Categories

Best Joint Angle

Regrout Tool Replacement Tip Flat

  • 【3 IN 1 CAULKING TOOLS】 This caulking tool combine 3 functions into 1 including silicone smoother, flat angle scraper, internal angle scraper.It's an good tool for most silicone jobs, any edge, corner, joint..
  • 【5 REPLACEABLE SILICONE SMOOTHER】 Replaceable 5 silicone pads including 3R,6R,10R,13R,17R radius..
  • 【WIDE APPLICATION】 The caulking tools can use for home, kitchen, bathroom, tank, window, sink joint and so on. Easy to clean with a damp cloth and reuse..
  • 【TWO MODE SCRAPERS】 Silicone trowel to remove surface bumps and dents, stainless steel scraper remove stubborn old glue, Sliding switch design, easy to switch between trowel and scraper..
  • 【VALUECUSTOMER EXPERIENCE】 PXShpot provide good service for our customers, if you're not thrilled with its performance, please let us know..
Check Stock

Nurge Adjustable Embroidery Table Stand, Cross Stitch Stand, Embroidery Hoop Holder. Hand Polished Natural Wood.

  • The Nurge adjustable embroidery seat stand 190-1 is made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. They are the crafter’s choice for quality..
  • It is height adjustable joint (minimum height 32cm ( 12.6″), maximum height 48cm (19″) The seat embroidery stand allows easy embroidering using both hands..
  • It can be used as a table-top stand but is ideally designed to be a seat stand by sitting on the lower base tucked under your legs allowing comfort and creativity at the same time..
  • The stand has a height-adjustable joint (minimum height 32cm ( 12.6″), maximum height 48cm (19″), plus a hoop holding knuckle joint that will pivot to any angle so that you can find the optimum height, distance and angle depending on your hoop size for maximum comfort while creating your next masterpiece.
  • Size - 190-4 Model : The stand will fully extend out to a height up to 53cm (21″). The base is 39cm (15″) x 21cm (8.3″)..
Check Stock

kemimoto UTV Side Mirrors And Center Mirror with 1.75

  • UTV Side MirrorsThese UTV side view mirror dimenions are 3.7" wide by 7.5" tall, with a sleek and stylish design that looks great on all UTV's and big enough for maximum view, even over harsh terrain and whoops..
  • UTV Center Mirrors - Non-slip ball joint, 360-degree rotation to adjust your view angle. This UTV mirror can gives good angle of rear view you could see everything that was coming up, easy to adjust and easy to install..
  • Convex Design Mirror - This RZR pro r mirror provides more viewing range for you to easily to prevent blind spots and some traffic accidents, which can improve your safety greatly..
  • Wide application - These utv side mirrors Fits almost all UTV"s with a 1.6" - 2" diameter round tube roll cages - Compatible with RZR, Kawasaki Pioneer and Can Am. Not Compatible with Polaris Ranger XP1000 XP900, Pioneer 700/1000..
  • Breakaway FeatureHigh impact ABS housing, adjustable ball socket joint for maximum adjustment, along with a "breakaway" feature and shatter-proof tempered glass.Picture 2 is the way to adjust the mirror angle..
Check Stock

IRWIN Tools VISE-GRIP Groove Joint Pliers, Straight Jaw, 16-Inch (2078516)

  • IRWIN VISE-GRIP pliers feature a durable nickel-chromium steel construction.
  • Dipped grips provide extra comfort and help reduce hand fatigue while using the IRWIN pliers.
  • Right-angle teeth grip in all directions for maximum bite.
  • Groove-joint pliers have 9 jaw positions.
Check Stock

Pocket Hole Jig Kit Dowel Drill Joinery Screw Kit Carpenters Wood Woodwork Guides Joint Angle Tool Carpentry Locator

  • Pocket Hole Jig Kit is made of high quality and solid metal materials, will not rust or crack, and can easily drill oblique holes to make the joint perfect. At the same time, this fixture can create flush, angle and angle shapes Pocket hole connector for connecting legs and guide rails, building cabinets.
  • Mini pocket hole jig 850 heavy duty compact pocket hole jig can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15° drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently wi....
Check Stock

Corning Pyrex Vacuum Distilling Two-Way Joint Adapter with Extended Drip Tip, 105 degree Angle (Case of 6)

  • With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom.
  • O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint.
Check Stock

Performance Tool W54225 90° Coupler For 1/8” Thread Grease Gun Connections

  • ☞ [90 DEGREE DESIGN]——This grease gun coupler is designed for 90 Degree Angle, which makes it easy for you to connect some difficult joints in small space where grease is difficult to reach zerk joint. It is the 3-claw joint design that makes it easier for you to break the grease joint..
  • ☞ [SPRING SLEEVE LOCK]——The spring loaded sleeve locks the coupler in place, and strengthens the connection between the straight coupler and the angle coupler, preventing air leakage and making grease filling more efficient..
  • ☞ [WIDELY USED]——The 90 Degree Grease Coupler is suitable for agricultural or industrial use, compatible with cars, trucks, agricultural equipment and other hard-to-reach grease accessories. It can also be used with most manual grease guns in the working pressure range of 3000-4500 PSI..
  • ☞ [DURABLE TO USE]——It is made of high quality carbon steel and has a galvanized finish to prevent corrosion to the greatest extent. This treatment makes it durable and hard to break, extending the service life and allowing you to use it for a long time..
  • ☞ [WHAT YOU GET]——The package includes 2 * Silver Coupler Adapters and 2 * Sleeves. If you have any quality-related problems after receiving the item within 6 months, you can cont....
Check Stock

Heavy Duty Camera Car Windshield Mount with 1/4-20 Adapter for GoPro Hero Series and All Cameras

  • Broad Use: Suit for any cameras/recorder/camcorder with 1/4-20 mounting pattern such as Sony, GoPro Hero 9 8 7 6 5 4 3+ 3 2 1, Garmin Tom Tom, Nikon,....
  • Multi-functional Camera Mount: It would be easy to stick on car windshield, glassware, window and any flat and smooth surface.
  • Multi-angle Adjustable: Adjustable arm locked design,extendable height,and ball joint head,ensure the best shooting angle..
  • Large Durable Suction Cup: It made by TWO LAYER TPU material which ensure it can be stick securely on windshield.
  • High Quality Raw Material: We use Raw ABS+PC and metal ball joint in order to be more durable while outdoor strenuous exercising,all our products....
Check Stock

Freedom OffRoad Front Upper Control Arms for 2-4” Lift 1999-2006 Silverado Sierra

  • 2011-Up GM 2500/3500HD xtreme-duty fabricated upper Control Arms.
  • Correct ball joint pivot angle for lifted or leveled applications.
  • New heavy-duty spring Loaded ball joint for maximum long-lasting durability.
Check Stock

Magnetic Phone Holder for Car [Super Strong Magnet & Never Block View] Dashboard Windshield Upgraded Suction Cup Car Phone Holder Mount Fit for All Cell Phone Handsfree Cell Phone Automobile Cradles

  • [Never Block View or Vent]:The phone holder for car with a highly flexible 360° rotated ball-joint and the unique 135° angle (can be adjusted forward and outward 135°), makes the car mount truly flexible & face you as you wish..
  • [No Need to Install]: No tedious installation process & learn the complex instruction, just put the phone mount for car where you want & save your good time.
  • [Upgraded Version Phone Mount for Car]: With 3M sticker and strong suction cup, the car mount for phone provides reliable adhesion in high temperature.
  • [Ideal Viewing Angle]: A 360°rotating and pivoting ball joint allows you to adjust to the best viewing angle and quickly switch between portrait and landscape view.
  • [Easy Operation]: No need to press any button, just lift the phone slightly to take away. Come with 1 rectangle & 2 round metal plates, make the car phone holder fits for all cell phones with a thick case.
Check Stock

Wilmad-LabGlass LG-4890-102 Friedrich Condenser, Standard Taper 29/42

  • The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer.
  • With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°.
  • The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size.
Check Stock

Wilmad-LabGlass LG-4890-101 Friedrich Condenser, Standard Taper 29/26

  • The spiral inner tube contains the coolant which fits closely within the jacket so vapor must pass along spiral in a thin layer.
  • With Standard Taper outer joint attached to upper end jacket and extending upward at an angle of 15°.
  • The bottom of condenser has a Standard Taper inner joint with a drip tip of the same size.
Check Stock

Mecurate Miter Saw Protractor, Inch/Metric Miter Protractor with Bobble Level, Miter Cut and Single Cut for Crown Molding

  • 【Accurate & Durable 6" Angle Finder】Made by durable ABS plastic, the protractor with accurate laser engraved scales and level bubble. Reliable to measure accurate angles for crown molding and a variety of other carpentry applications..
  • 【Two Measures, One-glance Conversion】The angle finder is featured with inside & outside scales to measure angle for single cut and miter cut. The angle conversion table on instruction converts right angle to your miter saw..
  • 【O-ring Design, Make Right Angle】The O-ring mechanism is full 360 degrees rotation, easliy to adjust and capture angle measuring. 6" angle measuring tool, Easy to carry and store..
  • 【Combination for Functions】Integrated with spirit level, ensure to hold the protractor on same plane to get accurate angle. Inch / CM combination enables quick measurement.
  • 【Versitility, Won't Miss Out】No matter trim widow & door, or cut tight-fitting joints, this carpenter tools measure angles to get right joint surface. It's essential for carpentry, molding, plumbing and metalworking..
Check Stock