Mobile Radio Kit Includes: BTECH UV-25X4, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Radio & Mic Brackets, Mounting Hardware, and User Guide.
Check StockDpg-200 Vacuum Transducer with
- -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
- Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
- 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
- Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
- Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock2PCS 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier Broadband Module Receiver for Signal Generator
- 0.1-2000MHz RF Wide Band Amplifier ;Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf....
- High Gain Low Noise LNA Amplifier; This product with wide frequency range, high gain, low noise figure.
- It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers..
Check StockMixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver
- Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
- 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
- Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
- -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
- Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check StockPower Acoustik HP900S POWER ACCOUSTIC SWIVEL 2CH WRLESS HDPH
- Power Acoustik HP-900S Swivel Ear Pad 2-Channel RF 900 Mhz Wireless Headphones.
- 2-Channel, 900 Mhz Wireless Headphones With Swivel Ear Pads.
Check StockRockville RWM1202VH VHF Wireless Dual HandHeld Microphone System/Metal Receiver
- ...ndividual microphone volume controls. Rugged metal housing. Comfortable ergonomic composite microphone construction. Low power consumption for longer battery life..
- System: Operating Range: 100´-200´(indoor), 65´-165´(outdoor). Channel: Two Channel. Frequency Range: 170MHz - 260MHz. Frequency Response: 80MHz-12000MHz. Frequency Width: 32Mhz. Dynamic Range: 110dB. Operating Temp: 14°F – 122°F. Oscillation Mode: Quartz Crystal. Frequency Stability: ±0.005%. Modulation Mode: VHF.Frequency Response: 80Hz – 8 KHz (±3 dB). Harmonic Radiation :< 63dBm. S/N: 60dB. RF Output Power: 10mW. Power Voltage: AC110V/ 220V - 50/60Hz..
- Mic Battery: AA x 2. Receiver:. Sensitivity: (S/N=30dB) >2mV. De-Emphasis: 50µS. Audio Output Impedance: 600Ω. Audio Output Level.: 0-0.5V. Power Supply: AC110V /220V 50/60Hz. Current Consumption: ≤50mA. Audio Out Connector: 1/4˝ unbalanced. Transmitter:. Frequency Stability: ±0.005%. RF Output Power: ≤30mW. Modulation Mode: VHF. Maximum Deviation Range: ±50KHz. Microphone Mode: Fixed. Pre-Emphasis: 50µS. Power Supply: AA/1.5V×2. Current Consumption: ≤35mA..
Check Stock1M-8G RF Power Meter Power Attenuation Set Digital Display Signal Strength Module Radio Frequency Power Meter
- Large Range: The measuring power range of this RF power meter is -60~-5 dBm (External RF attenuator can be extended to 100dBm), and the frequency range is up to 8000MHz..
- Specific Feature: The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
- Clear Display: This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
- Standard Structure: The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
- Quality Assurance: The RF power meter has been inspected many times before it leaves the factory to confirm the quality..
Check StockRockville, 2 RWM1202VH VHF Wireless Dual Handheld Microphone System w/Mic Receiver v2
- ...metal housing , Comfortable ergonomic composite microphone construction, Low power consumption for longer battery life.
- Specifications of RWM1202VH: System: Operating Range: 100'-200'(indoor), 65'-165'(outdoor), Channel: Two Channel, Frequency Range: 170MHz - 260MHz, Frequency Response: 80MHz-12000MHz, Frequency Width: 32Mhz, Dynamic Range: 110dB, Operating Temp: 14°F – 122°F..
- Oscillation Mode: Quartz Crystal, Frequency Stability: 0. 005%, Modulation Mode: VHF, Frequency Response: 80Hz – 8 KHz (3 dB), Harmonic Radiation : < 63dBm, S/N: 60dB, RF Output Power: 10mW, Power Voltage: AC110V/ 220V - 50/60Hz, Mic Battery: 9V.
- Receiver: Sensitivity: (S/N=30dB) >2mV , De-Emphasis: 50µS , Audio Output Impedance: 600O , Audio Output Level. : 0-0. 5V , Power Supply: AC110V /220V 50/60Hz , Current Consumption: =50mA , Audio Out Connector: 1/4" unbalanced , Transmitter: Frequency Stability: 0. 005% , RF Output Power: =30mW , Modulation Mode: VHF , Maximum Deviation Range: 50KHz , Microphone Mode: Fixed , Pre-Emphasis: 50µS , Power Supply: AA/1. 5V×2 , Current Consumption: =35mA.
Check StockMirkit x Baofeng Radio UV-5R MK3X 5 Watt FCC Approved 2022 2100 mAh Li-ion Battery, Tri-Band Radio Mirkit Edition and Neck Strap Lanyard Mirkit Ham Radio Operator
- ...Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501+220.
- Frequency Range: 144-148MHz (VHF), 222-225MHz (1.25M), 420-450MHz (UHF).
- Broad (Wide) / Narrowband (Narrow) Selectable.
- Recommended Accessories: Pair UV-25X4 with the Nagoya TB-320A Antenna (and RB-50 Magnetic Mount) for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
- Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used..
- Tribander Mobile Radio Kit Includes: BTECH UV-25X4, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Radio & Mic Brackets, Mounting Hardware, and User Guide.
Check Stock