Categories

Best Jobsite Boot Puller

FootMatters Professional Shoe Shine Valet Kit - Includes Hardwood Boot & Shoe Care Box, Horsehair Brush, Mink Oil, Waterproof, Polish, Leather Lotion

  • (1) Hardwood Shoe Shine Box (10.8 x 7.5 x 5.24 inches).
  • (1) Wooden Horsehair Shoe Shine Brush and (1) Jobsite Boot Polish Cream Black 3 oz.
  • (1) JobSite Mink Oil 3 oz and (1) JobSite Leather Lotion 8 oz.
  • (1) JobSite Snow Shield Beeswax Waterproof Paste 6 oz and (2) Large Shoe Shine Cloths.
  • TRUSTED BRAND: 100% Manufacturer Money Back Guarantee. Ideal for leather, vinyl and canvas shoes, boots, jackets, belts, bags, purses and briefcases - CAUTION: May Darken Light or Soft Leathers. Do not use on Suede or Nubuck.
Check Stock

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

Ferguson's (Beauregard's) SC Artillery Company

  • HEAT RESISTANT rubber up to 300c, glue to 70c and 8-inch boot height meet US federal standards for wildland firefighters, post-fire clean-up but not front-line firefighting..
  • DURABLE mountaineering style work boot that is tough enough for wildland, forestry, backpacking and trail building work.
  • Roughout leather upper block out moisture on the jobsite and in the backcountry.
  • LIGHTWEIGHT materials maintain breathability and keeps boot weight low without sacrificing the dependability fire fighters, Forest Service professionals, winter backpackers and thru hikers demand.
  • HALF STEEL SHANK protects your feet from sharp objects.
  • MtnFlex sole give just the right amount of comfort you won’t see in a heavy-duty boot.
  • VIBRAM ICE SOLE give you traction across mud, rocky terrain, sand and other conditions found while back packing or working in land management, wild land firefighting, forestry, BLM and hotshot crews.
Check Stock

Jack the Stripper / Fairies Wear Boots (2012 - Remaster)

  • 【EASY BOOT REMOVAL】: Boot Jack，allows for quick and easy removal of all kinds of outdoor footwear without bending over or getting your hands muddy..
  • 【High Quality Materials】: Boot remover constructed out of heavy-duty plastic, waterproof and UV resistant，survive all outdoor conditions, rain or shine..
  • 【WIDE TAPERED SLOT】: Boot Jack has a 3 inchs wide-open U shape and is designed to fit all kinds of Shoes & Boots including Cowboy, Rubber, Military and Work Boots..
  • 【Upgrade Design】:This Boot Puller has a wide-open U shape with a rubber lining which won't damage boots..
  • 【Tips】: During use, please hold the wall, post or sit on the chair to avoid falling..
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Earl Diamond Heavy Boot Puller Jack - Shoe & Boot Remover (Black & Brown)

  • PRODUCTION: Iron art, Handmade heavy duty beetle puller, cast iron reinforcement structure, modern look and durability..
  • BEETLE: Use to pry off muddy or snowy boots, hands / home gardening decoration artwork..
  • EASY TO USE: Convenient and easy to use, Boot Puller can help you take off your shoes or boots without bending over..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Milwaukee 48-22-6100 9 Inch Leverage Lineman Pliers w/ Crimper and Pipe Reaming Head Design

  • REAMING HEAD: You can fit into pipes up to 1 1/2“ in diameter to clean them out to help you conform to United States and International Plumbing Codes.
  • INTEGRATED CRIMPER for INS and non-INS terminals.
  • ONBOARD FISH TAPE PULLER provides maximum grip strength and ease of movement when pulling your cables.
  • IRON CARBIDE CUTTING BLADES will let you cut high gauge wires with ease with assistance from the long tool’s leverage.
  • RUBBERIZED OVERMOLD will not peel while you’re on the jobsite, so you can minimize risk to your hands and the tool.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

FootMatters Shoe Shine Valet Box – Hardwood Boot & Shoe Care – Polish Kit

  • Polish Kit Comes with: (1) Hardwood Shoe Shine Box (10.8 x 7.5 x 5.24 inches).
  • (2) Wooden Shoe Shine Brushes and (2) Large Shoe Shine Cloths.
  • (1) Jobsite Boot Polish Cream Black and (1) Polish Cream Brown.
  • CAUTION: May Darken Light or Soft Leathers. Do not use on Suede or Nubuck. TRUSTED BRAND: 100% Manufacturer Money Back Guarantee. Ideal for leather shoes, boots, jackets, belts, bags, and purses.
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...h-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance ....
Check Stock

Kodiak Women's Bralorne Composite Toe Water-Resistant Chelsea Industrial Boot, Medium Brown, 9

  • CLASSIC CHELSEA. Pull-on ease, Chelsea boot style and work boot protection—the perfect combo for taking on the job. A CSA and ASTM approved composite toe and composite plate, plus Electric Shock Resistance deliver maximum protection on the jobsite..
  • WATERPROOF LEATHER. These Chelsea-style work boots feature a water resistant construction made with premium, waterproof full grain leather that develops a rich patina with use. An abrasion-resistant lining supports durable wear..
  • ORTHOLITE COMFORT. These shoes feature Comfortzone footbed with OrthoLite comfort foam for all day cushioning. Kodiak SOS Smell Out Science technology helps keep shoes and feet fresh for a hard day's work..
  • SLIP RESISTANT. Made for many work conditions, this shoe has an oil and slip resistant, non-marking rubber outsole for great traction on any surface..
  • GENERATIONS COLLECTION. Born from six generations of craftsmanship, traditional materials with modern comfort create a collection that celebrates perseverance and resilience—knowing our best days are still ahead..
Check Stock

Dress Zipper Helper Zipper Puller Zipping Up Down Dress Yourself Zip Aid Tool Zipper Pull Assistant Zipper Pull for Dress (Black)

  • Dress zipper helper tool used to pull zippers on dresses and boot, help you to zip and unzip the dress by yourself.
  • Zipper puller helper suit for almost all dress zipper types(small and big zippers even on invisible zippers), makes garment easy to zip and unzip.
  • Dress zipper pull helper made of imitation pearl and metal,durable, elegant and sleek ,Length:70cm(29 inch).
  • Come with 1 pc zipper assist tool in a box.
  • Back zipper helper zip up any zipper stuff you can't help yourself, dress, boot, etc.
Check Stock