Best Jigs Fixtures

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

• Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
• Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
• The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
• The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
• For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....

Kit For Build Woodworking Jigs Fixtures Tabletop | For Cutting Routing Drilling Sanding Assembling | Inline Track Clamps | Dovetail Aluminum Tracks | T-Track Accessories | T-bolts Star Knobs FullKit

• VERSATILE - build versatile jigs, fixtures, or hold-downs, create your own clamping jigs and fixtures, such as drill press table, bench vise, corner clamp, fence clamp and more of new clamping solutions.
• REFRESH- use our system alongside your T-track system, Ike with T tracks woodworking (T track rail or t track clamps), this kit includes all the parts to design and build any camping jigs just the way you want.
• COMPETIBILITY- our dovetail tracks can accept t track accessories (t track clamp, like t track hold down clamp, t track stop) that uses standard 5/16'' t bolts.
• INNOVATIVE- Revolutionary all-in-one kit includes -30⁰ dovetail aluminum tracks, T track accessories (T bolts, star knobs), inline auto-adjust clamps (dovetail clamps) and self-adhesive measuring tape. The perfect kit for woodworking as a hobby or pro.
• HIGHLY EFFICIENT- 18’’/450mm long track and clamping capacity of the inline clamps (dovetail clamps) up to 125Lb is more than enough for your projects. The auto adjust clamps slides into dovetail sturdy aluminum tracks for fast and easy clamping. This carpentry kit will turn your woodworking projects from a headache to an enjoyable experience, while saving you time and effort!.

Magswitch MagSquare 400

• An on/off magnetic work-holding square with 400 lb.
• (182 kg) of hold force from Magswitch Technology.
• M6 * 1 threaded holes on all sides and machined at 90° magnetic grip on 5 sides—strong on 3 sides.
• Versatile Workholding Square. Incredibly strong fast set ups, precise positioning. Make your own fixtures..
• Mounts anywhere with no limitations like clamps - use as a guide, stop or to secure steel.
• Magnetic grip on 5 sides. Holds flat and round steel..
• Machined at 90° and features pre-tapped holes on all sides for mounting tools, jigs and fixtures..

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

• When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
• The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
• When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to....

Hot Favorable 48' T-Track for Woodworking –Double Cut Profile Universal with Predrilled Mounting Holes -Woodworking and Clamps-Fine Sandblast Black Anodized – 2 Pack(black)

• 1-YEAR WARRANTY - We, as the seller & brand owner - Hot Favorable, provide exclusive extended warranty for our T-Track. If you have any problem with your purchase throughout one year, please let us know. We will solve it as soon as possible by all means..
• STURDY COMMERCIAL QUALITY - Constructed of High Strength Aluminum Alloy 6063 for durability and wear resistance..
• PRODUC SIZE - Each track size is 48" length x 3/4" width x 3/8" depth..
• EASY TO INSTALL - Easy to install each track is equipped with pre-drilled mounting holes for simple installation. The qty of screws is need as below: 12 screws per T-Tack, 24 screws per set. Please noted that the screws aren’t included in set, you need offer the screws yourself. 7 x 5/8" Flat Head Phillips Deep Thread Wood Screws is recommended..
• UNLIMITED USES - Our T-Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. Configure T-Track components in most every direction.
• Greatly Increasing the versatility of your T-Track assembly, jigs and fixtures..

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

• When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
• The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
• The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher
  ....

POWERTEC 71146 Aluminum Miter T-Bar, 48-Inch, aluminum grey

• FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy.
• BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
• VERSATILE: A perfect fit for all 3/4" x 3/8" t-slotted -miter slots (and standard table saws with t- slotted  miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications.  Also works with for Powertec 71167, Miter T-Track, for creating extension, jigs and other woodworking requirements..
• CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

• Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
• Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
• Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
• Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
• Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.

Eagle America 400-3700 Woodworking Thread Tap

WoodRiver 5-Piece Miter Track Mount

• Fits WoodRiver Standard 3/4" Miter Track.
• Fits most tools with 3/4" x 3/8" miter T-slots - Use these nuts to make handy shop jigs and fixtures.
• WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....

J.W. Winco L02-0127 PBH Plastic Ball Knob

• Package Dimensions: 4.064 H x 4.064 L x 4.064 W (centimetres).
• Plastic ball knobs can be used on machine tools, jigs, fixtures, and a variety of other equipment.

J.W. Winco L02-0142 PBH Plastic Ball Knob

• Ball knob: Black phenolic plastic, glossy finish.
• Plastic ball knobs can be used on machine tools, jigs, fixtures, and a variety of other equipment.

Kreg KMS7303 30-Inch Jig and Fixture Bar

• Perfect for building workshop jigs and fixtures.
• Screws along the bar adjust easily to compensate for any "play" in the miter gauge slot.
• Mounting holes every 4" (101mm) along bar length.