Categories

Best Jig Guide

Kreg KJHD Jig HD

  • Premium Pocket Hole Jig: Creates heavy-duty joints via steel-enforced drill guide holes.
  • Go Big: Kreg Pocket-Hole Jig HD is bigger and stronger, works well for 2x4s and thicker materials.
  • Portable Jig for Large Outdoor Projects: Kreg jig works with material 1 1/2 inch and thicker.
  • Contains Woodworking Drill Guides: Contains 1 7/16-inch center-to-center drill guide spacing for easy drilling.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock

Magswitch Ultimate Thin Stock Jig Rip Guide - Tool Attachment for use with the Magswitch Workholding System

  • The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included).
  • Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch.
  • Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables.
  • This jig rip guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock, making it ideal for thin stock hold down or infeed/outfeed on a table saw.
  • The jig rip guide is built from strong and durable ABS UL94VO material for years of use. All required attachment hardware is included.
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • ...use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radius router corner radius jig router corner radius template router corner template router radius guide router radius jig router round corner template router template routing corners routing jig templates corner radius jig router woodpeckers tools..
Check Stock

GOOFISH Jigging Rod 6 6 Solid Nano Tech Blank Slow Pitch Jigging Fishing Rod Fuji Guide Reel Seat Saltwater Freshwater Spinning Casting Jig Rod Green PE2-4 1 Piece Spinning

  • Color/Size:Choose PE 2-4 OR PE 3-6 Model from the color option,choose the spinning or casting model from the size option: 1 Piece-Spinning/Casing：1....
  • Warm Prompt:Guide is the newest FUJI K-series&A-ring also FUJI reel seat,powerful for saltwater fishing, add extra FUJI backstop kit for reel seat :....
  • Specification:PE 2-4,Jig 120-350g Max jig 350g,Dead lift 15kg,PE3-6 Jig 150-400g Max jig 500g,Dead Lift 18kg.
  • Spiral or Straight Guide System Design:Spiral guide system only available for casting model not spinning, that is common sense! Left Spiral Guide....
Check Stock

Aospun 3 in 1 Dowel Jig Drill Kit, Adjustable Woodworking Drill Locator Hole Punch Tool, Pocket Hole Jig Kit with Locator Clip 8/10/15mm Bits

  • PACKAGE: The Pocket Hole Jig Kit comes with 1×3 in 1 Doweling Jig Drill, 2 x drill bits (8/10mm), 1×15mm hole opener, 1× round dowel positioner( 8mm, 10mm),3x wood dowel pins, 1 x wrench, 1 x allen wrench. 3 in 1 multi-function drill guide , for drilling dowel holes and vertical holes..
  • EXQUISITE CRAFT: The pocket hole jig is precision machined from 6061 high-quality aluminum alloy, and the surface of the drilling guide locator is anodized, which is strong and durable, anti-corrosion and rust-proof, and the product has high hardness and can be used for many years..
  • EASY TO USE: 3 in 1 dowel jig with 8/10/15mm drill bit woodworking pocket drilling jig, easy to adjust drill height and hole depth, easy for anyone to use. Pocket hole connectors are ideal for leg and rail connections, as well as cabinet construction. Insert screws into narrow pinch points..
  • IDEAL ACCESSORIES：Accurately locating and drilling locating holes has never been easier with our innovative Woodworking Drill Guide Locator Fixtures. The exquisitely processed drilling guide kit is designed with a precise scale on its main body, and the scale can be adju....
Check Stock

GOOFISH Jigging Rod 6'6'Solid Nano Tech Blank Slow Pitch Jigging Fishing Rod Fuji Guide Reel Seat Saltwater Freshwater Spinning Casting Jig Rod (Blue PE3-6 1 Piece Casting Right Spiral)

  • Color/Size:Choose PE 2-4 OR PE 3-6 Model from the color option,choose the spinning or casting model from the size option: 1 Piece-Spinning/Casing：1 Piece-Casting Left Spiral Guide/Right Spiral Guide：We/Amazon will arrange the shipping as per your ordering option, if you canot find the items you want from option, which is meaning it is out of stock for now, you can purchase it when it become available again. We/amazon canot arrange different shipping with your current order list..
  • Warm Prompt:Guide is the newest FUJI K-series&A-ring also FUJI reel seat,powerful for saltwater fishing, add extra FUJI backstop kit for reel seat : Blank:it is the most advanced material processing technology made of SOLID NANO TECH blank, so it is lighter weight,stronger power, sensitive tip than common rods..
  • Specification:PE 2-4,Jig 120-350g Max jig 350g,Dead lift 15kg,PE3-6 Jig 150-400g Max jig 500g,Dead Lift 18kg.
  • Spiral or Straight Guide System Design:Spiral guide system only available for casting model not spinning, that is common sense! Left Spiral Guide System Fit for Right Handle Reel: Right Spiral Guide System Fit for Left Hand Reels usually we suggest, But it's not necessary. You can use left handle reel with left spiral guide model, right handle reel fit with ....
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw.
  • CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions.
Check Stock

Kreg Hardware Installation Kit with Jigs and Two 3-Inch Face Clamps

  • This Hardware Installation + Pocket-Hole Jig Kit is great for cabinetry projects, and features two best-selling hardware jigs from Kreg.
  • Concealed Hinge Jig: Accurate hinge positioning with built-in indexing tabs. Reliable drilling with bit guide and stop collar..
  • Kreg Pocket Hole Jig 310: Portable jig for creating pocket-hole joints. Simple set up and easy to use with material-thickness stops..
  • clamps materials up to 2 3/4″ thick. Helps create a flush joint during pocket-hole assembly..
  • Includes 1 Concealed Hinge Jig, 1 Cabinet Hardware Jig, 1 Cabinet Hardware Jig and 2 Classic Face Clamps.
Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

  • Jig saw guide is fully adjustable to accommodate most jig saws.
  • Adjustable pointer guide keeps your cuts true.
  • Clamp Edge includes ruled edge for easy measuring.
  • Easy to change from cutting with the Clamp Edge guide to cutting freehand.
  • Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.
Check Stock

Jasper 200 PRO Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 2 ¼ to 18 3/16 inche -Includes Calibration Disc, Pivot Pins and Fits Most Popular Routers

  • : The Jasper 200 Pro router jig guide allows you to cut 256 different-sized, precise, perfect circles from 2 1/4” to 18 3/16” D.
  • : The 200 Pro circle cutter router jig is made from high-quality, construction grade polycarbonate and, with registration, is guaranteed for life.
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths.
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more.
  • : THE JASPER 200 is WOOD MAGAZINES Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind.
Check Stock

Kreg Pocket-Hole Jig 720PRO with the KHC3 Face Frame Clamp KPHA730 Micro Pocket Hole Jig Kit and SPC-C1-100 1 Inch Pan Head Pocket Hole Screws 100 Count

  • The Pocket-Hole Jig 720PRO is the most advanced jig yet from Kreg with features make project building incredibly efficient. One-motion clamping with....
  • Included with the 720PRO: Kreg Docking Station material support wings with a repeatable stop, as well as a Pocket-Hole Jig Clamp. Use the Pocket-Hole....
  • With the Pocket-Hole Jig 720PRO, you get the Kreg Docking Station material support wings with a repeatable stop, a Pocket-Hole Jig Clamp, 160 Kreg....
  • This Micro-Pocket Drill Guide Kit is perfect for small projects, ½" material, and narrow stock. Insert the Micro-Pocket drill guide block into your....
  • This bundle includes the Kreg 720PRO Pocket Hole Jig the KHC3 3 inch Face Frame Clamp the KPHA730 Micro Pocket Hole Kit and the SPC-C1-100 1 inch Pan....
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...gh the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
Check Stock