Categories

Best Ir Emitter

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

TNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check Stock

Gone in 60 Seconds

  • ➤Works with all 38-56kHz IR remote control and devices with an IR input port..
  • ➤Low current drive, low power consumption, long launch distance, small size installed..
  • ➤Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • ➤Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control ..
Check Stock

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
  • Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
  • Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
  • Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..
Check Stock

IR Emitter Extender Remote Control Transmitter 3.5mm to IR Extension Cable Triple Head Infrared Red Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (3 Head, 10FT)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Comes with adhesive backing sticks directly onto different devices.
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter).
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check Stock

TiVo 2 Head IR Emitter / Blaster

  • Polarity: Anode (Longer Part) | Cathode (Shorter Part).
  • Package Content: 50pcs x Infrared Emitter Diode.
  • Low heat, energy saving, low power consumption, long service life..
  • NOTE: IR Emitter ONLY, IR Reciever is NOT included..
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

uxcell IR Infrared Emitter Extension Cable 9.8ft Long 45 Degree Emission Angle 3.5mm Jack Dual Black Head 5pcs

  • Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Low current drive, low power consumption, long launch distance, small size installed..
  • Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..
Check Stock

uxcell IR Infrared Emitter Extension Cable 4.9ft Long 45 Degree Emission Angle 3.5mm Jack Single Red Head 2pcs

  • Works with all 38-56kHz IR remote control and devices with an IR input port..
  • Low current drive, low power consumption, long launch distance, small size installed..
  • Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
  • Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control..
Check Stock

IR Emitter Remote Control Extender Cable, 4 Heads 3.5mm Plug Infrared Red Transmitter Blaster Blink Eye IR Extending Cable for IR Repeater/TV/DVD/Bluray Player/Xbox One (4 Heads, 10FT)

  • PASSES IR communication: used with an IR repeater kit to control a device.
  •  Remote control ability to stretch to any room in the house.
  •  Self-adhesive back allows the spotlights to be attached to the IR eye by a device.
  • Quad heads allow you to control over several pieces of devices with only one IR output.
  •  For use with IR extender extension system, Xbox One, IR connector blocks and home automation controller.
  • The mini stick-on emitter includes a 10 m cable between the emitter heads and the mini-plug.
  • Can you through the existing IR controller, control A / V components such as amplifier, cable box, HD DVR, stereo receiver, SAT TV receiver, CD player, DVD player, BluRay player or other components By IR signal.
Check Stock

DEMAO ir Repeater Kit ，ir Extender ，Infrared Repeater System Kit Remote Controls Home Theater Out of Sight .Control 1 DMIR0106TA Ir Repearter Kit

  • ...l block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
  • 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..
Check Stock

ENSIGEAR IR Repeater Kit, ir repeater system，IR Remote Control Extender Remote ，Control 1 to 18Devices.IR Extender 100 Feet，20KHz-60KHz Dual Sensors Mini Receiver,Super compatibility

  • ...l block , sold separately, will also be required that the IR receiver will then plug into..
  • 3） Connection without having to install the software, simple and convenient for you to achieve Remote Control. This product allows you to control A/V equipment with your existing IR remote controller..
  • 4）Use Double IR Emitter x 6pcs，expandable up to 12.Use Triple IR Emitter x 6pcs，expandable up to 18. .Home theater devices kept in a closed cabinet or in another room with this IR Infrared Remote Control Extender Repeater System. Additional IR Emitters sold separately . It is compatible with almost all the IR electronic appliances in the market with its wide frequency range 20 KHz to 60KHz , especially works with SKY set-top box and Cisco DVD player ( support RCMM code ) ..
  • 5) PACKAGE INCLUDE: 1x IR Connecting Block, 4x IR Emitters , 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual..
Check Stock