Categories

Best Isolated Power Supplies

White Lightning (I Mean Moonshine) [feat. The J.B.'s]

  • - Enclosed, non-isolated, Adjustable transformer, with Output Volt Meter.On/Off Power Switch(Lighted),5A fuse & power cord..
  • - Over-voltage protection, the use of more security.Contact voltage transformer, wide voltage range (0-130V).
  • - Built-in copper coil, material quality, more secure and durable.High efficiency and with no waveform distortion..
  • - Suit for home coffee roasting,Motor Speed control,Label Printing Machine,EE Labs,Test for Railroad Switching, Power Supplies, Satellite,Equipment,Telecommunication Equipment..
  • Please note that most device have surge (when first turn on) much higher than operating amp rating. E.g, motor with 5 amp rating may have over 10 amp surge, and you will need 10 amp transformer..
Check Stock

Caline CP-08 Guitar Pedal Board Power Supply 10 Isolated Output 9V 12V 18V Effect Pedals with Isolated Short Circuit / Overcurrent Protection

  • Fully Isolated Power Powers for 9V, 12V or 18V PEDAL.
  • Stable Current:10 isolated output with isolated short cricuit and overcurrent protected.
  • Aluminium alloy housing material makes the host stable and light(the host only 1.5kg), freely for player to carry it everywhere.
  • Bright red LED for pedal board lighting in the dark and blinks when instantaneous overcurrent occurs.
Check Stock

JOYO D-SEED-II Multi Stereo Delay Pedal with Isolated Guitar Effect Pedal Power Supply

  • Bundle includes: JOYO D-SEED-II Multi Stereo Delay Pedal & Isolated Guitar Pedal Power Supply. This bundle contains 2 items (may be shipped separately)..
  • D-SEED-II: Stereo input and Stereo output, 8 delay modes, supports a maximum of 2000ms delay time..
  • Uses a high quality R transformer with highly filtered and regulated, provide a clean and transparent sound..
  • Much power supply safety: isolated 8 output jacks, with truly isolated short circuit and overcurrent protection..
  • 1 jack 100mA with switchable voltage 12V / 18V..
Check Stock

Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter with Original FT232RL Embedded Protection Circuits and Aluminium Alloy Enclosure for Industrial Control Equipments

  • This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power....
  • The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and....
  • Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering....
  • Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal.
  • High quality USB-B and RS232 connectors smoothly plug/pull.
Check Stock

Power Acoustik PWM-16 Pre-Amp Equalizer, Standard Packaging

  • 2 selectable balanced inputs & front panel aux input.
Check Stock

CIOKS DC10 Link 9V, 12V, 24V DC Universal Power Supply with 10 Isolated Outputs and 17 Flex Cables for Effect Pedals - Compatible with Radial Tonebones, EHX, Line 6 M9, Blackstar Overdrives, and more

  • EXPANDABLE POWER SOLUTION - With the CIOKS DC10 Link, you can connect two or more power supplies using a single main power cord. Customize your power bank to match your rig's specific needs..
  • CONFIGURABLE POWER OUTPUTS - The professional "Link" power supply offers isolated outlets you can set from 9V to 24V. It delivers a total of clean 2800mA power current..
  • COMES WITH AN mA-METER - The advance mA-meter measures all connected pedal's current draw and lets you know which correct outlet to use without wasting any power..
  • REDUCES HUMS AND NOISE - The onboard toroidal transformer protects your audio signal from causing unwanted noise thanks to the added electromagnetic field shield..
  • ENSURES SMOOTH OPERATION - All outputs have short circuit protection so if one outlet overloads, its respective LED indicator will turn off, but will not affect the other pedals..
Check Stock

Donner DP-1 Guitar Power Supply with DP-Z 9V Guitar Pedal Power Supply 11 Isolated DC Output with USB Port for 9V/12V/18V Effect Pedal DC 18v 2000m Input

  • 10 ISOLATED OUTPUTS:Donner DP-1 9V Guitar Pedal Power Supply has 10 outputs ,which includes 7 ways 9V 100mA, 1 way 9V 500mA, 1 way 12V 100mA, 1 way 18V 100mA..
  • NOISE REDUCTION CIRCUIT DESIGN：Donner Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during use..
  • 【Super Power Adapter】Donner DP-Z 9V Guitar Pedal Power Supply equips with superpower adapter: DC 18v 2000mA ，this powerful input ensures that every output is in the best possible state..
  • 【10 Isolated Outputs + 1 USB charge port 】 Donner DP-Z 9V Guitar Pedal Power Supply has 10 outputs ,which includes 4 x 9V 100mA, 3 x 9V 300mA, 1 x 9V 500mA, 1 x 9V/12V 500mA, 1 x 18V 300mA with 1 x DC 18V input, 1 x USB charge port. 10 Isolated Output ,5v 1000 mA USB charge port Meet the power demand of Mobile devices ..
  • 【Noise Reduction Circuit Design】Donner Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during u....
Check Stock

Donner Compressor Pedal Ultimate Comp Guitar Effect Pedal with DP-1 Guitar Power Supply

  • [Compressor Pedal] TLevel ,Comp,Tone knobs allow you to dial in your desired sound.Two modes:Normal and Treble compression..
  • [Compressor Pedal] Our circuit has been optimized according to the characteristics of the electric guitar and performs outstandingly over the spectrum of different playing styles..
  • [Compressor Pedal] The compressed tone is round and smooth,full of musicality, and perfectly retains the original guitar tone..
  • [Power Supply] 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected. Power: AC 100v-240V Input: DC 18V，Powers For 9V、12V or 18V PEDAL.
  • [Power Supply] Includes link Moukey power cables (10pcs).
Check Stock

Signal Isolator, Signal Conditioner Current 4-20mA for Transmitter for Isolated Power Distribution Power Supply

  • High quality signal isolator, stable performance, durable and reliable..
  • Strong input signal processing ability, able to accept and process thermocouple, thermal resistance, frequency and other signals.
  • Have the advantage of high precision,high linearity and strong anti-interference..
  • The input, output and power are isolated from each other by adopting highly efficient magnetoelectric isolation technology interiorly..
  • This signal isolator provides isolated power distribution power supply for transmitter,meanwhile it isolates and converts the current signal to control room..
Check Stock

Donner Overdrive Guitar Effect Pedal, Blues Drive Vintage Overdrive with DP-1 Guitar Power Supply

  • [Overdrive Pedal] Combining iconic vintage tube overdrive sound with wide dynamic range and flflexible controls, this pedal gives you a wide tonal range from smooth whispers to searing leads..
  • [Overdrive Pedal] Feature an easy-to-use three-knob tone control: LEVEL (output volume), TONE (brightness) and GAIN (overdrive amount) for using in different scenarios. Each knob gives you a wide control range..
  • [Overdrive Pedal] Offer a the 2-way selector for choosing from two sound types for satisfying different musicians: Hot: Providing a louder, tightened sound Warm: The classic TS overdrive sound replica..
  • [Power Supply] 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected. Power: AC 100v-240V Input: DC 18V，Powers For 9V、12V or 18V PEDAL.
  • [Power Supply] Includes link Moukey power cables (10pcs).
Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock

Panamax M4315-PRO Power Conditioner/Surge Protector 15 Amp

  • Panamax M4315-PRO bluebolt outlet 15 amp power MANAGEMENT with control and energy monitoring.
  • Linear Filtration with 3 isolated lift filter banks plus 1 isolated filter bank for high current devices.
Check Stock

Taidacent Ohm Meter Resistance Tester Ohmmeter Digital DC Resistance Measuring Instrument Fixture Resistance Measure Panel Meter (200K Ohm, DC5V with Cover)

  • Power supply: DC5V/DC12V optional (current consumption is less than 50mA).
  • This ohmmeter is a common ground instrument, non-isolated, it is recommended to use a separate power supply, that is, the power supply is not related to the signal.
  • The resistance meter cannot be measured with electricity, otherwise the meter will be burnt out.
  • Select a suitable range, if the range is selected too much, the small resistance cannot be recognized or the measurement is inaccurate.
  • The meter head is a common ground instrument (that is, the negative pole of the power supply and the negative pole of the signal are connected), it is recommended to use a separate, independent, and isolated power supply (that is, the power supply and the measurement terminal are not related).
Check Stock