Categories

Best Irrigation Manifold

Senninger Pressure Regulator 25 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve - Landscape Grade High Performance

  • Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4″ outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system..
  • 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance..
  • Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance..
  • This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 – 7 GPM (114 – 1590 L/hr)..
  • Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation..
Check Stock

Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required

  • Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent backflow all with a single pre-assembled unit..
  • Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig..
  • Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately..
  • Don't settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is checked for accuracy and known worldwide for its reliable performance..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

PureSec Inline Shut Off Ball Valve 1/4 inch OD Tubing&Hose&Pipe Use Plastic Quick Connect Fittings for Water Purifier RODI System (Pack of 5)

  • ★WATER&FOOD USE MATERIALS: Our valves are made from safe, food grade materials.They are manifold and widely used for RO system,plumbing or irrigation System etc.
  • ★SIZE&TUBE COMPATIBLE WITH: 1/4 inch OD to 1/4 inch OD.
  • Fits standard 1/4 inch water line used on most osmosis reverse systems ( check your tube size carefully before order).
  • ★EASY INSTALLATION: New generation Non-Locking Clip technology offers an easy DIY installation without tools required, Just Push to Lock..
  • ★FUNCTION&QUALITY: Quick Connectors are used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality..
  • ★Notes: Our valves are reusable, it can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)..
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

CARPATHEN Drip Irrigation Kit for Potted Plants - Adjustable Premium Watering System for Patio Plants - Irrigation System for Hanging Baskets, Raised Garden Beds, Containers - Complete with Drip Emitters, Irrigation Tubing and Drip Connectors

  • BE A GARDENING MASTER WITH THE HELP OF OUR SUPERIOR AND COMPLETE DRIP IRRIGATION KIT: 8 Drip Irrigation Emitters Vortex + 35 ft flexible & durable 5/16” Irrigation Tubing + 35 ft 1/4" Drip Irrigation Tubing + 2 pcs 4 Way Tubing Splitter + 5 pcs 1/4" Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format..
  • CUT DOWN YOUR WATER BILL - Minimize the amount of water loss by watering the roots of the plants with the drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our garden watering system can be used as a raised bed irrigation system, as a plant watering system, as a container irrigation kit or as drip irrigation patio watering kit. Enjoy healthier plants with less cost and work!.
  • MAKE YOUR OWN GARDEN IRRIGATION SYSTEM KIT EASIER THAN EVER: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip line as the mainline. Branch off with the 1/4 drip line irrigation and connect the drip irrigation emitters. Stick the dr....
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

CARPATHEN Drip Irrigation Kit - Adjustable Premium Garden Watering System for Raised Garden Bed, Yard, Lawn or Indoor - Complete Irrigation System with Drip Emitters, 1/4 Tubing and Drip Connectors

  • Be a Gardening Master with the help of our superior and complete Drip Irrigation Kit: 10 Drip Irrigation Emitters Vortex + 20 Drip Emitters Spray + 50ft flexible & durable 5/16 irrigation tubing + 50ft 1/4 inch Drip Irrigation Tubing + 12 tubing coupler + 5 ¼ Tubing Tee Splitter + Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format..
  • Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with the garden drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our irigation system can be used for raised garden bed, as garden watering system for healthy vegetables, automatic watering system for potted plants, drip system for fruit trees, or as patio irrigation kit. Enjoy healthier plants with less cost and work.
  • Make your own garden irrigation system kit easier than ever: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip irrigation tubing as the mainline. Branch off with the 1/4 d....
Check Stock

HIRALIY 118FT Garden Watering System, Drip Irrigation Kits for Plants, New Quick-Connect Fittings, Blank Distribution Tubing, Saving Water Automatic Irrigation Equipment for Patio Lawn

  • [This Drip Irrigation System Kit] A 70-piece drip irrigation system kit contains 98FT 1/4" irrigation tubing (Branch)+20FT irrigation tubing (Mainline), 2Pcs 6-way connector, 28Pcs adjustable sprinkler heads (Including quick connect tee), 1Pcs water Connector, 28Pcs Support rod, 1Pcs 15mm end plug, 8Pcs 1/4" end plug, without you having to buy any more tools..
  • [New Garden Watering System] The new garden watering system is designed with a 6-Way connector, using drip irrigation tubing as the mainline. Branch off with the 1/4" drip irrigation tubing and connect the drip irrigation emitters. Effectively increases the water pressure, perfectly solves the problem of lack of water at the end of the irrigation system.
  • [Adjustable Drip Irrigation Kit] Every nozzle could be adjusted individually (to stop, to micro drip, to spray), and it can meet the water demand of different plants at one time. The irrigation sprinkler heads are detachable and easy to clean, so you don’t worry about clogging. What's more, the drip emitters have a support stake, convenient for placing in soil..
Check Stock

Fear

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Fieldpiece SM380V SMAN manifolds, Black

  • Toughest, most advanced digital refrigerant manifold on the market.
Check Stock

Fieldpiece Job Link

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Life Is Predictable in Retrospect

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock