Categories

Best Iv Clamp

Fluke 324 True RMS Clamp Meter

  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms.
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
  • CAT IV 300V/CAT III 600 Volt safety rating.
Check Stock

Psiber Data CT50 CableTool Multifunction Cable Meter

  • Traces AC/DC circuits from 0 - 600 V. The transmitter and receiver are CAT IV 600 V safety rated for electrical circuits in industrial environments.
  • Offers two output frequency modes for optimal tracing- 6 kHz for energized circuits- 33 kHz for de-energized circuits.
  • Features three power modes: “High” power mode for normal circuits, “Low” power mode for precision tracing in difficult areas and "Clamp" power mode provides a boosted induction signal via the optional signal clamp.
Check Stock

FLUKE-289/IMSK Industrial Multimeter Service Combo Kit

  • Fluke-289V Advanced data logging Multimeter has a large 50,000 count,1/4 VGA display.
  • The low impendence voltage function prevents false reading due to "ghost voltage".
  • The Fluke-i400 AC 400A Currant Clamp is your companion to the DMM to measure up to 400 A AC with 1 mA/Amp output.
  • This is the only current clamp available with a CAT IV 600 V/ CAT III 1000 V safety rating.
  • Lifetime warranty on Fluke-289 and 1-year warranty on accessories.
Check Stock

1587KIT/62MAX+ FC 2-in-1 Adv Elec Tr Ins Mult Kit W/62Max+ I400

  • Fluke 1587FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks.
  • Fluke i400 Clamp meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
  • Fluke 62 MAX+ Infrared Thermometer -30°C to 650°C (-22°F to 1202°F).
Check Stock

SmallRig Full Camera Cage for Sony Alpha 7R V / Alpha 7 IV / A7R IV / Alpha 7 S III / Alpha 1 - 3667B

  • ...hich is compatible with QD quick release shoulder straps and other accessories..
  • For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V..
  • Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment.
  • the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428..
  • Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S ....
Check Stock

Klein Tools CL600 Electrical Tester Digital Clamp Meter has Autorange TRMS Measures AC Current AC/DC Volts Resistance NCVT More 1000V

  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy.
  • Test leads measure AC/DC voltage, resistance, continuity and tests diodes.
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating.
  • Built to withstand a 6.6-foot (2 m) drop.
Check Stock

Klein Tools CL700 Autoranging Digital Clamp Meter TRMS 600Amp AC/DC Volts Current LoZ Continuity Frequency NCVT Temp More 1000V

  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy.
  • Electronic Tester's clamp measures AC current and its thermocouple probe measures temperature.
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes.
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating.
Check Stock

Sliver: Music From The Motion Picture

  • Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection.
  • Temperature Compensation through Fluke Connect Measurements app.
  • Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC.
Check Stock

60 DPM NEEDLELESS IV ADMIN SET

  • This 60 DPM IV admin set has a 83 inch extension with Roller Clamp, one MicroClave Luer Locking injection site, one Pre-Pierced injection site, Spin Lock connector and non-DEHP tubing. Weight: 1.12 oz.
Check Stock

10 DPM NEEDLELESS IV Admin Set

  • 10 DPM IV admin set has a 83 inch extension with roller clamp.
  • One MicroClave Luer Locking injection site.
  • Spin Lock connector and non-DEHP tubing..
Check Stock

CZC AUTO Hitch Clamp Anti-Rattle Stabilizer Heavy Duty Cross Clamp 2 1/2 Inch for Hitches On Trailers of Trucks SUV Vans RV Hitch Tightener Clamp for Hitch Tray Cargo Carrier Bike Rack Ball Mount

  • Creative Design of CZC AUTO Trailer Hitch Tightener: φ0.5 inch U-bolt and cross bar to eliminate rattle and movement for bike racks, hitch tray,....
  • Firm & Solid Hitch Coupling Clamp for Long Term Service: Made of high strength steel, the tightener fits for all weather condition. Nickel plated....
  • This Cross Hitch Tightener Clamp is perfect for locking 2 1/2 inch hitches, compatible with most hitches classes II, III, and IV (2, 3 and 4). The....
  • The Tow Clamp is Easy to Install and Hard to Loose Naturally: Insert the tube, lock them directly by U-bolt and cross bar. Put on flat washers and....
  • CZC AUTO - A Reliable Brand In Trailer Hitch Clamp Industry: We offer 30-day money-back for any reason, 12-month warranty for quality-related issues.....
Check Stock

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

  • ⚡【DC AC Current Clamp Multimeter】This multifuctional clamp-on meter can accurately measures AC DC current with 400A/1000A ranges, 100mA/1A resolution；AC and DC Voltage to 1000V, Resistance to 60M ohms.
  • Temperarture -4~1832℉ (℃/℉ Optional), Test voltage 4V, can measure light-emitting diodes, and continuity test..
  • ⚡【Sensitive Hall Effect Clamp Sensor】Engineered with hall effect sensor to ensure high precision measurement on DC/AC amperage testing. Built with big jaw caliber size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
  • ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial,....
Check Stock

KAIWEETS Clamp Meter 1000A True RMS AC Current Amp Meter Inrush VFD LOZ Mode 6000 Counts Measures Current AC/DC Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

  • True-RMS Clamp Meter: This multimeter can accurately measure AC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode,....
  • Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting....
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient....
  • Advanced Functions: The Clamp Meter has VFD, LOZ, MAX, MIN, REL, RAN, Date Hold, Low battery display and automatic shutdown. Multi-function clamp....
  • Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm.....
Check Stock