Categories

Best Joiner Knife Setting Jig

WEN 42704B 4-Piece Sharpening Accessory Kit for 10-Inch Sharpening Systems

  • Bring old, dull, and rusty blades back to life.
  • Includes a long knife jig, a short knife jig, an axe jig, and a scissors jig.
  • Compatible with the WEN BG4270 10-Inch Two-Direction Water-Cooled Wet/Dry Sharpening System.
  • Easy installation allows users to quickly change from jig to jig.
  • Universal design fits the majority of 10-inch wet/dry sharpeners on the market.
Check Stock

TR Maker Belt Grinder Knife Jig Knife Sharpener

  • TR Maker Belt Grinder Knife Jig, Knife Sharpener.
  • Adjustable bevel grinding jig for belt grinder Аngle bevel jig,knife sharpener.
  • Satin is produced in black, blue and yellow colors..
Check Stock

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

SCOTTCHEN Belt Grinder Knife Sharpener Jig Knives Sharpening Locator Tool Aluminum for Belt Sander Machine

  • 【Function】This sharpening jig can be used to sharpen the knife very conveniently, with high efficiency, saving time and effort..
  • 【Application】This knife sharpening locator can be adjusted to 90-135 degrees. Easy to use..
  • 【Material】The knife jig made of Solid Aluminum, will not rust, easy to clean and last long life. Acrylic base plate provide smooth sliding/moving left and right..
  • 【How to Use】Use a clip fix the knife handle, adjust the suitable angle, put the knife close to the belt grinder, move left and right, then repeat to sharpen the back side, a sharp knife is complete..
  • 【Good Service】Good product, fast shipping and 100% after-sales service!.
Check Stock

VEVOR Belt Grinder Knife Jig 9-4/5 Long Sharpening Locator 85°~ 115°Adjustable Angle Belt Knife Sharpener Jig w/Dual Handles Knife Making Angle Grind Guide for Belt Sander Machine - Large

  • Built for Last: As a processing assistant tool, our grinding jig, constructed of aluminum alloy frame, features durability and longevity for multiple....
  • Comfort & Convenience: Double ergonomic handles, being accessible operation properties, can enhance comfort during use. With knurled surface, these....
  • Adjustable Angle: The grinder knife sharpener measures 9-4/5'' in length, 3-9/10'' in width, 4'' in height. This grinding jig comes with a locking....
  • Easy to Sharp: We kindly provide a set of stainless steel screws for easy grinding of any size knife. In addition, we add an ABS plate at the bottom,....
  • Efficient Knife Making: With the advantages of easy use and strong practicality, this knife sharpens jig can satisfy your varied demands. It is ideal....
Check Stock

VEVOR Belt Grinder Knife Jig 7.75 Length Sharpening Locator 85°~ 115°Adjustable Angle Belt Knife Sharpener Jig w/Dual Handles Knife Making Angle Grind Guide for Belt Sander Machine Regular

  • Built For Last: As a processing assistant tool, our grinding jig, constructed of aluminum alloy frame, features durability and longevity for multiple....
  • Comfort & Convenience: Double ergonomic handles, being accessible operation properties, can enhance comfort during use. With knurled surface, these....
  • Flexible Angle: The grinder knife sharpener measures 7.75'' in length, 3.9'' in width, 3.4'' in height. This grinding jig comes with a locking knob....
  • Easy To Sharp: We kindly provide a set of stainless steel screws for easy grinding of any size knife. In addition, we add an ABS plate at the bottom,....
  • Efficient Knife Making: With the advantages of easy use and strong practicality, this knife sharpens jig can satisfy your different demands. It is....
Check Stock

Logan Graphics Model F300-1 Studio Frame Joiner with One Package of 200 Logan 3/8 (10mm) V-nails Logan Framing Tool Hardware

  • Logan's manually operated V-Nail Frame Joiner makes V-nailing frames together affordable for everyone..
  • All purpose picture framing joiner designed for light duty framing by the artist, professional or hobbyist-anti-slip pad protects frame moulding face..
  • Drives single v-nail, one at a time, into hard and soft woods by manual lever operation with magnetic nail holder..
  • Joins frames simply and accurately every time for a perfect corner-steel post sleeves prevent flexing..
  • Quick depth setting adjustment and drives all V-nail sizes for extra versatility..
Check Stock

