Categories

Best Keyless Bushing Pulley

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • ...rength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also as an efficient general-purpose pulley, the fixed micro pulley excels in redirects of rigging configurations, DIY pulley rope fitness home gym, hauling and dragging mechanical advantages systems..
Check Stock

GM CLIMBING Pack of 2 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • ...rength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also as an efficient general-purpose pulley, the fixed micro pulley excels in redirects of rigging configurations, DIY pulley rope fitness home gym, hauling and dragging mechanical advantages systems..
Check Stock

GM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))

  • ... pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik minding pulley) to be integrated into the progress capture on the haul system, and prevent brake hitches to be sucked into the pulley, for a more efficient haul..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Most seen its functions in haul systems, tending hitches in climbing techniques. Also as an efficient general-purpose pulley for daily use, DIY pulley rope fitness home gym, suspending your bike in the garage, tensioning system for you slackline, and more..
Check Stock

TB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL2517138 Taper Lock Bushing, Cast Iron, Inch, 1.375\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock