Categories

Best Iso Groove Fineness Gauge

BYNFORD HARDWOOD FLOORING STAPLER NAILER For conventional 5/8 & under T&G flooring AND SHAW type flooring groove side stapling .

  • Uses standard 18 gauge narrow crown staples AND 18 gauge brad nails up to 1-9/16".
  • Shoe easily adjusts to multiple floor thicknesses.
  • Designed for floors from 1/4" - 9/16" (or 3/4" in limited applications).
  • New shoe designs permits use on Shaw type groove side fastening (floor with longer lower lip on groove side).
  • Adjustable depth control for limited countersink. INCLUDES BM PLASTIC CASE.
Check Stock

Telescoping Gauge Gage Set Tools 6 Pcs 5/16'' - 6'' Range Micrometer Precision T-Bore Hole Gauge

  • Multispecification measurement range, 6 piece Telescoping Gage Set, can detect hole (or slot) ID 5/16 "-6"（8mm-150mm）.
  • Telescoping Gage Set INCLUBE:A - 8 To 12.7 mm 5/16 "To 1/2".
  • The Telescoping Gage Set is a stainless steel material that prevents rust and extends the life of the Telescoping Gage Set, a satin chrome plated surface that includes the case, contact points of hardened tool steel, Telescoping spring, with a knurled locking knob and a knurled holding area..
  • Easy-to-adjust to allow the most pinhole gauge on the retractable gauge to enter, groove and groove up to 6 inches deep..
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Freeman PDX50C Lightweight Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2\ Flooring Nailer and Stapler Ergonomic and Lightweight Nail Gun for Tongue and Groove Hardwood Flooring

  • Nailed It: This Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler uses 16 gauge T-cleats and L-cleats, and 15.5 gauge flooring staples. It comes with interchangeable base plates that make it perfect for both solid wood tongue and groove or engineered flooring from 1/2" to 3/4"..
  • Pro Design: This durable nailer features an anodized aluminum magazine, no mar protection plate and self leveling front foot. It's ideal for solid wood tongue and groove flooring from 1/2" to 23/32" in thickness. A lightweight fiberglass handle mallet is included..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

AC Compressor & A/C Kit For Ford F-150 F150 V8 1999 2000 2001 2002 2003 w/ 8-Groove Clutch Pulley - BuyAutoParts 60-80243RK New

  • Engineered for superior durability, backed by industry-leading 2-year, unlimited-mileage warranty.
  • Guaranteed Exact Fit for easy installation.
  • 100% BRAND NEW, premium ISO/TS 16949 quality - no core deposit or return required!.
  • Kit includes compressor with clutch, drier filter, expansion valve, oil and O-ring seals.
  • Fits 1999-2003 Ford F-150 V8 with an 8-groove clutch pulley, plus 2004 F-150 Heritage V8 with the same 8-groove pulley.
Check Stock

AC Compressor & A/C Repair Kit For Ford F150 F-150 V8 2002 2003 w/ 6-Groove Clutch Pulley - BuyAutoParts 60-80247RK New

  • Engineered for superior durability, backed by industry-leading 2-year, unlimited-mileage warranty.
  • Guaranteed Exact Fit for easy installation.
  • 100% BRAND NEW, premium ISO/TS 16949 quality - no core deposit or return required.
  • Kit includes compressor with clutch, drier filter, expansion valve, oil and O-ring seals.
  • Fits 2002 and 2003 Ford F150 V8 with a 6-groove AC clutch pulley - some models had an 8-groove clutch to use with an 8-rib belt, so please verify....
Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

VEVOR Soybean Grinder Commercial Grinding Machine for Spices 3000W Corn Mill Grinder 50-60 KG/H Stainless Steel Corn Grinder Industrial Flour Milling Machine for Pepper Soybean Peanut Herbs Grains

  • ...e grinding more efficient compared with the 2200 W grinder. Furthermore, our grain grinder mill is built with two robust grinding discs, three stainless steel scrapers, and a rotation axle, which rotates and crushes materials into powder. It comes with four discs totally for easy replacement..
  • Adjustable Powder Fineness: This electric grain mill is easy to operate with two buttons for starting and stopping the machine. Besides, a fineness knob allows you to adjust the powder fineness from 50 to 200 mesh to meet different materials. Rotate the fineness knob counterclockwise to get roughly powder and then turn the fineness knob clockwise to get the required fineness powder, which will less wear the grinding discs..
  • Considerable & Exquisite Details: A food-grade stainless steel hopper with a large hold capacity increases work efficiency. It is easy to clean and load. And there is a blanking valve for feeding volume and speed control. What’s more, to ensure the hygiene of powder, the outlet is designed with a strong magnetic device that can adsorb the iron chipping produced. The overload protection will spring up automatically when the grinder is overloaded, thus protecting the motor from damage..
  • Various Applications: The electric corn grain machine....
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Antioch Home Bathroom Hand Towels, Hotel Quality & Fluffy & Absorbent & Soft & Fast Drying Turkish Hand Towels for Bathroom, 100% Cotton Turkish Hand Towel Set - [ 4 Pack – 16 x 28 inches ] - Grey

  • 【High-quality materials】Chenille fabric is a fabric made of short fibers or filaments of different fineness and strength by twisting. It's down-filled, soft to the touch, thick and light in texture..
  • 【High-quality materials】Chenille fabric is a fabric made of short fibers or filaments of different fineness and strength by twisting. It's down-filled, soft to the touch, thick and light in texture.c.
  • 【Easy cleaning】It is recommended to wash by hand, wash with cold water, and dry naturally after cleaning..
Check Stock

Precision Miter Gauge, Kolvoii Table Saw Miter Gauge with 120 Degree Angled Ends, Craftsman Woodworking Tools for Table Saw, Band Saw, Router Table

  • ...s 60 angle adjustable, ideal for crosscutting wood at a specific angle. once the gauge is set, the precise cross cutting angles that you have even more control over the workpiece you are cutting. the fence comes with a flip stop that makes repetitive cuts a breeze..
  • 【Simple Operation】 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment).
  • The slide bar has a locking washer that fits snugly into the track with a matching groove.
  • Simply slide the flip stop to the exact position you need it to be, lock it in place and you’re ready to go..
  • 【Premium Material】 This woodworking tool is made of alluminium alloy. Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. Laser engraved scale marking technology is friction-resistance to ensure accuracy..
  • 【100% Satisfaction Guarantee】 We will make every effort to provide customers with high quality products and satisfactory service. If you have any question before or after purchase, please email us at any time, we will solve it in your favor..
Check Stock