Categories

Best Keeyees Professional 3d Printer Cnc Kits

KeeYees Professional 3D Printer CNC Kit with E-Tutorial - CNC Shield Expansion Board V3.0 R3 Board A4988 Stepper Motor Driver DC Power Cable Mechanical Switch Endstop with Jumper caps

  • ★ Stable performance ★ A4988 Driver Chip is low power consumption and will not be too hot during use. The performance is more stable than DRV8825....
  • ★ DC Power cable ★ The DC power cord can quickly connect to the DC power adapter and power the CNC shield board. Save time and more securer cable....
  • ★ CNC Shield ★ This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988....
  • ★ With 20 Pcs Jumpers ★ When setting up CNC projects, jumper caps are necessary accessories. There are 20 of them in the kit, enough for most....
  • ★ Reliable technical support ★ Please visit github (github: Keeyees/KY-102) to get relevant information or can contact us on Amazon, we will send....
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

HICTOP Supporting Rod Set for Creality 3D CR-10 CR-10S 3D Printer Upgrade Parts

  • New version support rod upgrading kits for 3D printer Compatible with Creality CR-10/CR-10S/CR-10 S4, TEVO Tornado. reduces the vibration made by....
  • All wrapped up in a kit! It will make your 3D printer more stable and professional..
  • Durable and well appointed, package included all the necessary parts for supporting rod set, this frame support kit will satisfy your requirement to....
  • This cr-10 support rod is by far the easiest rods to install. It holds the printer pretty solid so you can printer super tall prints and not worry....
  • This kit is an all metal construction including the L brackets very strong. It's a great product and does what it's supposed to add rigidity to your....
Check Stock

JW Winco A8330221 B10 V8 AN605 PHOTOCELL CLAMP Plastic

  • Application: Used for building industrial aluminum frame structure, 3D printer, CNC router, CNC cutting machine, etc..
  • Easy to Install and Use: The end cover is easy to install and use, and can be easily fixed with screws.
  • Aluminum Alloy: The end cover made of high quality aluminum alloy, the surface is anodized, and will not fade.
  • Elaborate Production: Elaborate processing, this 8080 double slot end caps is beautiful and top grade.
  • Professional Uses: This is 8080 double grooves end caps, which for profiles end caps.
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

ANYCUBIC Photon Mono SE Resin 3D Printer, UV LCD SLA 3D Printer Ultra Fast Printing with 6' 2K Mono Screen and WiFi Function & Dual Z-axis Linear Rail, Print Size 5.12'(L) x 3.07'(W) x 6.29'(H)

  • ...right side of the platform.Then ready for your printing.
  • Better Heat Dissipation System, Anycubic Photon Mono SE 's UV Cooling System has exclusive UV heat dissipation channel, efficient cooling, improving printing quality and service life. All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

SOOWAY 36 pcs 3D Printer Tool Kit Includes Remove Tool Cleaning Tool Sanding and Hot end Disassembly Tool 3D Print Accessory Sets 3D Model Tools for 3D Printing and Finishing

  • 【Full set of 3D printer tool kits】Contains various tools during the 3D printing process, which can be used for cleaning the nozzle and platform....
  • 【High value performance kit】Package includes: 1 x Carving set, 1 x shovel (sharp edge with wood handle), 1 x wire cutter, 10 x sanding rod, 10 x....
  • 【Valuable 3D tool kit】This tool set includes high-quality stainless steel shovel with wood handle and sharp edge which you can easily removal a....
  • 【Great gift for modeler】This tool kits includes all kinds tools for 3D printing, DIY and Makers, It’s a great gift for your friend which had a....
  • 【Warm Note】Please feel free to contact us for refund or replacement if there any issues, Thanks for choosing our 3D printer parts, have a nice....
Check Stock

WMYCONGCONG 10 PCS Endstop Mechanical Limit Switch with Cable for 3D Printer Mega 2560

  • Mechanical endstop limit switches with 22AWG Cable for 3D Printer Mega 2560 1280..
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s).
  • Easy to install, common styles, replacement endstop for RAMPS 1.4, CNC and other 3D printer controllers..
  • Package Content: 10 * Mechanical Endstop Limit Switch with Cable..
Check Stock

DZS Elec 6pcs Mechanical Endstop Limit Switch Touch Switch Module for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 RAMPS 1.4 LKB01

  • Mechanical endstop limit switch kit, suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used....
  • High quality 70cm 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating....
  • One-piece plug design, easy to install, hard to snap, convenient to plug or release..
  • Connection: Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s).
  • Common used 1A 125V AC limit switch, strong universality, can be used as switching terminal element of RepRap 3D printer, CNC machine, Arduino / Mega....
Check Stock

3D Printer Parts Gear Grease Reduce Noise Good Lubrication Effect Lubricating for Creality CR-10 Ender 3 Series Ender 5 T8 Screw Optical Axis CNC Machine Guide Rail Other Transmission Systems 3pcs

  • Made of high quality materials, non-toxic, tasteless and easy to use..
  • Suitable for 3D printer and engraving machine screw, optical axis, guide rail, and other transmission systems..
  • Anti-rust, smooth function. Silent work, protection for 3D printer..
  • 3D Printer Parts Gear Grease Reduce Noise Good Lubrication Effect Lubricating Oil CNC Machine Guide Rail for Creality CR-10 Ender 3 Series Ender 5....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Creality Original Updated Flexible Couplings 5mm to 8mm NEMA 17 Shaft for CR-10S Ender 3 PRO 3D Printer and CNC Machine（4PCS）

  • Perfect fix Ender 3,Creality CR-10S series 3D Printer and other NEMA 17 stepper motors (for 5mm to 8mm shaft diameter).
  • Useful in RepRap 3D Printers and small CNC machines..
  • Note:It's the same as Ender 3 and Creality CR-10S series 3D Printer Flexible Couplings.
Check Stock