Categories

Best Jaw Width Vise

MYTEC Home Vise Clamp-On Vise , 3.0"

  • HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue

  • ...m duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
  • TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm)..
  • SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe ....
Check Stock

Mophorn Milling Vise 4'/100mm,Bench Clamp Vise Nodular Cast Iron Material,Clamping Vise Clamping Force 19KN Max, Milling Machine Vise

  • Clamp Capacity: High precision clamp vise with a jaw width of 3.94 inch (100 mm). Jaw opening: 4.7 inch (120 mm).
  • Main Parameter: Super-lock clamp vise height: 3.7 inch (95 mm). Jaw height: 1.2 inch (30 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Well-chosen nodular cast iron offers strong toughness, making this clamping vise solid and durable.
  • High Precision: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
Check Stock

Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 7" (17.78 cm), Jaw Opening 8" (20.32 cm), Throat Depth 3" (7.62 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
Check Stock

Nuovoware Heavy Duty Bench Vise 4.5 Inch, 240° Swivel Locking Base Bench Clamp with 125mm Vise Jaw, Clamp-on Home Merchanic Vice Desktop Clamp for Woodworking, Drilling, Cutting Conduit - Black&Blue

  • 【Universal Bench Vise】: Max opening jaw width: 4.3inch/11cm, Jaw length: 4.5 inch/11.4cm, Throat Depth: 2.3inch/6cm, Mounting Screw Size: 0.3x2.8inch. Designed for woodworker/metal workers.
  • provides more than 2000 pounds of clamping pressure for heavy duty jobs..
  • 【240-Degree Easy Positioning】: Designed with 240 degree swivel base with a double lock down bolts, this heavy-duty bench vise allows rotating the vise to position your workpiece. Smooth guide rail makes the screw and handle function smoothly and effortlessly. A great helper for left-handers..
  • 【High-Quality Cast Iron】: Made of strong nodular cast iron and machined to very close tolerances. Withstands distortion under high pressure. Stainless steel vise jaw grips the projects firmly with the adopts quenching and re-fire technology to increase its hardness and strength. This bench vise presents your with rugged use and longer life span, which much gives you an excellent working experience..
  • 【Strong Magnetic Vise Jaw Pads】: Including a pair of magnetic rubber vise jaw pad in size 125mm to help you protect the projects from scratches, and grips any threaded/smooth parts like wood, metal, plastic, tubing firmly and safely. Magnetic features super easy installation and offload for any ....
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

Mophorn High Precision Milling Vice 6 Inch,Bench Clamp Vise Nodular Cast Iron Material,Flat Clamp Vise Mill Vise for Milling Drilling Machine and Precision Parts Finishing

  • Clamp Capacity: High precision clamp vise with a jaw width of 5.9 inch (150 mm). Jaw opening: 6.3 inch (160 mm).
  • Main Parameter: Super-lock clamp vise height: 4.7 inch (120 mm). Jaw height: 1.8 inch (45 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
  • High Precision: Precision milling drilling vise, able to accomplish sawing, filing, chiseling and some assembly and removal jobs in milling, drilling machine and precision parts finishing.
Check Stock

PONY Bench Vise 5 Heavy-Duty Utility Combination Pipe Home Vise Swivel Base Bench for Woodworking One-Pair Vise Jaw Pad Included

  • Multi-Jaw Function: This Multi-Jaw is applicable for clamping flat material, pipe and tube. Anti-slipping, avoid scratches and damages to items that....
  • Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of....
  • Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table.....
  • Swivel Feature: 360 degree swivel design. It also features a swivel base, and allows an ever greater degree of accuracy while you are working with a....
  • Large Capacity: Anvil Area: 2-3/4 inch * 2-3/4 inch, Throat Depth: 3-1/2 inch, Jaw Opening: 4 inch, Jaw Width: 5 inch. Reach up to 3968 lbs. of....
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

Mini Vacuum Base Vise Portable with 360°Swiveling Head and Powerful Suction Multi-Angle Pivoting Small Vice

  • Vacuum Base Vise mounts on any smooth work surface for work holding where you need it, such as laminates, steel, granite, glass and others,Please wipe....
  • Ideal for glueing, soldering applications, repairs, assembly, and more all with ease..
  • Vise can be rotated 360-Degree and pivots 90-Degree positioning work without removing clamped part from the vise jaws.
  • Rubber Jaw Covers protect delicate items from damage and body parts are precision die cast for longevity.
  • Jaw Width: 2. 7”, Jaw Opening: 2. 7”, Throat Depth: 0. 5”.
Check Stock

Vice

  • 【360° Rotation】Built with a 360 degree swivel base, this work bench vise is perfect for use with a variety of clamping angles for versatility. Smooth guide rail makes both the screw and handle use smooth and effortless..
  • ✌️【Universal Vise】Maximum opening of jaw is up to 2.5'', jaw width 3.3''. Base clamping range increased to 4'' for various thicknesses. Designed for home, workshop, professional use, general purpose and light work, and ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, and more!.
  • 【High Quality】Made of high-grade cast steel - The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. The jaw is hardened and hammered to increase its hardness and strength, providing long-lasting durability and reliable grip..
Check Stock

Vice

  • 【360° Rotation】Built with a 360 degree swivel base, this work bench vise is perfect for use with a variety of clamping angles for versatility. Smooth guide rail makes both the screw and handle use smooth and effortless..
  • ✌️【Universal Vise】Maximum opening of jaw is up to 2.5'', jaw width 3.3''. Base clamping range increased to 4'' for various thicknesses. Designed for home, workshop, professional use, general purpose and light work, and ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, and more!.
  • 【High Quality】Made of high-grade cast steel - The surface is sprayed to enhance corrosion-resistance and to make it more smooth to the touch. The jaw is hardened and hammered to increase its hardness and strength, providing long-lasting durability and reliable grip..
Check Stock