Categories

Best Juki 760 T axis Motor

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Juki DDL550 LockStitch Industrial Sewing Machine Table,servo Motor,lamp,Made in Japan DIY

  • Specifications SPEED: 200-3700 spm MAX STITCH LENGTH: 5mm MAX PRESSER FOOT LIFT: 10-13mm LUBRICATION TYPE: Automatic (oil bath type) NEEDLE TYPE:DBX1 #11~#14.
  • Siruba's newest lockstitch plain machine is a smooth, quiet, power efficient industrial straight stitch Plainsewer 003e DIRECT-DRIVE NEEDLE POSITIONING LOCKSTITCH MACHINE. 003e MECHATRONIC INTEGRATION WITH BUILT-IN CONTROL BOX AND CONTROL PANEL. IT IS EASY TO INSTALL AND OPERATE. 003e DIRECT-DRIVE SERVO MOTOR (110Volts) IS SPEEDY, ACCURATE, AND ENERGY-SAVING THAN CLUTCH MOTOR BY 60%. 003e USER FRIENDLY: EQUIPPED WITH LED LIGHT, BUILT-IN BOBBIN WINDER, AND HALF STITCH FUNCTION..
  • Product Type Direct-Drive Needle Positioning Lockstitch Machine WHAT'S IN THE BOX : SIRUBA DL720-M1 machine head + TABLE STAND PLEASE NOTE! WILL BE DELIVERED UNASSEMBLED, will be delivered in 2 boxes, no detailed instructions for assembly. Highly Recommended to have a sewing technician to set up the machine..
  • The Presser Feet are compatible with VIRTUALLY ALL High-Shank, Single-Needle Industrial Sewing Machines, including:JUKI Style INDUSTRIAL Single Needle (DDL-8300 8500 8700 AND OTHERS) Sewing Machines ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SINGER TAIKO..
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Yamata Industrial Sewing Machine FY-8700 Lockstitch Sewing Machine Ergonomic Chair +Motor + Table Stand + LED Lamp Commercial Grade Sewing Machine for Sewing All Types of Fabrics (DDL-8700)

  • ✅ASSEMBLY REQUIRED, please note machine comes unassembled, with sewing machine table and Electronic 550 watts Energy saver and Quite Running DC Servo Motor. ✅Included accessories in the machine Juki DDL head: : Bobbin Winder Thread Stand Machine Oil Instruction Manual Oil Pan Knee Lifter V Belt.
  • ✅Juki DDL serie Single Needle Lockstitch Industrial Sewing Machine dont have the walking foot mechanisms. ( NOT a walking foot).
Check Stock

Tutto Machine On Wheels (Blush Pink Diamond, 20-Inch)

  • This Juki Cording Presser Foot for MO-1000 and MO-2000 sergers is an original Juki accessory..
  • Use the Juki Cording Presser Foot for MO-1000 and MO-2000 sergers to attach cording to your garments for a professional look..
  • The Juki Cording Presser Foot for MO-1000 and MO-2000 sergers is compatible with both the Juki MO-1000 and MO-2000 sergers..
Check Stock

Promaster 25ft Remote Extension Cable for Kodak Carosel Slide Projectors

  • Please check your Amazon's messages for Repair manual/Video instructions after ordering this item. If your projector have focus issue and does not advance then this repair kit will solve both problems..
  • This Repair Kit compatible with many different models such as Kodak Carousel Slide Projectors 750, 750H, 760, 760H, 800, 800H, 850, 850H, 860H and Ektagraphic AF-1, AF-2, AF-3 and B2 models..
  • This repair kit contains 1 link, 1 focus motor gear, 1 gear next to the focus motor, 1 lock pin and instructions. (Note: instruction will be provided via Amazon message).
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

CNCMOTOK NEW SMU6008 Starter Solenoid Relay Fit For Yamaha Waverunner 500 650 700 GP760 GP1200 WJ500 SJ650

  • Compatible with Yamaha WaveRunner GP760 GP800 GP1200 WR500 WRA650 WRA700 WR650 WRB700 SV1200 SJ700 SJ650 WRB650 XL700 XL760 XA800 XL1200 XA1200A Yamaha WaveBlaster WB700 WB760 Yamaha WaveRaider RA700 RA760 RA1100 Yamaha WaveVenture WVT700 WVT760 WVT1100.
  • Meets OEM specifications Engineered to fit and perform just like the original solenoid in your vehicle.
  • Quality Construction High grade wire coils and mobile core for quick, efficient starts.
  • Replaces the following OEM numbers: Compatible with YAMAHA 6G1-81941-00-00 68V-8194A-00-00 6G1-81941-00 6G1-81941-10-00 6G1-81941-10 / MERCURY 89-825096T 89-825096T01 / ARCTIC CAT 3008-165 3008-106 / SUZUKI 31800-94401.
  • Regarding after-sales, if you have any questions about compatible models or product quality, you can contact us. Product lifetime warranty..
Check Stock

Repair Kit for Kodak Carousel Slide Projector with Focus Motor - Does Not Advancing

  • Please check your Amazon's messages for Repair manual/Video instructions after ordering this item. If your projector have focus issue and does not advance then this repair kit will solve both problems..
  • This Repair Kit compatible with many different models such as Kodak Carousel Slide Projectors 750, 750H, 760, 760H, 800, 800H, 850, 850H, 860H and Ektagraphic AF-1, AF-2, AF-3 and B2 models..
  • This repair kit contains 1 link, 1 focus motor gear, 1 gear next to the focus motor, 1 lock pin and instructions. (Note: instruction will be provided via Amazon message).
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ...mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the mac....
Check Stock

Juki Bobbin Case for TL Series Sewing Machines

  • Authentic Juki brand package of 5 plastic drop-in bobbins for all Juki household sewing machines except TL series..
  • Use with Juki Models: -HZL F600 -HZL F400 -HZL F300 -HZL G210 -HZL G110 -HZL K85 -HZL K65 -HZL 35Z -HZL 29Z -HZL 27Z.
Check Stock

INJORA RC Brushed Motor 050 50T Pro High Torque Motor with Motor Mount for SCX24 Gladiator Bronco C10 JLU Deadbolt Axial 1/24 Crawler Upgrade Parts

  • The new upgrade, a larger 050 size brushed motor option for the Axial SCX24..
  • 050 Motor PRO provide increased power and torque compared to the stock motor.
  • Rotor with a strong structure guarantees outstanding performance and super durability.
  • High Torque Strong Magnet, tuned for Rock Climbing.
  • Fits for Axial SCX24 Gladiator AXI90081 AXI00002 AXI00001 and so on.
Check Stock