Replacement Filters for Mini Milk Strainer
- Fits the stainless steel mini strainer by The Dairy Shoppe and others.
Check StockElima-Draft Commercial 1-Way Air Deflector Vent Cover for 24 x 24 Diffusers
- Four Pack - Magnetic Vent Covers (if a regular magnet sticks to your vents, these will too! They're very strong! -- Don't buy for wooden, cast iron,....
- Creates Air Tight Seal for Ceiling Vents, Wall Vents, and Floor Vents.
- Extremely Strong - Uses Anisotropic Magnet Technology (Stronger than Isotropic Magnets).
- 2mm thick (4x thicker than .5mm Vent Covers).
- 12" x 5.5" (Can be cut to size) Fits Most Vents (Steel Registers) NOT for use with aluminum, cast iron, painted, plastic or wood registers.
Check StockMagnetic Marker Holder for Whiteboards / Fridge / Refrigerator Magnetic Pen Holder Dry Erase Tray with Anisotropic Magnet Backing,Black
- Extra Strong Anisotropic Magnet Backing, compared to isotropic magnet, the anisotropic magnet with higher magnetic properties..
- With Extra Strong Anisotropic Magnet Pad, can be attached to any magnetic surface without falling..
- Made of high-quality hard plastic, non-toxic, durable and long-lasting..
- Intimate design, you can adjust the space of the compartment as needed by moving the partition..
- Widely applicable to magnetic whiteboards, refrigerator, locker, office cabinet. Sticks to any flat metal surface..
Check StockStrong Magnetic Dry Erase Marker Holder for Whiteboards/Fridge/Refrigerator/School Magnetic Pen Holder Pen Organizer with Anisotropic Magnet Pad Grey
- Extra Strong Anisotropic Magnet Backing, compared to isotropic magnet, the anisotropic magnet with higher magnetic properties..
- Can be tightly attached to any magnetic surface and metal surface without falling. BUT IT DOES NOT fit for glass whiteboards.
- Made of prime hard plastic, non-toxic, durable and long-lasting..
- Large capacity with removable compartment dividers..
- Widely applicable to magnetic whiteboards, refrigerator, locker, office cabinet..
Check StockVIETRI Papersoft Napkin Collection Italian Luxury Paper Napkin and Guest Towel (Dinner Napkins, Capri Linen)
- Includes: pack of 50 luxury disposable napkins. When folded, Papersoft Dinner Napkins measure 8 inches long by 8 inches wide. When unfolded the napkin is 16 inches long by 16 inches wide..
- Handcrafted in Italy: beautiful Linen striped pattern. Each piece is soft to the touch and highly absorbent. Papersoft Napkins are made in Italy of a fibrous material called spunlace. It is a nonwoven fabric with isotropic properties giving the same strength in any direction..
- Luxury Design: Unique high-quality designs with colors and patterns for all occasions: holidays, hosting, entertaining, parties and more..
- Papersoft Collection by VIETRI is a collection of luxury disposable napkins that comes in all kinds of colors including bianco, capri blue striped, capri green striped, capri light gray striped, capri red striped, capri lined striped, green dot, blue dot, red dot, and Christmas tree. The collection also comes in dinner napkin sized and guest towel size..
- Crisp and elegant linen or cream colored stripes on a luxury napkin..
Check StockVeloTech Vent Cover 4-Pack for Steel Registers - 12 X 5.5 2MM Extra Thick UltraStrong Magnet to Seal Vents & Save Energy Magnetic Vent Covers for Home Floor Vent Cover or Ceiling Air Vent Covers
- Four Pack - Magnetic Vent Covers (if a regular magnet sticks to your vents, these will too! They're very strong! -- Don't buy for wooden, cast iron,....
- Creates Air Tight Seal for Ceiling Vents, Wall Vents, and Floor Vents.
- Extremely Strong - Uses Anisotropic Magnet Technology (Stronger than Isotropic Magnets).
- 2mm thick (4x thicker than .5mm Vent Covers).
- 12" x 5.5" (Can be cut to size) Fits Most Vents (Steel Registers) NOT for use with aluminum, cast iron, painted, plastic or wood registers.
Check StockGem Refractometer, RHG181 1.30-1.81 Jewelry Professional High Accuracy Gemstone ldentification Portable Gemological Gemelogy Refractometer with Electric Torch, Reflective Index Fluid for Gemologists
- Refractive Index is one of the most important optical parameters used to identify and authenticate polished precious and semi-precious gemstones..
- Gemological (Gemstone) Refractometer is your primary and most powerful tool in gemstone identification. As with a typical critical angle refractometer, it will measure the Refractive Index of faceted stones..
- This Gemological refractometer is a low cost, lightweight measuring instrument used by jewellers and traders of gemstones to measure polished stones over a refractive index range of 1.30 to 1.81 RI..
- The instrument can also be used to identify whether a particular stone is Isotropic or Anistropic (uniaxial or biaxial)..
- In fact, you can also use this tool to measure R.I. for many minerals in crystal form as long as the crystals have a flat and polished face..
Check StockFuel Injection Idle Air Control Valve cciyu Premium Quality Idle Air Control Valve Fit for 1998 1999 2000 2001 Ford Fiesta, 2000 2001 2002 2003 2004 2005 Ford Focus with 556025 of 1pcs
- COMPATIBILITY-- cciyu Idle Air Control Valve assembly is compatible with 1998 1999 2000 2001 for Ford Fiesta, 2000 2001 2002 2003 2004 2005 for Ford Focus.
- COMPLETE SET OF CONVENIENCES-- Throttle body is included in the package are 100% new products that have been tested to meet or exceed OEM specifications. You can buy with confidence..
- HIGH STRENGTH -- Our high strength stepping motors produce the highest output torques and shielded ball bearing in the motor resists the environmental contaminates for an extended service life Environmentally.
- OPERATING ACCURATELY -- Our idle air controls (IAC) use a polymer blended, isotropic neodymium/iron/boron magnet to provide accurate control of the pintle and airflow ensuring accurate operation..
- NOTE -- If the engine cooling water temperature is lower than the airflow should be felt, if the airflow is not felt, replace the idle speed control valve and check again.PLEASE CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING.
Check StockMagnetic Marker Holder, Self Adhesive Wall Mount Magnetic Dry Erase Marker Holder For Dry Erase Whiteboard, Magnetic Pencil HolderRefrigerator,Locker Accessories, For Home Office School (1Pack)
- 【Powerful Magnet】Extra Strong Anisotropic Magnet Backing, compared to isotropic magnet, the anisotropic magnet with higher magnetic properties. Please Note: Not recommended for some dusty or damp wet wall surface..
- 【Premium Quality】 Made of high-quality ABS material with magnetic back, durable and sturdy, stable for long lasting time use. Eco-friendly, no-toxic and no-smell, safe to use..
- 【Widely Application】 whiteboard eraser and magnetic pen holder are suitable for classrooms, homes, offices and other places, can be applied to dry erase boards, refrigerators, lockers, metal cabinets, etc..
- The magnetic case can hold rulers, pens, memo pads and more.
- 【Size】 The dimensions of this magnetic pen cup are approx 4.72x 2.2 x 3.94 inches. Its enough space could organize more objects..
- 【stay organized Keep things organized】 stored and handy with our magnetic holder for dry erase markers. Perfect for organising Our magnetic pen holder for dry erase board is easy to be clean..
Check StockGimars Anisotropic Flexible Magnetic Strip Tape with Strong Self Adhesive, 1 Inch x 10 Feet Stick On Magnet Roll for Photo, Fridge and Dry Erase Board, Craft and DIY Projects
- 635G anisotropic magnet stronger than others for light duty use – 2mm thickness, 635G weight and anisotropic (not Isotropic). this magnet tape roll is stronger than the same Version Of others. Perfect for small Items such as metal screws, clips, paper clip, nail clippers, dry erase boards, memo notes, Calculator and bills On the refrigerator, etc Perfect for any DIY projects.
- Premium imported 300Lse adhesives sticking strong on Surface – This magnetic strip has one side sticky, the other side flexible magnetic. Please be aware: the adhesive is very strong. Be sure the location before sticking on painted wall, door, etc. Remove them with heat if needed. Ideal for education, Science, kitchen, office, building, garage, creativity and craft use..
- Flexible and easy to cut with scissor/ laying flat on plastic, metal, tiles surface – This is flexible magnets, easy to cut into different sizes of squares, strips, tapes for different needs for laminated art, classroom magnets, garage door seals, magnets for cabinet doors, etc. This is not metal magnet or heavy duty magnet.Do not use for heavy duty, like Pot lid, security cameras..
- Wider size of 1 inch x 10 feet for versatile usage and creativity – you could cut and place the self adhesive magnet st....
Check StockPorter Cable 690/691/693 Router Router Replacement SUB BASE # 875807
- Genuine, OEM Porter Cable Replacement Part.
- Porter Cable replacement brush cap, part number 803483.
- Compatible with: 6302 Type 1, 6302 Type 2, 6302 Type 3, 6302 Type 4, 690 Type ALL TYPES, 6902 Type 1, 6902 Type 2, 6902 Type 3, 6902 Type 4, 6902 Type 5, 6902 Type 6, 6902 Type 7, 6902 Type 8, 6902VS Type 1, 6902VS Type 8, 690LR Type 1, 690LR Type 2, 690LR Type 8, 690LRP Type 1, 690LRVS Type 1, 690LRVS Type 8, 691 Type 1, 691 Type 2, 691 Type 3, 691 Type 4, 691 Type 5, 691 Type 6, 691 Type 7, 691 Type 8, 691 Type 9, 6912 Type 1, 6912 Type 2, 6912 Type 3, 6912 Type 4, 6912 Type 5, 6912 Type 6, 69.
- Measures approximately 0.80 X 0.75 X 0.45 inches.
Check StockPORTER-CABLE Drywall Sander Pad & Hook and Loop Discs, 220 Grit, 5-Pack (79220-5)
- Genuine, OEM Porter Cable Replacement Part.
- Porter Cable replacement shoe assembly, part number 908909.
- Compatible with: 360 Type 5, 360 Type 5, 360 Type 5, 360 Type 6, 360 Type 6, 360 Type 6, 360 Type 7, 360 Type 7, 360 Type 7, 360 Type 8, 360 Type 8, 360 Type 8, 360 Type 9, 360 Type 9, 360 Type 9, 360VS Type 5, 360VS Type 5, 360VS Type 5, 360VS Type 6, 360VS Type 6, 360VS Type 6, 360VS Type 7, 360VS Type 7, 360VS Type 7, 360VS Type 8, 360VS Type 8, 360VS Type 8, 360VS Type 9, 360VS Type 9, 360VS Type 9, 361 Type 5, 361 Type 5, 361 Type 5, 361 Type 6, 361 Type 6, 361 Type 6, 361 Type 7, 361 Type.
Check StockChuck Key Holder
- Genuine, OEM Black & Decker Replacement Part.
- Black & Decker replacement chuck key holder, part number 065288-01.
- Compatible with: 1042 Type 100, 1042 Type 101, 1042 Type 102, 1046 Type 100, 1046 Type 101, 1046 Type 102, 1065 Type 100, 1065 Type 3, 110 Type 1, 1161-44 Type 100, 1162-36 Type 1, 1164-36 Type 1, 1165 Type 1, 1165 Type 100, 1165-44 Type 100, 1166-220 Type 101, 1166-36 Type 100, 1166-36 Type 101, 1166-44 Type 100, 1166-44 Type 101, 1166-BDK Type 1, 1166-BDK Type 2, 1170-10 Type 1, 1170-10 Type 2, 1170-BDK Type 100, 1170-BDK Type 101, 1170-BDK Type 102, 1170-BDK Type 103, 1172-10 Type 1, 1172-10.
- Measures approximately 7.15 X 1.10 X 0.10 inches.
Check Stock