Best Iron Chromium Cobalt Magnets
12Pack Hematite Rings Bulk Fidget Magnets Genuine Hemititate Rings Magnetic Field Therapy Products for Men Women Size 9 10 1112
- Sport Wristbands: Sabona Pro-Magnetic Sport Wristbands feature a combination of magnets and ion producing material.
- Sabona Sport Wristbands: The silicone wristband has a total of four samarium cobalt magnets, each positioned bio north facing the skin.
- Titanium Stretch Fabric: Wristbands also contain a titanium material which produces ions.
- Rust-Resistant Wristband: Sabona chooses Samarium Cobalt magnets for long term durability and rust resistant qualities making it a rust-resistant wristband.
- Sabona Athletic Bracelet Sizes: Sabona Sport Wristbands will stretch but snap back to the original size. You can wear them snug or loose, choose your size accordingly. The wristband sizes are Small/Medium (7.0”), Large (7.5”), and X-Large (8.0”).
Check StockYG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
- Four flutes produce a better finish than fewer flutes.
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Square nose end mills (also called square end) create sharp, unrounded cuts.
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockYG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockSabona Classic Copper Magnetic Wristband Copper Wristband Large 6.5” Brown
- Classic Copper Wristband: Sabona Classic Copper Magnetic Wristband is designed for comfort & manufactured to maintain its shape & quality appearance.....
- Magnetic Copper Wristband: Sabona chooses Samarium Cobalt magnets for long term durability and rust resistant qualities. Sabona Copper Wristbands are....
- Samarium Cobalt Magnet: The magnetic wristbands or cuff styles have a rust-proof samarium cobalt magnet in each tip. The plating is on the outside....
- Copper Bracelet Maintenance: Clean the green deposit under your Sabona Magnetic Classic Copper Wristband with a good jewelry cleaning cloth to keep....
- Sabona Copper Bracelet Sizes: To get the best fit, subtract ½" to ¾" from your wrist size to determine the size Sabona Copper Wristband you need.....
Check StockXFasten Adhesive Magnetic Tape Roll, 1-Inch X 6-Foot Double Sided Magnetic Tape for Classroom, Wall, Magnet Strip for Refrigerator, Magnetic Mounting Tape, Sticky Magnetic Strips with Adhesive Backing
- Heat and Moisture Resistant. Aside from your refrigerator and whiteboard, you can also use this thin magnetic tape outdoors because heat and even moisture won’t affect its adhesive strength. It’s time to create some magic on your porch!.
- Double Sided Magnetic Tape that Can Magnetize Itself. This magnetic tape roll works best either in direct contact with ferrous-based metals or in direct contact with itself. So, there’s a lot more you can do with this XFasten magnetic strip for refrigerators..
- Compatible with Ferrous-based Metals. Only ferrous-based metals such as iron, stainless steel, cobalt, nickel, and galvanized iron are attracted to magnets. Others, like brass, copper, zinc, and aluminum, are not attracted to magnets..
- Ideal for Do-it-Yourself Projects. These adhesive magnet strips are ideal for holding up recipes, personalized cards, DIY gifts, and other projects that both you and your children and friends will enjoy..
- Easy to Install. This magnetic tape with adhesive backing is super easy to install. Just remove the liner to expose the permanent adhesive, then adhere it to any surface that you want. No tricks are needed!.
Check StockYG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
- Four flutes produce a better finish than fewer flutes.
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check StockSTROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood
- 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
- 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
- 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
- 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
- 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check StockPertronix D186604 Flame-Thrower VW Type 1 Engine Plug and Play Non Vacuum Cast Electronic Distributor with Ignitor Technology
- All new lightweight cast aluminum housings.
- Tailored advance curve for optimal performance and driveability.
- Integrated Ignitor electronic ignition delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit which enables precise timing.
- High dielectric strength cap with brass terminals.
- Tailored advance curve for optimal performance and driveability. 2:1 improvement over points in current fall time for increased coil output.
Check StockTojiro Kitchen Knife F-801
- Size: total length 230mm (sword length 120mm).
- Material Material: blade portion: cobalt alloy steel, 13 chromium stainless steel, the base part: 18-8 stainless steel, handle: black laminated reinforced wood (ECO Wood).
Check StockJapanese Tojiro Canvas Knife Pocket F-359 Carry Case For Chef s Knives
- Size: total length 230mm (sword length 120mm).
- Material Material: blade portion: cobalt alloy steel, 13 chromium stainless steel, the base part: 18-8 stainless steel, handle: black laminated....
Check StockGrumbacher Transparent Watercolor Set, 24 Colors & Brush
- Vibrant, luminous transparent watercolors.
- Individual colors easily snap out for versatility and convenience.
- Durable plastic case protects paints in transit.
- Colors include: Lemon, Yellow, Indian Yellow, Orange, Vermilion, Permanent Red, Carmine, Violet, Ultramarine, Cobalt Blue, Prussian Blue, Turquoise Blue, Blue Green, French Green, Yellow Green, Green Oxide of Chromium, Raw Umber, Van Dyke Brown, Burnt Sienna, Indian Red, Yellow Ochre, Flesh Color, Payne's Gray, and Lamp Black.
Check StockHorseshoe Magnet Power ALNICO Magnets 2 Lb Pull Retrieving Magnet #370-1
- MAGNET HORSESHOE ALNICO 2 LB. POWER ALNICO MAGNET 370-1 from GENERAL TOOL This is a small size horseshoe magnet, made with industrial grade Alnico (Aluminum/Nickel/Cobalt) Magnets are built for heavy duty use and will not naturally demagnetize over time like other magnets. They are handy in a wide variety of applications and work settings. The horseshoe-shaped Power Alnico Magnet, small size but still has extraordinarily strong pull capacity of 2lb - 0.91 kilo approximately..
Check Stock