Klotz Snowmobile TechniPlate Synthetic 2-stroke Premix/Injector Oil - 128 ounces
- Identifiable Klotz red...Smells like Klotz.
- Improves throttle response and increases RPMs.
Check StockAtomic Age
- Eliott Paquet, Dominik Wojcik, Niels Schneider (Actors).
- Héléna Klotz (Director) - Héléna Klotz (Writer) - François-Pierre Clavel (Producer).
Check StockPrayers of the Cosmos
- Neil Douglas-Klotz PhD (Author) - Neil Douglas-Klotz PhD (Narrator).
- 09/23/2014 (Publication Date) - Sounds True (Publisher).
Check StockThe Hidden Gospel: Decoding the Message of the Aramaic Jesus
- Neil Douglas-Klotz (Author) - Neil Douglas-Klotz (Narrator).
- 12/17/1999 (Publication Date) - Sounds True (Publisher).
Check StockOutboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check StockOutboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)
- ①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
- ②DETAILS: Model: 4.0 horsepower jet pump.
- Refueling method: No. 92 unleaded gasoline is recommended..
- ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
- Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
- Recommended engine oil: four-stroke engine oil.
- ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
- Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
- The fuel tank of the four-stroke outboard engine can only be filled with....
Check StockGenuine Echo One Gallon Bottle 2 Cycle Engine Oil Power Blend 50 Gal Mix / 6450050
- Genuine Echo One Gallon Bottle 2 Cycle Engine Oil Power Blend 50 Gal Mix / Echo Part # 6450050.
- Ultimate, universal 2-stroke oil manufactured exclusively for ECHO. As a result of extensive research, Power Blend XTended Life Oil is a semi-synthetic blend of oil certified for use in all air-cooled, 2-stroke, outdoor power equipment engines that exceeds ISO-L-EGD and JASO M345/FD requirements. Power Blend XTended Life Oil has superior cleaning capabilities, protects against rust, wear and corrosion, and contains a fuel stabilizer that doubles fuel life..
Check StockBJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System
- 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
- Control System: Tiller control Starting System: Manual start..
- 【Details】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【Advantages】water cooling technology improves the reliability of the whole machine.
- light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
- 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
- after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
- 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check StockMOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)
- Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockSUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red
- Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockTRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)
- 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
- Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check StockMOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)
- MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
- Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock