Categories

Best Jack Stands Low Profile 2

K Tool International 2 Ton Capacity Trolley Jack & Jack Stands Set; Durable Steel Construction, Trolley 19 lbs & Stands 11 lbs; KTI63097A

  • [CAPACITY] - K Tool Trolley Jack and Jack stands are rated to hold up to 2 tons of weight or 4, 000lbs.
  • [TROLLEY JACK SPECS] - Low height 5. 31" raised height 12. 99" Overall length 17. 72" Overall width 7. 87" Handle length 16. 53" Saddle diameter 2" Front wheel size 2. 6" Rear caster wheel size 1. 6" Weight 18. 74 lbs.
  • [JACK STAND SPECS] - Low height 10. 75", Raised height 16. 73" Base dimensions 6. 89" x 6. 57" Weight 11 lbs (Pair).
  • [DURABLE] - K Tool trolley jack and jack stands are built for extra lifting and maneuverability for all load lifting needs.
  • [ WARRANTY] - Covered by a 1 year on material and workmanship.
Check Stock

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock

Mopar Jeep Wrangler JL Gladiator JT Tall Jack Base Spare Tire Jack Base New OEM

  • INCREASE PRODUCTIVITY: Each 3 ton jack stand is designed to increase your productivity while maintaining safety.
  • Safely and easily adjust the height of these tall jack stands from 11-1/2”- 17" as needed.
  • SUPPORTS MANY VEHICLES: This car jack stand supports rated capacity, partial vehicle loads on one end of a vehicle.
  • 3 ton floor jack stand handles a wide range of vehicles, including small cars, SUVs, and light duty trucks.
  • SUPERIOR PERFORMANCE: These 3 ton jack stands have a recessed saddle that ensures secure placement and a strong hold that won’t slip.
  • Wide pyramid foot base on these vehicle jack stands provides added strength and stable support.
  • PLACE ANYWHERe: The jack stands set has large welded foot pads to provide extra support when placed on asphalt and other surfaces, and our jack stands combo prevents sinking on soft surfaces.
  • These car stands keep your car protected.
  • PRODUCT SPECIFICATIONS: Includes Two (2) 3-ton jack stands.
Check Stock

K Tool International 2 Ton Extra Long Low Profile Service Jack (XD); Durable Steel Construction. Swivel Rear casters, Overload Protection, Low Profile; KTI63105A

  • [LOW PROFILE] - This Service jack maintains a low Profile with lifting range 2-3/4" to 24".
  • [DURABLE] - Heavy-duty steel construction provides stability and endurance. Swivel rear casters provide smooth maneuvering and positioning.
  • [PROTECTION] - Built-in valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 2 year warranty on material and workmanship.
Check Stock

JEGS 80077-2 Replacement Saddle Pad For JEGS Professional Low-Profile 3-Ton Alum

  • For JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
  • Sold Individually The JEGS 80077-2 saddle pad is a replacement for the JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack 555-80077. To prevent slippage this pad is made from flexible rubber with a dimpled surface. Situated in the center of the saddle, this piece also provides a padded surface to protective bodywork and....
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

BIG RED T82001S Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands and Blow Mold Carrying Storage Case, 2 Ton (4,000 lb) Capacity, Red

  • Combo kit includes: (1) 2-ton trolley jack, (1) jack handle, (2) 2-ton jack stands, and (1) blow mold case.
  • 2-ton trolley jack features 360-degree rotating saddle, positive locking safety release handle, and rear swivel casters.
  • Integrated overload protection valve prevents you from lifting items weighing more than the jack's capacity.
  • Jack stands have automatic locking pawl and tooth design for extra protection.
  • Trolley jack rated up to 4,000 pounds capacity with lifting range of 5.5-inches to 13.4-inches.
  • jack stands rated to 4,000 pounds capacity with support range of 10.8-inches to 16.5-inches.
Check Stock

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • ...ndustrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position..
Check Stock

Vestil Portable Scissor Lift Table - 1,000-lb. Capacity, 58in. Raised Height, Model Number PST-1-58

  • Hydraulic jack having a low enough profile to raise forklifts and high enough profile to raise farm equipment, tractors and some earth moving equipment..
  • Two lift points for numerous lifting applications. Two position saddle at scissors end can be quickly rotated to handle either edges or flat surfaces of a load..
  • 2 1/4 inch low lift height at scissors end..
  • 43 inch removable "T" handle for ease of pumping and storage when not in use. The "T" handle makes transporting and maneuvering the jack very simple..
  • Provided faster rising action and eliminates the need to bend down to get the full pump stroke..
Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

  • [Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
  • [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
  • [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
  • [Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

  • BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
  • This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
  • The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
  • Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
  • This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..
Check Stock

Arcan 2 Ton Extra Long Reach Low Profile Steel Floor Jack A20016 / XL2T Black

  • LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack.
  • LOW PROFILE FRAME For easy access under low ground clearance vehicles.
  • DUAL PUMP PISTONS Quickly raises the floor jack saddle to load.
Check Stock

WARN 101337 Elite Series Full-Width Front Bumper with Grille Guard Tube Fits Jeep Wrangler JL 2018-2020 and Jeep Gladiator 2020

  • Integrated grille guard tube features a low-profile look.
  • The bar is welded on and adds extra protection for both the vehicle and the WARN winch.
  • Advanced Bumper geometry designed specifically to increase approach angles and articulation.
  • Will accommodate 37" tires with only a 2" lift.
  • Features integrated off-road jack points for easy access when jacking up a JL.
  • Precision welded eyelets for shackles allows for increased recovery....
  • State-of-the-art flat black powder coated finish features a five-step pretreatment process with zirconium nanotechnology.
  • Integrated winch mount is engineered and tested for the high stresses of winching.
  • Fits ZEON, ZEON Platinum, VR, M8, XD9, XD9i, 9.0Rc, and 9.5xp....
Check Stock