OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine
- Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
- High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
- Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
- Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
- High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock
PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty
- PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
- Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
- Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
- Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
- LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock
FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)
- 【PRODUCTS INCLUDE】 - FJL FORCE 4IN lathe chuck set includes chuck body,a set of fastening levers,T-hex wrench,1'' x 8TPI pre-thread and 3/4" x 16TPI conversion adapter, a set of 2in dovetail jaws,a set of step jaws, a set of flat jaws,a set of high jaws,a set of round jaws,to meet your creation basic clamping needs,no need to worry about going pairing and finding jaws,bringing much convenience to your operation..
- 【LONG SERVICE LIFE】 - FJL FORCE 4inch self-centering keyed wood lathe body is made of high-grade K1045 steel,the sturdy wood lathe chuck can withstand high-intensity work without damage,extending the service life of the chuck.The jaws are hardened and hardened surface with black oxide electric coating,stain and wear resistant,not easy to rust,long service life..
- 【ANTI-JITTER】 - Four-jaw mini lathe chuck has a high-precision self-centering design,the jaw fits perfectly with the chuck,tightening the clamping force beyond your imagination,the keyed fastening mechanism prevents the chuck from loosening during high speed operation,the claw and the disc body is linked with the I-shaped structure more firmly,the gap is small,the precision is high, there will be no jitter,falling problems..
- 【QUICK INSTALLATION】 - Lathe tools clamping wi....
Check StockPSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System
- Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
- Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor.
- Chuck body weighs 4 lbs and is 4" in diameter.
- Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal.
- Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal.
- Includes screw chuck, allen wrench, and a set of tightening levers.
- This "C-Series" chuck is compatible with all "C-Series" jaws and accessories.
Check Stock
CKS375 Wood Lathe Chucks, 3.75\ 4-Jaw Self-Centering Scroll Chuck with 1\ x 8TPI Thread Woodworking Turning Tools Set Include( 3.75 Gear Chuck,5 Interchangeable Jaws, 1 Wood Screw)
- PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
- Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs.
- Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
- Application: This CKS375 3-3/4"" Wood Lathe Chuck Set includes a 5-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
- LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check StockProlinemax 10' Chuck + 220-480 LBS Welding Positioner Positioning Rotary Turn Table Tilt 0-135 Welder 110V
- Horizontal Loading Capacity: 480 lbs *Without Chuck Attached*.
- Vertical Loading Capacity: 220 lbs *Without Chuck Attached*.
- Center Hole Diameter of The Table: 1-1/8''.
- Unit Weight: 78 lbs (Positioner) 46 lbs (Chuck).
- Overall Dimension: 11-3/4''L x 15''W x 22-1/4''H with Chuck Attached *estimate only*.
Check Stock
4 Inch 4 Jaw Mini Wood Lathe Self-Centering Chuck Set for Beginners Turning Wood Bowls Vases (1 Inch x 8TPI Thread)
- PAKAGE LIST: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck.
- FEATURES: Internal jaws tighten around workpieces varying from 1-1/2" to 3-3/8". External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-7/8" Included screw chuck provides even more options for supporting your projects.
- HIGH PERFORMANCE LATHE CHUCK：Our 4-inch 4 Jaws Lathe Chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
- WIDELY USED: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
- FRIENDLY REMINDER: Definitely make sure you get it tight, Otherwise, It also loosens in the middle of your work, causing your project to fly off the lathe.
Check StockPROXXON MICRO Mill MF 70, 37110
- Includes the lathe, chuck key, five-piece carbide tipped cutter kit, internal chuck jaws and external chuck jaws, 11 feed rate gears and owners manual.
- Drill, cut and turn metal, wood and plastic parts with precision..
- Erie Tools variable speed 7 in. x 14 in. benchtop mini metal lathe creates precision parts..
- Variable speed motor adjusts to 2500 RPM in either rotational direction allows left-handed threads..
- Thread indicator helps users turn screw threads anywhere from 12 to 52 TPI. Metric or imperial..
Check Stock
LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)
- 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
- 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
- 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
- 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
- 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check StockHD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools
- 5/8" Heavy Duty Chuck for Magnetic Drill Press.
- 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
- Please confirm your drill is compatible with a 3/4" Weldon Shank.
- 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check StockPSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck
- Chuck weighs 1.2 lbs., and is 2.5" in diameter..
- The jaws will secure blanks up to 1" across, and 4" long..
- The chuck is pre threaded to 1" x 8 tpi to match your spindle..
- Includes two tommy bars to tighten and loosen the jaws..
Check StockMILLING INDEXING 4'/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)
- Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.
- Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground..
- Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table..
- It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero..
- QUICK FAST DELIVERY THROUGH EXPEDITED SERVICE WITH A TRACKABLE AWB NO. TO USA & WORLWIDE..
Check StockJET Lathe Chuck Set 1'x8TPI, 5 Sets of Jaws
- Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread..
- Packed securely in a hard plastic JET case with EVA foam..
- Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks.
- Stainless steel T-Handle adjusts jaws concentrically.
Check Stock