AOBEN 8.5 Amp Biscuit Cutter Plate Joiner with No 0 Wood 30 Pcs No 10 Wood 30 Pcs No 20 Wood 50 Pcs 4 Tungsten Carbide Tipped Blade Adjustable Angle and Dust Bag

  • ♕ TYPES OF JOINT：1. Corner Joint，2. Mitre Joint，3. Frame Joint，4. Centre Wall Joint，5. Butt Joint，The Biscuit Jointer Is Suitable For Joints In Solid Wood,Plywood,Chipboard,Fibreboard, Plexiglas And Artificial Marble, Etc. From 8 mm (5/16 in.) Material Thickness..
  • ♕ DUST COLLECTION： Fit The Dust Bag To The Joiner With A Simple Push On Connection. With A Suction Function That Operates While The Biscuit Joiner Is In Use, It Will Keep The Working Area Clear From Flying Debris, Giving You The Best Possible View..
  • ♕ SPECIFICATION：Blade Diameter: 4”，Cutting Speed: 11,000rpm，Groove Width: 5/32 Inches，Amps: 8.5A，Weight: 7.6lbs，Dimensions:17” X 14” X 5” inches..
  • ♕ PRE-SET BISCUIT SIZES：For Convenient Use, The Biscuit Joiner Features Pre-Set Stops For The Most Common Biscuit Sizes – 0, 10, And 20. There’s Also An ‘M’ Setting, Which Puts The Tool In Manual Mode To Allow You To Cut To Custom Depths..
  • ♕ EASY OPERATION AND 2 YEARS WARRANTY: The Adjustable Tilt Fence Can Be Locked In Position Anywhere From 0° To 90° – If you have any questions about the product, please feel free to contact us and we will provide you with 100% satisfactory solutions..
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ...t will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Glow Squid Jig Hooks Saltwater Fishing 8pcs/Bag Luminous Squid Jigs Shrimp Prawn Lures Set Fluorescent Squid Cuttlefish Sleeve Jig Artificial 3D Octopus Jigs

  • LUMINOUS: Squid jig Hook made by luminous body, glow in the dark to attract squid after absorbing light. The luminous time of our fluorescent squid....
  • SHARP&DURABLE: Squid jig hooks come with dual-layer sharp split hooks make it more strong and sharp,best choice to catch squid..
  • KNIFE-SHAPED DESIGN&RING: The connecting ring of the squid jig is completely closed, firmer and stronger. Knife-shaped design on shrimp head will....
  • TARGETED: Great for catching fish like squid, octopus, cuttlefish and sleeve-fish in freshwater or saltwater..
  • LIFELIKE SQUID JIG: Mixed bright colors, 3D artificial fish eye and silicon legs design are more realistic in sea water, which can attract squid....
Check Stock

Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools

  • ...rt into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money..
  • The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders..
  • Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease..
  • Parting tools are sharpened using the platform. Laying it flat on its side on the platform gives a slight hollow grind which is very desirable for clean parting. The Wolverine's Vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment (not included). With a finely dressed 80 or 120 grit wheel, even very small carving tools can be ....
Check Stock

CKG Electric Knife Making Belt Grinder Angle Sharpener Grind Machine Guide Adjustable Professional Knife Grinding - 8" Bevel Jig 200mm

  • : Our belt grinders for knife making is one of the world’s oldest crafts, and while man started out with sharpened stones to get the job done, over time knife making has evolved into an art form of supreme caliber..
  • : Our jig grinder angle is built for knife making for grinding bevel angles on a knife blade and blank grinding. Using the belt grinder jig relieves strain from the hands and improves grinding precision.Bottom is polished, slides smoothly on working table..
  • : knife making isn’t a material that’s always clean and clear. Belt knife grinder there is always the chance of unwanted paint or residue on a surface, and using abelt grinder will maintain the finish of the surface while getting rid of the residue..
  • : Belt grinders are easy to use and quickly give your materials the finishing touch you have been looking for. Knife grinder can give you the shape and smooth surface of your knives with minimal effort on your part, as long as you avoid tilts and use minimum pressure..
  • : Finding the belt grinder for knife making means that you are looking for something that is quic....
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock