1080P 1x8 HDMI Extender Splitter by Orei Multiple Over Single Cable CAT5e/6/7 Full HD with IR Remote EDID Management - Up to 400 Ft - Low Latency - Full Support, 1x8 HDMI Extender - 395 FT (HD-EX108)
- Distribute 1 HDMI source to 8 HDMI displays over LAN CAT5e/6/7 network cable simultaneously..
- Output 1080p signal upto long distance 400 Feet with Cat5e/6/7 cable and This product supports the Over IP function so that you can add multiple receivers by connecting it with a network switch as a mediator. It supports one to many connections (sold separately).
- Full IR Remote Control Input. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables that forward commands over a dedicated DDC Channel. It extends HDMI audio/video signals to synchronous output video display is as fluent as direct connection.
- surround sound up to 7.1-channel or stereo digital audio.
- Compatible with HDCP compliant devices & content.
- Lossless Transmission with Minimal Latency, Plug & Play Setup without any Software Installation. Compatible with CAT6/6a/7 Network Cables. The highest Resolution Supported is 1920×1080@60Hz, Ideal Solution for HDMI Exhibition, Video Conference, Meeting rooms and Bars,, ect..
- Includes: 1 x Transmitter, 8 x Receivers, 9 x Power Adapter, 1 x IR Blaster Cable, 8 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's Warranty.
- Compatible devices: Bars, Game Consoles, HDMI Source....
Check Stockgofanco 1080p 1x8 HDMI Extender Splitter Balun – Up to 395ft (120m), Direct Connection from Transmitter to Receivers Over CAT5e / CAT6 or Over IP via Gigabit Switch, IR Extension, 8port (HDbitT8Pv2)
- ✔ HDMI EXTENDER SPLITTER KIT – Includes 1 Transmitter and 8 Receivers. Extend and distribute 1 HDMI source to 8 HDMI displays over CAT5e/6/7 up to 394ft simultaneously. *Important*: HDbitT8Pv2 (this kit, version 2.0) is not backward compatible with the previous version and its receivers (RX). If you live in an area with thunderstorms, plug this product's power adapter into a surge protector power strip to protect your device from voltage spikes.
- ✔ NETWORK DISTRIBUTION – Direct connection from Transmitter to Receivers or through IP network via 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Connect up to 30 Receivers per Transmitter. Additional Receivers (HDbitTv2-RX) are sold separately. Note that each VLAN can only accommodate 1 transmitter (TX). *Note: Don't use with home routers.
- ✔ VIDEO RESOLUTIONS & AUDIO – Supports up to 1080p.
- supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz.
- Auto adjustment for different cable lengths to produce the best video and audio experience.
- * Note: There’s a 250ms or less delay/latency due to data compression.
- Not recommended for real-time applications, such as PC....
Check StockBAFX Products (Infrared) IR Remote Control Extender or IR Repeater Kit - Control 1 to 8 Devices (Expandable to 12!)
- ... IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!.
- CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately..
Check StockBAFX Products - Extra IR Receiver for BAFX Products IR Infrared Repeater Kit / Remote Control Extender Kits
- IMPORTANT – MUST BE USED WITH BAFX PRODUCTS REPEATER KIT! This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so....
- EXPAND – Increase & Expand the reach of your current Single Zone BAFX Products IR Remote Control Extender kit! Add more receivers to more rooms to....
- FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote....
- COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of....
- WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to....
Check StockInfrared Resources External Universal IR Receiver Extender for VERIZON FIOS, SA/Cisco Explorer, Comcast, Samsung,PACE,Motorola,Arris,
- AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be..
- Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola, Arris, and DTA Set Top Boxes with active IR IN, EXT IR or IR Input as stated in the first bullet point section.
- WILL NOT WORK WITH: ( IR port reserved for future use) Scientific Atlanta Explorer HDC series 4200,4240,4250,8300,8240,8260 or other HDC models A/V Stereo Receivers, TVs or IR.
- REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323.
- 27 Years Experience Designing, Manufacturing And Supplying The Cable, Hospitality, and Retail Industry.
Check StockSewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black
- Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
- BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
- BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
- Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
- Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock2 Pack - DIRECTV RC66RX IR/RF Remote Control
- Compatible in IR mode with most DirecTV receivers.
- Built-in RF feature allows the remote to control the receiver without having to point it at the receiver.
- Receivers with compatible RF include R16, R22, H21, H22, H23, H24, HR21, HR22, HR23, HR24, HR34 and C31.
Check StockDIRECTV 2 Pack RC73 IR/RF Remote Control
- The RC73 Genie Remote replaces the RC71 and RC72 with better support for new TVs.
- Uses both infrared (IR) and radio frequency (RF) technology.
- Compatible with older DIRECTV receivers in IR mode only.
Check Stock3 DEVICE UNIVERSAL COMCAST XFINITY REMOTE CONTROL RNG DCX
- TV IR Control Database - TV Power, Volume, Mute.
Check StockCase of 40 - DIRECTV IR/RF Universal Remote Control RC66RX
- Replaces the RC71 RC72 RC73 with better support for new TVs.
- Uses both infrared (IR) and radio frequency (RF) technology.
- Compatible with older DIRECTV receivers in IR mode only.
- RF mode, works through walls, cabinets and floors.
Check Stock2 Pack - DIRECTV RC73 IR/RF Remote Control
- The RC73 Genie Remote replaces the RC71 and RC72 with better support for new TVs.
- Uses both infrared (IR) and radio frequency (RF) technology.
- Compatible with older DIRECTV receivers in IR mode only.
Check StockXfinity Comcast XR5 RF Remote Control X1 w/Backlight - Version V4-U
- TV IR Control Database - TV Power, Volume, Mute.
Check StockOREI 1x4 HDMI Extender Splitter Over Single Cable CAT6/7 1080P With IR Remote EDID Management - Up to 132 Ft - Loop Out - Low Latency Black
- Distribute 1 HDMI source to 4 HDMI displays over Network Cable Simultaneously..
- HDMI Transmitter is equipped with 4 Port CAT6 Output. And 1 Additional HDMI Output to connect to a local display or monitor..
- IR Remote Control. Supports 20~60Hz IR Pass Back, Control a DVD Player or Other HDMI Video Source from a Remote Location with the included IR cables....
- Plug & Play Setup without any Software Installation. Compatible with CAT6/6a/7 Network Cables. The highest Resolution Supported is 1920×[email protected],....
- Includes: 1 x Transmitter, 4 x Receivers, 4 x Power Adapter, 1 x IR Blaster Cable, 4 x IR Receiver Cables, 1 x User Manual. 1 Year OREI Manufacturer's....
Check Stock