Best Kapton Polyimide Film
4 PCS Film Heater, Icstation PI Heating Film 12V 7W Adhesive Polyimide Heater Plate 25mmx50mm
- 【Fast Preheating Speed】Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable..
- 【Extremely Thin】Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments..
- 【Safe to Use】Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance..
- 【Durable】Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process..
- 【12V Polyimide Heater Film】 Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100℃..
Check StockGizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 9 Inches x 100 Feet
- Superior quality Kapton polyimide tape for 3D printing.
- Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS.
- 3D prints adhere very well especially under high heat but release cleanly when cooled.
- Great durability for multiple print cycles without needing to change the tape.
- Long lasting tape roll that is 9 inches wide by 100 feet long.
Check StockGizmo Dorks Kapton Tape Polyimide for 3D Printers and Printing, 9 x 12 inches, 10 Sheets per Pack
- Superior quality Kapton polyimide tape for 3D printing.
- Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS.
- 3D prints adhere very well especially under high heat but release cleanly when cooled.
- Great durability for multiple print cycles without needing to change the tape.
Check StockMG Chemicals - POL100-15 Polyimide Tape for 3D Print Beds, High-Temperature, 4' Width x 49' Length
- Superior quality Polyimide tape for 3D printing of ABS Filaments. Use for multiple prints before having to change the tape..
- High temperature tape for filaments requiring heated build beds.
- Apply an ABS Slurry to the tape so your ABS prints stick to the heated bead..
- Polyimide tape has 1 mil of Polyimide film with 1 mil of silicone adhesive.
Check StockGizmo Dorks Kapton Tape (Polyimide) for 3D Printer Build Plate, 10 x 10 inches, 10 Sheets per Pack
- Superior quality Kapton polyimide tape for 3D printing.
- Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS.
- 3D prints adhere very well especially under high heat but release cleanly when cooled.
- Great durability for multiple print cycles without needing to change the tape.
- Dimensions of 10 x 10 inches, can be cut to size easily with an easy to peel backing.
Check StockIcstation 12V 12W Flexible Polyimide Heater Plate Adhesive PI Heating Film 10mmx93mm
- 【Warm tips】These new heater films are going to supply in pack of 4pcs, but very sorry that we mixed with some independent Packing. If you purchase 4pcs but only get 1pc, please contact with service team freely, we will resend to you for free or refund as a compensation as per your request. The rest inventory is on sale, until new packages restock. Thanks a million for your kindly understanding!.
- Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process..
- Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments.
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
- Equipped with self adhesive can be fixed on the item surface easily. Working Voltage: DC 12V, Power: 12W, Film Size: 93 X 10mm/3.66 X 0.39inch(L*W), Maximum Temperature: about 170℃ Ship out by USPS with tracking information and 7-15 days delivery time usually.
Check StockHigh Temp Tape, ELEGOO 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8’’, 1/4’’, 1/2’’, 1’’ with Silicone Adhesive for Masking, Soldering etc.
- High Temp Tape, Elegoo 4 Pack Polyimide High Temperature Resistant Tape Multi-Sized Value Bundle 1/8’’, 1/4’’, 1/2’’, 1’’ with Silicone Adhesive for Masking, Soldering,.
- HN Polyimide polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range.
- With silicone adhesive for easy release and leaves no residue after peel away.
- High performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties.
- Wide range of applications for masking circuit boards, soldering ,electrical insulation and splicing wires.
Check StockHigh Temp Tape,AIYUNNI(2 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.
- ✔High Temp Tape Dimension:50mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
- ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
- ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
- ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
- ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check StockHigh Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.
- ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
- ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
- ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
- ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
- ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock5 Rolls 20mm x33m(108ft) Heat Tape High Temperature Heat Resistant Tape Heat Transfer Tape Thermal Tape Sublimation Tape Heat Vinyl Press Tape Up to 260℃(500℉) for Soldering Circuit Board, No Residue
- [HIGH-TEMPERATURE RESISTANT] - Our heat resistant tapes for sublimation are polyimide film tapes provide heat resistance up to 260℃, reliability and durability, Heat resistance: short period heat resistance: 260℃(500℉).
- long period heat resistance: 220℃(428°F).
- [REASONABLE SIZE] - The heat resistant tape is 20mm/0.8 inches in width and 33m /108ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
- [WIDELY USED] - The heat tape for heat press is not only suitable for sublimation on cups and heat transfer vinyl, but also for protecting electrical wires,electric motor,soldering, 3D printing, PCB boards, electrical insulation, high-temperature powder coating and other DIY projects.
- [STRONG ADHESIVE] - The heat transfer tapes are made of polyimide film with silicone adhesive, it is easy to stick, not easy to break while peeling and leaves no residue after peel away. Works well in coffee mug press, heat press, T shirt application or other thermal transfer printing.
- [MEET YOUR NEED] - Package includes 5 rolls heat press tapes. ★ If you have any questions about the ....
Check StockMishimoto - MMGRT-235 Heat Defense Heat Protective Tape - 2\ x 35' Roll Metallic Gold
- Constructed of highly reflective metalized polyimide film.
- Reflects heat and protects sensitive engine components from high temperatures.
- Temperature resistance: 675 degree Fahrenheit continuous.
Check StockDekoni Audio Blue Fostex/Dekoni Audiophile HiFi Planar Magnetic Headphone
- The only T50RP MK3 Mod sanctioned by Fostex.
- Refined Fostex proprietary Regular Phase (RP) diaphragm driver using copper foil etched polyimide film and powerful neodymium magnet.
- Maximum input level of 3000mW to comply with various professional uses.
- Dekoni Hybrid ear pads provide comfort and a warmer, smoother sound.
Check StockHigh Temperature Kapton Tape, Professional for Protecting CPU, PCB Circuit Board…
- MYJOR heat transfer tape is made from polyimide film, High tensile strength.
- High temp tape that is fit for SMT high temperature protection, good stability.
- Heat tape for heat press tape work well in protecting electronic products, for 3D Printing, Soldering, Masking, etc.
- Temperature range of heat resistant tape from Long-term temperature 500 ℉(260℃) to Short-term temperature 536 ℉(280℃).
Check Stock