Categories

Best Jeep Trailer

Buyers Products 1809060A Hitch Plate , Black

  • 2IN HITCH RECEIVER: With a 3,500 lb. towing capacity and a 350 lb. tongue weight, you'll be equipped for getting your gear to wherever the adventure is. Includes installation hardware & instructions. Consult your vehicle manual for specifics..
  • TRAILER HITCH: Designed as a one-piece welded assembly for added strength, we've built our receiver hitch to match the towing capacity of your JK and to work with all factory equipment..
  • OFFROAD ACCESSORIES: Get serious about off-roading with a variety of tow hooks, hitches & kits that give yourself a way out in sticky situations. We offer steel winches, synthetic rope or steel cable & more recovery accessories..
  • RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models.
Check Stock

Partsam 2x Universal 16 LED Stop Tail Turn Signal Backup Reverse Brake Clearance Marker Lights Lamps Red/White Replacement for Jeep YJ JK CJ Truck Trailer Waterproof 12V

  • Partsam (2 x Red/White) stop / turn / tail /signal and backup lights for Truck Trailer..
  • This square stop turn tail light is universal, Also you can DIY it to suit for Jeep YJ JK ,Jeep CJ CJ-7 CJ-5 ( NOT factory Jeep light, Modification is needed. ).
  • Note: license plate light is not included!.
  • Combo functions as stop, turn, tail, back-up light, and reflectors for most 12V vehicles like Jeep, trailers, trucks, SUVs, RVs, caravan,vans, boats etc..
  • Each equiped with 16pcs LED lights inside, including 12 red square LEDs (Stop,Turn & Tail) & 4 white square LEDs (Back-up/Reverse).
  • ☛☛No License Plate illuminator and side indicators Included ☚☚.
  • EASY TO INSTALL: Black wire is the GROUND.
  • Black+Brown, Red light is low brightness.
Check Stock

CURT 99317 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Jeep Wrangler JK

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Jeep Wrangler JK..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight, 350 lbs. tongue weight, 4, 000 lbs. weight distribution capacity and 400 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2011-2013 Jeep Grand Cherokee - 13182 & 56009

  • Fits: 11-21 Dodge Durango Excluding SRT // 12-21 Jeep Grand Cherokee Excluding SRT SRT8 Trackhawk.
  • Kit Contains: (Part Number: 13182): Class 3 Trailer Hitch // (Part Number: 22272): Rubber Hitch Tube Cover.
  • Class 3 Trailer Hitch Details: (Part Number: 13182): Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight // Compatible with weight distribution hitch (7,500 lbs. WD / 750 lbs. WDTW) // Custom-made in an OEM style for specific vehicles // Concealed main body for OE look and seamless integration with the vehicle // Tested for safety in accordance with SAE J684 // Precisely welded for superior strength and fit.
  • Class 3 Trailer Hitch Details: (Part Number: 13182): Protected by a durable high-gloss black powder coat finish // Co-cured in a rust-resistant liquid Bonderite coating, inside and out // Equipped with an open-back receiver for easy cleaning // Limited lifetime warranty (one-year finish, one-year parts) // NOTES: Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities // Includes installation hardware.
  • Rubber Hitch Tube Cover Details: (Part Number: 22272): Protects 2" x 2" receiver tube opening when not in use // Adds a clean, finished look and keeps debris out // Friction fit does not require a pin and....
Check Stock

CURT 13048 Class 3 Trailer Hitch 2-In Receiver Concealed Main Body Compatible with Select Jeep Grand Cherokee ZJ

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 8,000 lbs. weight distribution capacity....
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing....
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket....
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder....
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Jeep Grand Cherokee ZJ.
Check Stock

Tekonsha 9030 Voyager Electronic Brake Control Black

  • PROPORTIONAL ELECTRIC BRAKE CONTROLLER: Provides automatic braking based on the intensity and rate at which you apply your tow vehicle’s brakes,....
  • EASILY INSTALL THANKS TO PLUG & PLAY: The Voyager trailer brake controller has a snap-in dash mounting clip, Plug & Play port for two plug adapters,....
  • EASY-TO-READ INDICATOR: Color LED indicator shows settings, real-time diagnostics, and alerts. Red light means power increase to trailer brakes. Green....
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Voyager will apply....
  • VERSATILE: The Voyager electric brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and....
Check Stock

Tekonsha 8507120 Brakeman IV, Time-Delay Brake Controller For Trailers with 1-4 Axles, Black

  • TIME-DELAYED DIGITAL BRAKE CONTROLLER: Applies braking power that ramps up, or increases over a period of time, at a fixed rate. This makes the Tekonsha Brakeman IV brake controller ideal for basic, light-duty towing needs.
  • EASILY INSTALL: The Brakeman IV trailer brake controller has a Plug & Play port for easy installation. As a time-based controller with a compact design, the unit can be installed above or below the dash, in any direction, as it is within reach of the driver.
  • EASY-TO-READ INDICATOR: Digital display shows settings, real-time comprehensive diagnostics, and short circuit protection. Red light means power increase to trailer brakes. Green light means secure connection with trailer “.
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Brakeman IV will apply power to your trailer’s brakes up to the amount of power previously set.
  • VERSATILE: The Brakeman IV digital brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). Vehicle-specific Tekonsha Plug & Play brake controller wiring harness sold separately.
Check Stock

CURT 13900 Multi-Fit Class 3 Adjustable Hitch 2-Inch Receiver 5,000 lbs.

  • VERSATILE FIT. This particular hitch is compatible with select vehicles from Chevrolet, Chrysler, Dodge, Ford, GMC, Isuzu, Jeep, Mazda, Nissan,....
  • STANDARD RECEIVER. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing....
  • DEPENDABLE STRENGTH. This adjustable hitch receiver is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated....
  • FULLY TESTED. The adjustable tow hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and....
  • RUST, CHIP, UV-RESISTANT. This universal trailer hitch is protected with a durable black powder coat finish for long-lasting resistance to rust,....
Check Stock

Retired Air Force Custom Hitch Plug for 2

  • This trailer hitch cover plug is made of heavy duty black rubber, fits for standard 2"" x2"" receiver tube and hitch ball..
  • Hitch cover mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required..
  • 2inch tow hitch cover, universal fit 2-inch x 2-inch receiver tube, compatible with Class 3 III and Class 4 IV and Class 5 receivers, compatible for Ford GMC Toyota Jeep Dodge Nissan Audi BMW Porsche Chevrolet Mercedes Benz Polaris ATV UTV..
  • This heavy duty rubber plug is designed to protect receiver tube in heavy weather, keeps the rain, dust, snow and ice from the hitch tube and protect the receiver tube from rust..
  • The hitch receiver cover is designed for optimal convenience, allowing you to install it in a moment, whenever needed. Just fit it into the hitch receiver and push it into place..
Check Stock

CURT 13392 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Jeep Wrangler JL , Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 4,000 lbs. weight distribution capacity and 400 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Jeep Wrangler JL.
Check Stock

CURT 13434 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Jeep Gladiator JT Pickup Truck Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Jeep Gladiator JT (Hitch is not to be used in Weight Distribution Applications).
Check Stock

CURT 99309 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Toyota Highlander, Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 7,500 lbs. weight distribution capacity and 750 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Dodge Durango and Jeep Grand Cherokee WK2.
Check Stock

CURT 45797 Trailer Hitch Adapter 2-Inch Receiver 2-in Drop or Rise 7,500 lbs

  • VERSATILE ADAPTER. This receiver hitch adapter easily inserts into your trailer hitch whenever needed to drop or raise the connection point by 2....
  • DINGHY TOWING. This drop hitch adapter is perfect for flat towing a car, SUV, Jeep or truck, allowing you to level your tow bar and vehicle base....
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch receiver. It also accepts any....
  • SOLID STRENGTH. This raised hitch adapter is constructed from high-strength steel to ensure reliable towing. It is rated for 7,500 pounds.
  • CORROSION-RESISTANT. CURT drop receiver adapter hitched are finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
Check Stock