NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set
- 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
- 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
- VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
- HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
- CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..
Check StockXT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing
- 30pcs thread repair tool kit: The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs..
- High quality control: Made of precision high-speed steel for strength, wearproof and durability..
- Easy to install: 1.Drilling - drill out the damaged threads using correctly sized drill bit provided 2.Tapping - Tap re-drilled hole using tap supplied (Cutting oil recommend) 3.Install the insert - place insert on installation tool and position the adjustable ring clockwise.4.Tang removal - remove the tang use the break tool..
- Wide application: Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged..
Check Stock
6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.
- COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
- HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
- you can use the in aluminum, plastic, and so on.
- Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
- HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
- EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
- Back taper exceeds the tap to prevent over-drilling and damage to the thread..
- WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock
Case Compatible with Klein Tools ET310 AC Circuit Breaker Finder, 80041 Outlet Repair Tool Kit & RT250 GFCI Receptacle Tester, Electrical Tools Storage Organizer Holder Bag for Accessories (Box Only)
- Case for circuit breaker finder with professional design: Electrical tester case is specially design for klein et310 breaker finder, also for klein tools 80041 outlet repair tool kit with RT250 GFCI receptacle tester, with zipper mesh pocket for circuit breaker leads, for circuit breaker finder accessory kit. For klein tool bag dimension: 9 x 3.5 x 3.4 inches..
- Storage case for klein circuit breaker finder with comprehensive protection: Digital breaker finder storage holder for klein tools electrician tools is made of excellent and very durable EVA material, which is shockproof and dust resistance, Skid-proof, against impact and drop-proof, moisture-proof. Holder for klein circuit tracer can protect for electric circuit tracer from scratching, damaging. Please feel free to use because of the premium material for klein tools storage case..
- Compact design for circuit breaker tester case: Firm and smooth zipper for klein tools circuit breaker finder storage bag is easy for opening and closing. The gfci tester storage organizer is easy for you to distinguish for klein et310 breaker finder or for circuit breaker adapters when open this electrical tester case. Case for klein tools et310 circuit finder help organize and store for klein breaker finder kit....
Check StockE-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces
- THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
- AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
- FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock
ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs
- ...M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
- [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
- [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
- Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
- [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
- Includes bottom recesses for organizing the coils in included plastic bags.
- [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
- Load the thread insert into installation tool.
- Use the breaking pin tool to remove tang from insert.
Check StockTEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
- Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
- Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
- One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check StockIrwin Tools Tap and Drill Sets, 13-Pieces
- This tap and drill bit set produces a thread that is strong and easy to tap.
- High-carbon steel plug taps are great for general-purpose threading.
- 135° split-point drill bits give fast, precise drilling.
- Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check StockH.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric
- 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
- 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
- 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
- 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock
6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case
- COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
- No more using a drill to drill the hole and then tapping it out later with another tool..
- HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
- HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
- you can use them in aluminum, plastic, wood and other thin soft material metal panel.
- When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
- EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
- Back taper exceeds the tap to prevent over-drilling and damage to the thread..
- WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock
Case Compatible with Klein ET310 Tool AC Circuit Breaker Finder 80041 Outlet Repair Tool Kit RT250 Integrated GFCI Receptacle Tester and Accessories Electrical Tools Bag Storage Organizer
- Perfect Fit For: This case is specially design for Klein tools ET310 ac circuit breaker finder with integrated GFCI outlet tester, electrical tools case also fits for klein tools 80041 80016 Outlet Repair Tool Kit, RT250 receptacle tester, size: 8.25 x 5.25 x 2.7 inches. For sale is case only, not include the device and other accessories..
- Comprehensive Protection: Circuit breaker finder bag is made of premium and extremely durable hard EVA material, which has a good waterproof and moisture-proof effect. Case for klein circuit tracer can protect for klein et310 from scratching, damaging, impacting, and falling. Please be assured use because of the hard material for klein tools storage case..
- Reasonable Internal Mesh Pocket and Elastic Band Design: Zippered mesh pocket for klein circuit breaker finder case can protect circuit breaker finder accessory kit, circuit breaker leads, circuit breaker adapters from falling and losing. At the same time, the internal independent elastic band is specially designed for et310 klien and outlet tester. Don’t worry about the suitability for et310 klein tools. Elastic band has the function of shrinking and thick elasticity..
- Compact and Convenient Design: Strong and classic zipper for klein breaker finder storage bag i....
Check Stock
Case Compatible with Klein Tools 80041 Outlet Repair Tool Kit with GFCI Receptacle Tester, ET310 RT250 Tool AC Circuit Breaker Finder and Accessories, Electrical Tools Bag Storage Organizer(Box Only)
- Perfect Fit For: This case is specially design for Klein tools ET310 ac circuit breaker finder with integrated GFCI outlet tester, electrical tools case also fits for klein tools 80041 80016 Outlet Repair Tool Kit, RT250 receptacle tester, size: 8.25 x 5.25 x 2.7 inches. For sale is case only, not include the device and other accessories..
- Comprehensive Protection: Circuit breaker finder bag is made of premium and extremely durable hard EVA material, which has a good waterproof and moisture-proof effect. Case for klein circuit tracer can protect for klein et310 from scratching, damaging, impacting, and falling. Please be assured use because of the hard material for klein tools storage case..
- Reasonable Internal Mesh Pocket and Elastic Band Design: Zippered mesh pocket for klein circuit breaker finder case can protect circuit breaker finder accessory kit, circuit breaker leads, circuit breaker adapters from falling and losing. At the same time, the internal independent elastic band is specially designed for et310 klien and outlet tester. Don’t worry about the suitability for et310 klein tools. Elastic band has the function of shrinking and thick elasticity..
- Compact and Convenient Design: Strong and classic zipper for klein breaker finder storage bag i....
Check Stock6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS
- Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
- Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
- Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
- Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
- Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock
