Categories

Best Its Alloy Tread Plate

DIYAREA Stair Treads Gauge Template Tool,Stair Jig, Metal Stair Measuring Tool,Adjustable Measurement Tool, Shelf Scribe Layout Tool for Stairs, Risers, Shelf and Cutting Drywall, 9.8''-72''

  • 【Accurate and Time Saving】With the DIYAREA stair tread template, you can obtain the exact length and angle of your tread accurately and quickly, which makes installing stair treads a piece of cake. More accurate and efficient than traditional tape measure.
  • 【Adjustable Length and Angel】The length of the stair template jig can be adjusted from 9.8 inches to 72 inches. And the stair tool can be rotated from 0° to 300° to measure irregular stair treads. You can easily adjust it to meet your needs.
  • 【Premium Materials】The stair jig adopts premium 304 stainless steel scale plate and aluminum alloy connecting rods. The anodized aluminum surface makes it excellent wear resistance and corrosion resistance. Compare with the wooden tools, it is more durable and longer lasting.
  • 【Simple to Use】The stair tread gauge is designed to assemble and disassemble easily, just fix the 4 screws and 4 knobs in the corresponding screw holes and adjust the length and angle of the stair gauge by tighten or unscrew the knobs with hands.
  • 【Multipurpose】The stair tread gauge is an ideal tool for cutting and measuring stair treads, deck floors, wall shelves, window sills and shelves, etc..
Check Stock

American Lawn Mower Company 1415-16 16-Inch 5-Blade Push Reel Lawn Mower, Gray

  • 5-Blade reel with a cutting width of 16” and durable 10” polymer wheels for maximum maneuverability.
  • Mechanical lawn mower with an adjustable blade height of 0.5”-2.5” with scissor action cut.
  • Manual grass cutter blades made of heat-treated alloy steel that stays sharp for years.
  • Environment-friendly alternative to gas-powered lawn mowers which is pollution-free and noise-free.
  • Low maintenance, lightweight and easy to use.
  • Capable of cutting grass up to 4 inches tall.
  • 16" cutting width - 1/2 to 2-1/4 inches Cutting heights.
  • Tempered alloy steel reel and bed knife blade with unbreakable steel side plate.
  • 10" durable composite wheels with radial tread tire.
Check Stock

Aluminum Stair Tread Template Tool, Stairs Treads Gauge 360°Rotating Design Adjustable Length and Angle Layout Tool Cutting Guide Tools for StairTreads, Risers, Drywall and Partition

  • Raw Material: The scale plates of the stair tread template tool are made of premium stainless steel which is durable, anti-corrosion, and anti-rust. Tie rods are made of aluminum alloy and the surface is treated by anodizing to prevent discoloration in humid or high-temperature environments..
  • Package Include:2 x Stair tread plate with scale.
  • Wide Application: The stair tread template tool can measure the length and angle of stairs. The stair gauge can meet all your needs when installing stairs, perfect for laying out wooden stair treads, wooden floors, closets,s and windowsills. Professional and easy-to-use tools for woodworking DIY or woodworking construction workers..
  • Easy Installation: The stair tread gauge is easy to install and easy to remove, no need to use other tools, just fix screws and knobs in the corresponding screw holes. Adjusting the tightness of the knobs is the switch to extend the length and angle of the stair gauge, easy to operate..
  • Flexible Angle: The scale plates of the stair gig can be rotated 360° to measure the rotation angle of the stairs, y....
Check Stock

TINTON LIFE Set of 13 Non-Slip Washable Stair Treads Carpet with Skid Resistant Rubber Backing Indoor Wooden Step Mats Self-Adhesive Stair Protectors 10.2\ x 25.2\ Alexander Red

  • Precise & Time-saving Stair Tread Tool - This stair stair measuring tool has a very precise scale, and it can adjust the scale accurately and measure accurately. Stair tread gauge will easily help you lay out stair treads, risers, and shelving. No more mistaken, and time-saving and MONEY-SAVING..
  • Multi-Uses - Our stair jig gauge will help you measure stair treads, risers and shelves. with 6 sconnecting rods, you can easily adjust the length or height from 11.4 - 60.7 inch to match any work requirements. The 360° rotation jig plate is easy to measure Irregular stair treads..
  • Long Lifetime Stainless Stair Tread Tool : The jie plate is made of high-quality 304 stainless steel , the adjustable link in the middle is made of high-quality stainless steel and the surface is treated by Anodizing.The overall product is sturdy and durable and can be used lifetime. Copper & diamond-shaped nut made of bakelite,Easy to adjust the tightness.
  • Ergonomic Design - Lased 0-10 in tick mark , curved and 0°to 360° adjustable jie plate, easy to operateand adjust to stair tread template set width providing a perfect layout for stair treads, risers and shelving.
  • Packing Product List - 2*Jig plate with ruler, 14* Stainless Steel Screws , 12* Thumb Nuts , 6* Adjustable Metal Con....
Check Stock

Jardineer Stand Up Weeder and Weed Puller, Standing Weed Puller Tool with Durable Steel Shaft, Easy Work Weed Grabber and Weed Remover with Foot Pedal (43 Inch)

  • ...d Remover】- This stand up weed puller comes in solid steel claw and thick shaft, unlike cheap iron claws and unsteady aluminum handle, ensures strong & durable use for years. The aggressive prongs get to the roots easily to grab and uproot grass roots efficiently..
  • 【 No Crack Foot Plate - Penetrate Soil with One Tread】- This stand up weed puller comes with steel foot plate, strongly bears your full weight to penetrate soil and grab the whole weed without cracking or breaking. Tilt standing weed puller to its "foot plate" side to easily uproot weeds..
  • 【 Standing Weed Puller to Save Your Back & Knees】- 43" stand up weed puller with long shaft, effortlessly uproot weeds without bending over or kneeling. Thus no more sore back or painful knees compared with ordinary weed remover. Ideal stand up weeder for all gardeners..
  • 【Remove Various Weeds for Healthy Lawns】- This weed remover is ideal for weeds with taproots, such as thistles, dandelions, plantain and more. This weed grabber allows to take back your lawns with less harmful chemicals..
  • 【Easy to Use with Foot Plate as Weeding Lever】- Simply center the weed grabber over the root, step on foot plate to push claw into soil to grab root, finally tilt the stand up weeder to its"foot plate" sid....
Check Stock

TOCOLES Tire Gauge Pencil, 2Pcs Pencil Tire Pressure Gauge PSI (5-50) with Tire Tread Depth Gauge and 8Pcs Tire Valve Stem Caps

  • [VALUE PACK] - Come with 2 pieces tire pressure pen, 1 piece tire tread depth gauge and 8 pieces tire valve stem caps, 11 pieces in total, enough quantity for daily use and replacement.
  • [WELL MADE] - The tire pressure gauge pencil is made of stainless-steel metal and zinc alloy, anti-rust and anti-corrosion, sturdy and durable. The car tire gauge is designed with a heavy-duty head, prevent air leaks at the nozzle. The ABS scale plate features clear marks, accurate and reliable.
  • [EASY USE] - Twist off the valve cap, press the head of the car pressure gauge into the gas nozzle, then the scale plate will slip out and you can read the tire pressure from the scale plate. After use, twist on the valve cap and push the scale plate back. No battery needed.
  • [HUMANIZATION DESIGN] - The pencil type tire pressure checker adopts 45 degree angle single head for easy operation and strong seal. Pocket-size air tire pressure gauge is designed with pocket clip, portable and easy to store.
  • [WIDE APPLICATION] - Our tire air pressure gauge for tires has three indicator, namely PSI (5-50), KPA (50-350) and BAR (0.5-3.5), perfect for checking tire pressure of cars, trucks, vehicles, motorcycles, bicycles etc..
Check Stock

Narrow Wall Mounted Attic Loft Ladder, 10+2=12 Pedals Aluminum-Magnesium Alloy Extension Wall Folding Stairs for Building Supplies Pull Down from Wall(Black Color 8.2-9.2ft Vertial Height)

  • ...Frame Size/Stainless Steel Design】Size of base frame of the ladder is 54x14cm( 21.2x5.5in), which is install on the Narrow Wall. Non-slip tread, width of step is 14cm(5.5inch).Thickened wall hanging steel plate, outstanding durability.Stainless steel thickening rivet, high strength, no rust..
  • 【Aluminum-magnesium Alloy/Loading 660lb】The loft wall ladder stairs is made of aluminum-magnesium alloy material, Max. loading capacity is 660lb. Each joint is connected by rivets. The use of thick rivets make the ladder connection more firm and secure..
  • 【Maintenance and Inspection】Periodically turn ladder stairs on its end or side and check the following: Look for broken welds or deck boards.
  • Look for ladder stairs frame distortion caused by overloads and impact loads..
  • 【Ergonomic Design/Simple Install】The telescopic staircase is derived from ergonomic design and can be pull down and closed with a long pull rod. Also very simple to install the ladder. It is only necessary to mount the fixed frame on the required wall, then connect the frame and the telescopic ladder..
Check Stock

Elitexion Angle Grinder Ribbed Back 4-1/2 inches Plastic Pad for Resin Fiber Disc with 5/8 inch 11 Thread, Max 20,000 RPM

  • High quality backing pad for resin fiber sanding discs..
  • Made of durable polypropylene pad with cooling holes..
  • Fit most angle grinders. 5/8 inch 11 tread Zinc alloy locking nut included..
  • Steel reinforced backing plate and accommodates multiple flange nut wrench sizes.
  • Designed for 4-1/2” diameter resin fiber disc with a 7/8” arbor hole. Ship and sold by Elitexion or Amazon only..
Check Stock

BestEquip Hand Truck Dock Plate 5200lbs, 24\ Length 48\ Usable Width 2/5\ Thickness, 3\ Height Difference Loading Dock Plates, Sturdy Aluminum Dock Plate for Carts Pallet Trucks

  • Premium Material: New 5052 type aluminum alloy for light weight and resistance to corrosion, ageing, and abrasion. It possesses good hardness and high strength, not easily deformed..
  • Stable Structure: Beveled entrance and exit edges provide smooth transition. Two locking legs secure the plate for safe loading and unloading. Sturdy and have a 5200lb load capacity..
  • Non-Slip Surface: Tread plate surface ensures skid-resistant safe traction. Dock plates and ramps can adapt to work in all weather condition. Safe to use..
  • Human-Friendly Design: Compact size: 24” x 48”. Light weight: 53lb. Ergonomic design with two lifting handles, and a pair of gloves is offered, very portable..
  • Wide Application: Widely used with two and four wheeled dollies, hand trucks, carts and pallet trucks. Perfect for usage in subway station, farm, shipments, and so on..
Check Stock

Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps

  • ☀[Package Includes] You'll get 1 set of brake lining thickness gauge(8pcs), 3pcs tire tread depth gauge, 2pcs tire pressure gauge and 10pcs tire valve caps..
  • ☀[Brake Lining Thickness Gauge] Brake lining thickness gauge is designed for detecting the thickness of brake pads quickly and accurately. And the purpose of color coded design is to match SAE or Metric recommendations for effective and efficient brake pad measurement..
  • ☀[Tire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
  • ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
  • ☀[Tire Valve Cap] 10pcs tire valve caps ar....
Check Stock

Nilight NI-KIT02 Front Frame License Plate Mounting Bracket Holder for Off-Road LED Work Lamps Lighting Bars,2 Years Warranty

  • Heavy-duty bracket: high-quality aluminum alloy material and advanced production process, The mounting bracket is impact resistant and anti-corrosion.
  • Mounting position: 4 different locations/methods to install the off-road lights. On the Bull bar, 2 Sets of mounting holes on top and 1 set in front.
  • Easy installation: no drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes.
  • Universal fitment: Fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars.
  • Package include: 1Pc front license plate mounting bracket.
  • Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion.
  • Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front.
  • Universal fitment: fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road aux....
Check Stock

Metal Stair Tread Template Tool, Stair Tread Jig w/12 Basement Retread Stairs, Stair Tread Gauge for Accurately Measuring Angle and Length (Black)

  • ❤️Perfect Tread Template❤️: This stair tread tool is made of high-strength aluminum alloy with high toughness and precision CNC machining. The surface is not easy to fade. Highly adjustable and useful for other projects..
  • ❤️ACCURATE❤️: This tool has 12 basement stairs to retread and the scale is etched by laser to ensure its clarity and accuracy. This tool was a must for doing the job. The tool was extremely accurate, easy to assemble, use, and light weight..
  • ❤️VARIABLE LENGTH❤️: This stair tread gauge tool package has extension parts with a length of 16.9 inches (No.A), 11.4 inches (No.B) and 8 inches (No.C). It could be set up for multiples sizes between 8 Inch to 55 Inch..
  • ❤️WILDLY APPLICATION❤️: The jig is perfect for accuratly measurement method of cutting wood to fit stairs and this can be used for so many different applications. Unless something is perfectly square, which is rare, this jig can transfer the angles to the workpiece. The jig is well made and holds tight from the measuring process to the tracing process!.
  • ❤️WELL PACKAGED❤️: All parts neatly fit into the provided box with foam insert to keep and protect tool. Box fit nicely into my tool drawer. Amazing tool without the bulk..
Check Stock

Stair Tread Template Tool - Stair Tread with Scale, Wood Stair Jig for Layout Shelf, Stairs, Risers, Drywall and Partitions, Measuring Gauge Range 10.2in-54.7in

  • 【Product Upgrade】NyPots stair tread template tool are ahead of other products in terms of quality, shape and function. We provide 8/12/16 inch extension rods in 3 sizes to meet your different length measurement needs.
  • 【Great Material】Our stair jig is equipped with premium 304 stainless steel scale plate and aluminum alloy connecting rods. The scale is laser marked. The overall product is sturdy and durable and can be used lifetime.
  • 【Widely Applicable】When you need to design irregular stair treads, shelves in the corners, window seats, or wall decks, this tool can help you complete the work accurately and efficiently. Perfect for laying out stair treads, risers, and shelving.
  • 【Ergonomic Design】Through the connection of different connecting rods, you can easily adjust the length or height from 10.2- 54.7inch to match any work requirements. The jig plate could be 360° rotation of angle to measure Irregular stair treads.
  • 【Simple & Portable】Simple accessories, easy to use. You only need to adjust a few knobs and adjust your tool to the position you want. Moreover, combination design is convenient to carry and storage.
Check Stock